DOI QR코드

DOI QR Code

Ultimate uplift resistance of circular plate anchors in undrained two-layer clays

  • Park, Su Han (Department of Civil Engineering, University of Seoul) ;
  • Lee, Joon Kyu (Department of Civil Engineering, University of Seoul)
  • 투고 : 2021.05.20
  • 심사 : 2021.10.05
  • 발행 : 2021.11.10

초록

The vertical uplift resistance of circular plate anchors buried in undrained two-layered clays was studied by means of finite element method. Anchors with immediate breakaway (vented) and no breakaway (bonded) are taken into account. The numerical results are given in the form of the breakout factors accounting for the anchor embedment depth, top layer thickness, clay strength ratio, and clay overburden (clay self-weight), which are compared with existing empirical and analytical solutions. It is found that the breakout factors for strong-over-soft clays are greater than those for soft-over-strong clays. Also, the breakout factors of bonded anchors are identical to those of vented anchors with large overburden pressure. Failure patterns are examined for the cases of soft-over-strong clay and strong-over-soft clay, depending on anchor embedment depth and top layer thickness.

키워드

과제정보

The authors acknowledge support in this research for the National Research Foundation of Korea (NRF) (Grant no. 2020R1C1C1005374).

참고문헌

  1. Ali, J.I. (1968), "Pullout resistance of anchor plates and anchored piles in soft bentonite clay", M.Sc. Dissertation, Duke University, Durham, NC.
  2. Ardebili, Z.A., Gabr, M.A. and Rahman, M.S. (2016), "Uplift capacity of plate anchors in saturated clays: Analyses with different constitutive models", Int. J. Geomech., 16(2), 04015053. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000518.
  3. Bhattacharya, P. and Kumar, J. (2016), "Uplift capacity of anchors in layered sand using finite-element limit analysis: formulation and results", Int. J. Geomech., 16(3), 04015078. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000560.
  4. Bouazza, A. and Finlay, T.W. (1990), "Uplift capacity of plate anchors buried in two-layered sand", Geotechnique, 40(2), 293-297. http://doi.org/10.1680/geot.1990.40.2.293.
  5. Brinkgreve, R.B.J., Kumarswamy, S. and Swolfs, W.M. (2016), Plaxis User's Manual, Plaxis BV, Netherlands. http://doi.org/10.1680/geot.1990.40.2.293.
  6. Das, B.M., Shi, E.C., Dass, R.N. and Omar, M.T. (1994), "Suction force below plate anchors in soft clay", Mar. Georesour. Geotechnol., 12(1), 71-81. https://doi.org/10.1080/10641199409388255.
  7. DNV-RP-E302 (2017), Recommended practices: Design and installation of plate anchors in clay, Det Norske Veritas; Oslo, Norway.
  8. Eason, G. and Shield, R.T. (1960), "The plastic indentation of a semi-infinite solid by a perfectly rough circular punch", J. Appl. Math. Phys., 11, 33-43. https://doi.org/10.1007/BF01591800.
  9. Grange, S., Kotronis, P. and Mazars, J. (2009), "A macro-element to simulate 3D soil-structure interaction considering plasticity and uplift", Int. J. Solids Struct., 46(20), 3651-3663. https://doi.org/10.1016/j.ijsolstr.2009.06.015.
  10. Hoelher, M.S. and Eligehausen, R. (2008), "Behavior and testing of anchors in simulated seismic cracks", ACI Structural J., 2008, 105, 348-357.
  11. Keskin, M.S. (2015), "Model studies of uplift capacity behavior of square plate anchors in geogrid-reinforced sand", Geomech. Eng., 8(4), 595-613. http://dx.doi.org/10.12989/gae.2015.8.4.595.
  12. Khatri, V. and Kumar, J. (2009), "Vertical uplift resistance of circular plate anchors in clays under undrained condition", Comp. Geotech., 36, 1352-1359. https://doi.org/10.1016/j.compgeo.2009.06.008.
  13. Kim, Y. and Rosher, L.T. (2019), "Performance of novel dynamic installed anchors during installation and monotonic pullout", Geomech. Eng., 18(2), 153-159. http://dx.doi.org/10.12989/gae. 2019. 18. 2.153.
  14. Kumar, J. (2003), "Uplift resistance of strip and circular anchors in a two layered sand", Soils Found., 43(1), 101-107. https://doi.org/10.3208/sandf.43.101.
  15. Kupferman, M. (1971), "The vertical holding capacity of marine anchors in clay subjected to static and cyclic loading", M.Sc. Dissertation, University of Massachusetts, Amherst, MA.
  16. Merifield, R.S., Lyamin, A.V., Sloan, S.W. and Yu, H.S. (2003), "Three-dimensional lower bound solutions for stability of plate anchors in clay", J. Geotech. Geoenviron. Eng., 129(3), 243-253. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:3(243).
  17. Meyerhof (1973), "Uplift resistance of inclined anchors and piles", Proceedings of 8th International Conference Soil Mechanics and Foundation Engineering, 2(1), 167-172. Moscow, August.
  18. Rao, S.N., Prasad, Y.V.S.N. and Veeresh, C. (1993), "Behavior of embedded model screw anchors in soft clays", Geotechnique, 43(4), 605-614. http://doi.org/10.1680/geot.1993.43.4.605.
  19. Rowe, R.K. and Davis, E.H. (1982), "The behavior of anchor plates in clay", Geotechniq, 9-23. http://doi.org/10.1680/geot.1982.32.1.9.
  20. Sakai, T. and Tanaka, T. (2007), "Experimental and numerical study of uplift behavior of shallow circular anchor in two-layered sand", J. Geotechn. Geoenviron. Eng., 133(4), 469-477. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:4(469).
  21. Singh, S.P. and Ramaswamy, S.V. (2008), "Effect of shape on holding capacity of plate anchors buried in soft soil", Geomech. Geoeng. Int. J., 3(2), 145-154. https://doi.org/10.1080/17486020802126875.
  22. Taiebat, H.A. and Carter, J.P. (2010), "A failure surface for circular footings on cohesive soils", Geotechnique, 64(4), 265-273. http://doi.org/10.1680/geot.7.00062.
  23. Wang D., Hu, Y. and Randolph, M.F. (2010), "Three-dimensional large deformation finite-element analysis of plate anchors in uniform clay", J. Geotech. Geoenviron. Eng., 136(2), 355-365. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000210.
  24. Yu, H.S. (2000), Cavity Expansion Methods in Geomechanics, Kluwer, Dordrecht, Netherlands.
  25. Yu, S.B., Hambleton, J.P. and Sloan, S.W. (2015), "Undrained uplift capacity of deeply embedded strip anchors in non-uniform soil", Comp. Geotech., 72, 41-49. https://doi.org/10.1016/j.compgeo.2015.07.014.
  26. Zhao, X., Randolph, M.F., Wang, D. and Gaudin, C. (2015), "Upper bound analysis of uplift capacity of a tapered plate anchor in cohesive soil", Geotechnique Lett., 5, 205-211. http://doi.org/10.1680/jgele.15.00043.