DOI QR코드

DOI QR Code

Impact of curing time on UCS-electrical resistivity relation of cement grouted sands

  • Choo, Hyunwook (Department of Civil and Environmental Engineering, Hanyang University) ;
  • Lee, Woojin (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Lee, Changho (Department of Civil Engineering, Chonnam National University)
  • 투고 : 2021.03.09
  • 심사 : 2021.10.08
  • 발행 : 2021.11.10

초록

As the curing process proceeds, both the strength and electrical resistivity (ρmix) of cement-based (or cementgrouted) materials increase, leading to the nondestructive ρmix measurement technique is very appealing in the assessment/monitoring of the quality of cement-grouted materials. However, the strength gain of cement-grouted sands with time differs from the increase in ρmix with time. Thus, the relationship between unconfined compressive strength (UCS) and ρmix can be affected by the curing time. This study evaluated the effect of curing time on the relationship between ρmix and UCS of sands grouted with microcement. The ultimate goal of this study is to estimate UCS over time of cement-grouted sands based on ρmix. Three silica sands with different median particle sizes were grouted with microcement at different water-to-cement ratios (wc) of 1.0, 1.5, and 2.0. Both unconfined compression test and electrical resistivity measurement test were conducted. Results demonstrate that curing time, particle size, and wc influenced both ρmix and UCS of tested grouted sands in a similar manner; therefore, a direct relationship between ρmix and UCS can be established. However, the complex impact of curing time on the relation between UCS and ρmix and the nonlinear increase in UCS with time hinder the capture of adequate interplay between UCS, ρmix, and curing time. Because a nonlinear increase in UCS with time can be represented by hyperbolic model, an estimation method for hyperbolic model parameters is newly suggested in this study based on ρmix at early curing days.

키워드

과제정보

This work is supported by a Korea Agency for Infrastructure Technology Advancement (KAIA) grant funded by the Ministry of Land, Infrastructure and Transport (Grant 21SCIP-C151438-03).

참고문헌

  1. Abbasi, N. and Mahdieh, M. (2018), "Improvement of geotechnical properties of silty sand soils using natural pozzolan and lime", Int. J. Geo-Eng., 9(1), 1-12. https://doi.org/10.1186/s40703-018-0072-4.
  2. Archie, G.E. (1942), "The electrical resistivity log as an aid in determining some reservoir characteristics", Transactions American Institute Mining Metallurgical Engineers, 146, 54-61. https://doi.org/10.2118/942054-G.
  3. Avci, E. and Mollamahmutoglu, M. (2016), "UCS roperties of superfine cement-grouted sand", J. Mater. Civil Eng., 28(12), 06016015. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001659.
  4. Berodier, E. and Scrivener, K. (2015), "Evolution of pore structure in blended systems", Cement Concrete Res., 73, 25-35. https://doi.org/10.1016/j.cemconres.2015.02.025.
  5. Bishnoi, S. and Scrivener, K.L. (2009), "Studying nucleation and growth kinetics of alite hydration using µic", Cement Concrete Res., 39(10), 849-860. https://doi.org/10.1016/j.cemconres.2009.07.004.
  6. Cardoso, R. and Dias, A.S. (2017), "Study of the electrical resistivity of compacted kaolin based on water potential", Eng. Geology, 226, 1-11. https://doi.org/10.1016/j.enggeo.2017.04.007.
  7. Cardoso, R., Ribeiro, D. and Neri, R. (2017), "Bonding effect on the evolution with curing time of compressive and tensile strength of sand-cement mixtures", Soils Foundations, 57(4), 655-668. https://doi.org/10.1016/j.sandf.2017.04.006.
  8. Carino, N.J. (1984), "The maturity method: Theory and application", Cement Concrete Aggregates, 6(2), 61-73. https://doi.org/10.1520/CCA10358J.
  9. Choo, H. and Burns, S.E. (2014), "Review of Archie's equation through theoretical derivation and experimental study on uncoated and hematite coated soils", J. Appl. Geophys., 105, 225-234. https://doi.org/10.1016/j.jappgeo.2014.03.024.
  10. Choo, H., Lee, W. and Lee, C. (2018), "Overconsolidation and cementation in sands: Impacts on geotechnical properties and evaluation using dilatometer tests", Geotech. Testing J., 41(5), 915-929. https://doi.org/10.1520/GTJ20170368.
  11. Choo, H., Nam, H. and Lee, W. (2017), "A practical method for estimating maximum shear modulus of cemented sands using unconfined compressive strength", J. Appl. Geophys., 147, 102-108. https://doi.org/10.1016/j.jappgeo.2017.10.012.
  12. Choo, H., Nam, H., Lee, C., Lee, W. and Burns, S. (2019), "Monitoring hydration process and quality of sand grouted with microfine-cement using shear wave velocity and electrical conductivity measurements", Proceedings of E3S Web of Conferences, EDP Sciences, 11012. https://doi.org/10.1051/e3sconf/20199211012.
  13. Consoli, N.C., Cruz, R.C. and Floss, M.F. (2011), "Variables controlling strength of artificially cemented sand: influence of curing time", J. Mater. Civil Eng., 23(5), 692-696. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000205.
  14. Consoli, N.C., Winter, D., Rilho, A.S., Festugato, L. and Teixeira, B.D. (2015), "A testing procedure for predicting strength in artificially cemented soft soils", Eng. Geology, 195, 327-334. https://doi.org/10.1016/j.enggeo.2015.06.005.
  15. Dano, C., Hicher, P.-Y. and Tailliez, S. (2004), "Engineering properties of grouted sands", J. Geotech. Geoenviron. Eng., 130(3), 328-338. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:3(328),
  16. Ferreira, R. M. and Jalali, S. (2010), "NDT measurements for the prediction of 28-day compressive strength", NDT E Int., 43(2), 55-61. https://doi.org/10.1016/j.ndteint.2009.09.003.
  17. Han, J. (2015), Principles and Practice of Ground Improvement, John Wiley and Sons, NJ, USA.
  18. Komine, H. (1997), "Evaluation of chemical grouted soil by electrical resistivity", Proceedings of the Institution of Civil Engineers-Ground Improvement, 1(2), 101-113. https://doi.org/10.1680/gi.1997.010203.
  19. Lee, C., Nam, H., Lee, W., Choo, H. and Ku, T. (2019), "Estimating UCS of cement-grouted sand using characteristics of sand and UCS of pure grout", Geomech Eng, 19(4), 343-352. https://doi.org/10.12989/gae.2019.19.4.343.
  20. Li, Z.J., Xiao, L.Z. and Wei, X.S. (2007), "Determination of concrete setting time using electrical resistivity measurement", J. Mater. Civil Eng., 19(5), 423-427. https://doi.org/10.1061/(Asce)0899-1561(2007)19:5(423),
  21. Lim, S., Lee, W., Choo, H. and Lee, C. (2017), "Utilization of high carbon fly ash and copper slag in electrically conductive controlled low strength material", Construct. Build. Mater., 157, 42-50. https://doi.org/10.1016/j.conbuildmat.2017.09.071.
  22. Liu, S.Y., Du, Y.J., Han, L.H. and Gu, M.F. (2008), "Experimental study on the electrical resistivity of soil-cement admixtures", Environ Geol, 54(6), 1227-1233. https://doi.org/10.1007/s00254-007-0905-5.
  23. Markou, I. and Droudakis, A. (2013), "Factors affecting engineering properties of microfine cement grouted sands", Geotech. Geologic. Eng., 31(4), 1041-1058. https://doi.org/10.1007/s10706-013-9631-9.
  24. Mindess, S., Young, F. and Darwin, D. (2003), Concrete 2nd Edition, Prentice Hall, NJ, USA.
  25. Mollamahmutoglu, M. and Yilmaz, Y. (2011), "Engineering properties of medium-to-fine sands injected with microfine cement grout", Marine Georesourc. Geotechnol., 29(2), 95-109. https://doi.org/10.1080/1064119X.2010.517715.
  26. Nonveiller, E. (2013), Grouting Theory and Practice, Elsevier, Amsterdam, Netherlands.
  27. Pantazopoulos, I., Markou, I., Christodoulou, D., Droudakis, A., Atmatzidis, D., Antiohos, S. and Chaniotakis, E. (2012), "Development of microfine cement grouts by pulverizing ordinary cements", Cement Concrete Compos., 34(5), 593-603. https://doi.org/10.1080/1064119X.2010.517715.
  28. Park, D. and Oh, J. (2018), "Permeation grouting for remediation of dam cores", Eng. Geology, 233, 63-75. https://doi.org/10.1016/j.enggeo.2017.12.011.
  29. Santarato, G., Ranieri, G., Occhi, M., Morelli, G., Fischanger, F. and Gualerzi, D. (2011), "Three-dimensional Electrical Resistivity Tomography to control the injection of expanding resins for the treatment and stabilization of foundation soils", Eng. Geology, 119(1-2), 18-30. https://doi.org/10.1016/j.enggeo.2011.01.009.
  30. Sariosseiri, F. and Muhunthan, B. (2009), "Effect of cement treatment on geotechnical properties of some Washington State soils", Eng. Geology, 104(1-2), 119-125. https://doi.org/10.1016/j.enggeo.2008.09.003.
  31. Scrivener, K. L., Juilland, P. and Monteiro, P. J. (2015), "Advances in understanding hydration of Portland cement", Cement Concrete Res., 78, 38-56. https://doi.org/10.1016/j.cemconres.2015.05.025.
  32. Sun, Z., Ye, G. and Shah, S. P. (2005), "Microstructure and earlyage properties of Portland cement paste-effects of connectivity of solid phases", ACI Mater. J., 102(2), 122-129.
  33. Sunitsakul, J., Sawatparnich, A. and Sawangsuriya, A. (2012), "Prediction of unconfined compressive strength of soil-cement at 7 days", Geotech. Geologic. Eng., 30(1), 263-268. https://doi.org/10.1007/s10706-011-9460-7.
  34. Taylor, M. A. and Arulanandan, K. (1974), "Relationships between electrical and physical properties of cement pastes", Cement Concrete Res., 4(6), 881-897. https://doi.org/10.1016/0008-8846(74)90023-4.
  35. Van Breugel, K. (1993), "Simulation of hydration and formation of structure in hardening cement-based materials", Ph.D. Dissertation, Delft University of Technnology, Netherlands.
  36. Vincent, N. A., Shivashankar, R., Lokesh, K. and Jacob, J. M. (2017), "Laboratory electrical resistivity studies on cement stabilized soil", Int. Scholarly Res. Notices, 2017. https://doi.org/10.1155/2017/8970153.
  37. Voigt, T., Ye, G., Sun, Z. H., Shah, S. P. and van Breugel, K. (2005), "Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation", Cement Concrete Res., 35(5), 858-866. https://doi.org/10.1016/j.cemconres.2004.09.004.
  38. Wei, X. and Li, Z. (2005), "Study on hydration of Portland cement with fly ash using electrical measurement", Mater Struct, 38(277), 411-417. https://doi.org/10.1617/14108.
  39. Wei, X.S., Xiao, L.Z. and Li, Z.J. (2012), "Prediction of standard compressive strength of cement by the electrical resistivity measurement", Construct. Build. Mater., 31, 341-346. https://doi.org/10.1016/j.conbuildmat.2011.12.111.
  40. Won, J., Park, J., Choo, H. and Burns, S. (2019), "Estimation of saturated hydraulic conductivity of coarse-grained soils using particle shape and electrical resistivity", J. Appl. Geophys., 167, 19-25. https://doi.org/10.1016/j.jappgeo.2019.05.013.
  41. Xiao, L. Z. and Li, Z. J. (2009), "New Understanding of Cement Hydration Mechanism through Electrical Resistivity Measurement and Microstructure Investigations", J. Mater. Civil Eng., 21(8), 368-373. https://doi.org/10.1061/(Asce)0899-1561(2009)21:8(368),
  42. Xu, W., Tian, X. and Cao, P. (2018), "Assessment of hydration process and mechanical properties of cemented paste backfill by electrical resistivity measurement", Nondestructive Testing Evaluation, 33(2), 198-212. https://doi.org/10.1080/10589759.2017.1353983.
  43. Ye, G., Van Breugel, K. and Fraaij, A. (2003), "Three-dimensional microstructure analysis of numerically simulated cementitious materials", Cement Concrete Res., 33(2), 215-222. https://doi.org/10.1016/S0008-8846(02)00889-X.
  44. Yoon, B., Lee, W., Lee, C. and Choo, H. (2020), "Time-Dependent Variations of Compressive Strength and Small-Strain Stiffness of Sands Grouted with Microfine Cement", J. Geotech. Geoenviron. Eng., 146(4), 06020001. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002207.
  45. Zhang, D. W., Cao, Z.G., Fan, L.B., Liu, S.Y. and Liu, W.Z. (2014), "Evaluation of the influence of salt concentration on cement stabilized clay by electrical resistivity measurement method", Eng. Geology, 170, 80-88. https://doi.org/10.1016/j.enggeo.2013.12.010.
  46. Zhang, D.W., Chen, L. and Liu, S.Y. (2012), "Key parameters controlling electrical resistivity and strength of cement treated soils", J Cent South Univ, 19(10), 2991-2998. https://doi.org/10.1007/s11771-012-1368-8.