Smart Structures and Systems

  • 제28권5호
  • /
  • Pages.593-603
  • /
  • 2021
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Damage monitoring of variable cross-section region in a column-drilled shaft assembly using smart aggregates

  • Tan, Jie (Hubei Key Laboratory of Earthquake Early Warning, Institute of Seismology) ;
  • Masud, Mahadi (Department of Civil and Environmental Engineering, University of Houston) ;
  • Qin, Xiaoming (Disaster Mitigation for Structure, College of Civil Engineering, Tongji University) ;
  • Yuan, Cheng (Disaster Mitigation for Structure, College of Civil Engineering, Tongji University) ;
  • Kong, Qingzhao (Disaster Mitigation for Structure, College of Civil Engineering, Tongji University) ;
  • Mo, Y.L. (Department of Civil and Environmental Engineering, University of Houston)
  • 투고 : 2020.10.16
  • 심사 : 2021.05.07
  • 발행 : 2021.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

Pier column, as the most critical load-bearing member of bridge, can bear multiple loads including axial forces, shear forces, bending moments, etc. The varied cross section at the column interface and bearing platform or drilled shaft leads to harmful stress concentration that can potentially compromise the structural integrity. In order to improve the ductility of bridge structure, a pier column is often designed with a variable cross-section region to dissipate energy through plastic deformation. For better understanding the health condition of pier column in its service life, it is of great significance to obtain the damage severity information in the variable cross-section region. This study utilizes an active sensing method enabled by distributed Lead Zirconate Titanate (PZT)-based Smart Aggregate (SA) sensors to monitor the damage initiation and development near the bottom of a pier column. Crack damage in variable cross-section region functions as a stress relief that attenuates propagating stress wave energy between SA pairs. Both the numerical and experimental results show that the reduction ratio of the stress wave energy is consistent with the crack development, thus validating the reliability of the investigated approach. SA-based technology can be used as a potential tool to provide early warning of damage in variable cross-section region of bridge structures.

키워드

과제정보

The research described in this paper was supported by the Texas Department of Transportation (Award number 0-6914), U.S., National Natural Science Foundation of China (Grant number 51978507; 52020105005), Science and Technology Commission of Shanghai Municipality (Grant number 19DZ1201200).

참고문헌

  1. Banjara, N.K., Sasmal, S. and Srinivas, V. (2019), "Damage progression study in fibre reinforced concrete using acoustic emission technique", Smart Struct. Syst., Int. J., 23(2), 173-184. https://doi.org/10.12989/sss.2019.23.2.173
  2. Berry, M.P., Lehman, D.E. and Lowes, L.N. (2008), "Lumped-plasticity models for performance simulation of bridge columns", ACI Struct. J., 105(3), 270. https://doi.org/10.14359/19786
  3. Feng, Q., Kong, Q., Huo, L. and Song, G. (2015), "Crack detection and leakage monitoring on reinforced concrete pipe", Smart Mater. Struct., 24(11), 115020. https://doi.org/10.1088/0964-1726/24/11/115020
  4. Feng, Q., Kong, Q. and Song, G. (2016), "Damage detection of concrete piles subject to typical damage types based on stress wave measurement using embedded smart aggregates transducers", Measurement, 88, 345-352. https://doi.org/10.1016/j.measurement.2016.01.042
  5. Feng, Q., Kong, Q., Jiang, J., Liang, Y. and Song, G. (2017), "Detection of interfacial debonding in a rubber-steel-layered structure using active sensing enabled by embedded piezoceramic transducers", Sensors, 17(9), 2001. https://doi.org/10.3390/s17092001
  6. Feng, Q., Tang, M. and Ou, J. (2020), "Monolithic multicore fiber based multi-parameter measurement based on spatial-division-multiplex sensing mechanisms", Measurement, 151, 107128. https://doi.org/10.1016/j.measurement.2019.107128
  7. Gu, H., Moslehy, Y., Sanders, D., Song, G. and Mo, Y.L. (2010), "Multi-functional smart aggregate-based structural health monitoring of circular reinforced concrete columns subjected to seismic excitations", Smart Mater. Struct., 19(6), 065026. https://doi.org/10.1088/0964-1726/19/6/065026
  8. Hou, S., Zhang, H.B. and Ou, J.P. (2012), "A PZT-based smart aggregate for compressive seismic stress monitoring", Smart Mater. Struct., 21(10), 105035. https://doi.org/10.1088/0964-1726/21/10/105035
  9. Hou, S., Zhang, H.B. and Ou, J.P. (2013), "A PZT-based smart aggregate for seismic shear stress monitoring", Smart Mater. Struct., 22(6), 065012. https://doi.org/10.1088/0964-1726/22/6/065012
  10. Howser, R., Moslehy, Y., Gu, H., Dhonde, H., Mo, Y.L., Ayoub, A. and Song, G. (2011), "Smart-aggregate-based damage detection of fiber-reinforced-polymer-strengthened columns under reversed cyclic loading", Smart Mater. Struct., 20(7), 075014. https://doi.org/10.1088/0964-1726/20/7/075014
  11. Huo, L., Cheng, H., Kong, Q. and Chen, X. (2019), "Bond-slip monitoring of concrete structures using smart sensors-A review", Sensors, 19(5), 1231. https://doi.org/10.3390/s19051231
  12. Huynh, T.C., Lee, K.S. and Kim, J.T. (2015), "Local dynamic characteristics of PZT impedance interface on tendon anchorage under prestress force variation", Smart Struct. Syst., Int. J., 15(2), 375-393. http://doi.org/10.12989/sss.2015.15.2.375
  13. Jiang, J., Hei, C., Feng, Q. and Jiang, J. (2019), "Monitoring of epoxy-grouted bonding strength development between an anchored steel bar and concrete using PZT-enabled active sensing", Sensors, 19(9), 2096. https://doi.org/10.3390/s19092096
  14. Jiang, J., Jiang, J., Deng, X. and Deng, Z. (2020), "Detecting debonding between steel beam and reinforcing CFRP plate using active sensing with removable PZT-Based transducers", Sensors, 20(1), 41. https://doi.org/10.3390/s20010041
  15. Karayannis, C.G., Voutetaki, M.E., Chalioris, C.E., Providakis, C.P. and Angeli, G.M. (2015), "Detection of flexural damage stages for RC beams using piezoelectric sensors (PZT)", Smart Struct. Syst., Int. J., 15(4), 997-1018. https://doi.org/10.12989/sss.2015.15.4.997
  16. Kong, Q., Hou, S., Ji, Q., Mo, Y.L. and Song, G. (2013), "Very early age concrete hydration characterization monitoring using piezoceramic based smart aggregates", Smart Mater. Struct., 22(8), 085025. https://doi.org/10.1088/0964-1726/22/8/085025
  17. Kong, Q., Robert, R.H., Silva, P. and Mo, Y.L. (2016), "Cyclic crack monitoring of a reinforced concrete column under simulated pseudo-dynamic loading using piezoceramic-based smart aggregates", Applied Sci., 6(11), 341. https://doi.org/10.3390/app6110341
  18. Kong, Q., Chen, H., Mo, Y.L. and Song, G. (2017a), "Real-time monitoring of water content in sandy soil using shear mode piezoceramic transducers and active sensing-A feasibility study". Sensors, 17(10), 2395. https://doi.org/10.3390/s17102395
  19. Kong, Q., Fan, S., Bai, X., Mo, Y.L. and Song, G. (2017b), "A novel embeddable spherical smart aggregate for structural health monitoring: Part I. Fabrication and electrical characterization", Smart Mater. Struct., 26(9), 095050. https://doi.org/10.1088/1361-665x/aa80bc
  20. Kong, Q., Fan, S., Mo, Y.L. and Song, G. (2017c), "A novel embeddable spherical smart aggregate for structural health monitoring: Part II. Numerical and experimental verifications", Smart Mater. Struct., 26(9), 095051. https://doi.org/10.1088/1361-665x/aa80ef
  21. Kuang, K.S.C. and Cantwell, W.J. (2003), "Use of conventional optical fibers and fiber Bragg gratings for damage detection in advanced composite structures: a review", Appl. Mech. Rev., 56(5), 493-513. https://doi.org/10.1115/1.1582883
  22. Li, H.N., Li, D.S. and Song, G.B. (2004), "Recent applications of fiber optic sensors to health monitoring in civil engineering", Eng. Struct., 26(11), 1647-1657. https://doi.org/10.1016/j.engstruct.2004.05.018
  23. Li, W., Kong, Q., Ho, S.C.M., Mo, Y.L. and Song, G. (2016), "Feasibility study of using smart aggregates as embedded acoustic emission sensors for health monitoring of concrete structures", Smart Mater. Struct., 25(11), 115031. https://doi.org/10.1088/0964-1726/25/11/115031
  24. Liang, Y., Li, D., Parvasi, S.M., Kong, Q. and Song, G. (2016), "Bond-slip detection of concrete-encased composite structure using electro-mechanical impedance technique", Smart Mater. Struct., 25(9), 095003. https://doi.org/10.1088/0964-1726/25/9/095003
  25. Liu, T., Huang, Y., Zou, D., Teng, J. and Li, B. (2013), "Exploratory study on water seepage monitoring of concrete structures using piezoceramic based smart aggregates", Smart Mater. Struct, 22(6), 065002. https://doi.org/10.1088/0964-1726/22/6/065002
  26. Markovic, N., Nestorovic, T. and Stojic, D. (2015), "Numerical modeling of damage detection in concrete beams using piezoelectric patches", Mech. Res. Commun., 64, 15-22. https://doi.org/10.1016/j.mechrescom.2014.12.007
  27. Motaref, S., Saiidi, M.S. and Sanders, D. (2014), "Shake table studies of energy-dissipating segmental bridge columns", J. Bridge Eng., 19(2), 186-199. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000518
  28. Nguyen, K.D., Ho, D.D. and Kim, J.T. (2013), "Damage detection in beam-type structures via PZT's dual piezoelectric responses", Smart Struct. Syst., Int. J., 11(2), 217-240. https://doi.org/10.12989/sss.2013.11.2.217
  29. Pan, X., Liang, D. and Li, D. (2006), "Optical fiber sensor layer embedded in smart composite material and structure", Smart Mater. Struct., 15(5), 1231. https://doi.org/10.1088/0964-1726/15/5/010
  30. Qin, F., Kong, Q., Li, M., Mo, Y.L., Song, G. and Fan, F. (2015), "Bond slip detection of steel plate and concrete beams using smart aggregates", Smart Mater. Struct., 24(11), 115039. https://doi.org/10.1088/0964-1726/24/11/115039
  31. Quant, M., Elizalde, H., Flores, A., Ramirez, R., Orta, P. and Song, G. (2009), "A comprehensive model for piezoceramic actuators: modelling, validation and application", Smart Mater. Struct., 18(12), 125011. https://doi.org/10.1088/0964-1726/18/12/125011
  32. Song, G., Gu, H. and Mo, Y.L. (2008), "Smart aggregates: multifunctional sensors for concrete structures-a tutorial and a review", Smart Mater. Struct., 17(3), 033001. https://doi.org/10.1088/0964-1726/17/3/033001
  33. Wang, F., Huo, L. and Song, G. (2017), "A piezoelectric active sensing method for quantitative monitoring of bolt loosening using energy dissipation caused by tangential damping based on the fractal contact theory", Smart Mater. Struct., 27(1), 015023. https://doi.org/10.1088/1361-665x/aa9a65
  34. Wang, Z., Wei, L. and Cao, M. (2019), "Damage Quantification with Embedded Piezoelectric Aggregates Based on Wavelet Packet Energy Analysis", Sensors, 19(2), 425. https://doi.org/10.3390/s19020425
  35. Wang, F., Chen, Z. and Song, G. (2020), "Monitoring of multi-bolt connection looseness using entropy-based active sensing and genetic algorithm-based least square support vector machine", Mech. Syst. Signal Process., 136, 106507. https://doi.org/10.1016/j.ymssp.2019.106507
  36. Xu, B., Zhang, T., Song, G. and Gu, H. (2013), "Active interface debonding detection of a concrete-filled steel tube with piezoelectric technologies using wavelet packet analysis", Mech. Syst. Signal Process., 36(1), 7-17. https://doi.org/10.1016/j.ymssp.2011.07.029
  37. Yan, S., Sun, W., Song, G., Gu, H., Huo, L.S., Liu, B. and Zhang, Y.G. (2009), "Health monitoring of reinforced concrete shear walls using smart aggregates", Smart Mater. Struct., 18(4), 047001. https://doi.org/10.1088/0964-1726/18/4/047001
  38. Yao, P., Kong, Q., Xu, K., Jiang, T., Huo, L.S. and Song, G. (2015), "Structural health monitoring of multi-spot welded joints using a lead zirconate titanate based active sensing approach", Smart Mater. Struct., 25(1), 015031. https://doi.org/10.1088/0964-1726/25/1/015031
  39. Zeng, L., Parvasi, S.M., Kong, Q., Huo, L., Li, M. and Song, G. (2015), "Bond slip detection of concrete-encased composite structure using shear wave based active sensing approach", Smart Mater. Struct., 24(12), 125026. https://doi.org/10.1088/0964-1726/24/12/125026
  40. Zhang, N. and Su, H. (2017), "Application assessments of concrete piezoelectric smart module in civil engineering", Smart Struct. Syst., Int. J., 19(5), 499-512. https://doi.org/10.12989/sss.2017.19.5.499
  41. Zhang, J., Li, Y., Huang, Y., Jiang, J. and Ho, S.C.M. (2018a), "A feasibility study on timber moisture monitoring using piezoceramic transducer-enabled active sensing", Sensors, 18(9), 3100. https://doi.org/10.3390/s18093100
  42. Zhang, J., Huang, Y. and Zheng, Y. (2018b), "A feasibility study on timber damage detection using piezoceramic-transducer-enabled active sensing", Sensors, 18(5), 1563. https://doi.org/10.3390/s18051563
  43. Zou, D., Du, C., Liu, T. and Li, W. (2019), "Effects of temperature on the performance of the piezoelectric-based smart aggregates active monitoring method for concrete structures", Smart Mater. Struct., 28(3), 035016. https://doi.org/10.1088/1361-665x/aafe15.