Smart Structures and Systems

  • 제28권5호
  • /
  • Pages.689-698
  • /
  • 2021
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Baseline-free damage imaging technique for Lamb wave based structural health monitoring systems

  • Gorgin, Rahim (Faculty of Civil Engineering and Mechanics, Jiangsu University) ;
  • Wang, Ziping (Faculty of Civil Engineering and Mechanics, Jiangsu University)
  • 투고 : 2021.03.25
  • 심사 : 2021.08.06
  • 발행 : 2021.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In Lamb wave based structural health monitoring (SHM) systems, damage scatter signals are usually used for damage identification. Such scatters are obtained by subtracting the current signal from a baseline. However, changes in the environmental condition, particularly temperature, make false scatters in the damage scatter signal. This affects the overall efficiently of the system. To overcome this obstacle, this study proposes a baseline-free damage identification technique. A dual-PZT actuation scheme is applied to generate a comparatively pure A0 mode. A wave velocity determination procedure is then developed to actively determine the velocity of the generated A0 mode in the presence of unmeasured temperature changes. Using a damage scatter separation process, the damage scatter wave is separated from other waves appear in the current signal. Finally, a damage diagnostic image is constructed to illustrate the most probable location of damage. The experimental validation of the developed technique is conducted on two aluminum plates one carrying an L shape crack and the other carrying a hole, subjected to temperatures changes. The experimental results demonstrate the effectiveness of the developed technique for damage identification in the presence of unmeasured temperature. During the proposed procedure no baseline data is used. This bright advantage, qualify the presented technique for practical SHM systems.

키워드

참고문헌

  1. Alem, B., Abedian, A. and Nasrollahi-Nasab, K. (2016), "Reference-free damage identification in plate-like structures using Lamb-wave propagation with embedded piezoelectric sensors", J. Aerosp. Eng., 29(6). https://doi.org/10.1061/(ASCE)AS.1943-5525.0000646
  2. Alguri, K.S., Melville, J. and Harley, J.B. (2018), "Baseline-free guided wave damage detection with surrogate data and dictionary learning", J. Acoust. Soc. Am., 143(6), 3807. https://doi.org/10.1121/1.5042240
  3. Bijudas, C.R., Mitra, M. and Mujumdar, P.M. (2013), "Time reversed Lamb wave for damage detection in a stiffened aluminum plate", Smart Mater. Struct., 22(10), 105026. https://doi.org/10.1088/0964-1726/22/10/105026
  4. Gao, D., Wu, Z., Yang, L. and Zheng, Y. (2018), "Integrated impedance and Lamb wave-based structural health monitoring strategy for long-term cycle-loaded composite structure", Struct. Health Monitor., 17(4), 763-776. https://doi.org/10.1177/1475921717717312
  5. Giurgiutiu, V. (2005), "Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring", J. Intell. Mater. Syst. Struct., 16(4), 291-305. https://doi.org/10.1177/1045389X05050106
  6. Gorgin, R. (2020), "Damage identification technique based on mode shape analysis of beam structures", Structures, 27, 2300-2308. https://doi.org/10.1016/j.istruc.2020.08.034
  7. Gorgin, R., Wu, Z., Gao, D. and Wang, Y. (2014), "Damage size characterization algorithm for active structural health monitoring using the A0 mode of Lamb wave", Smart Mater. Struct., 23(3), 035015. https://doi.org/10.1088/0964-1726/23/3/035015
  8. Gorgin, R., Ma, Y., Wu, Z., Gao, D. and Wang, Y. (2015), "Probabilistic-based damage identification based on error functions with an autofocusing feature", Smart Struct. Syst., Int. J., 15(4), 1121-1137. https://doi.org/10.12989/sss.2015.15.4.1121
  9. Gorgin, R., Luo, Y. and Wu, Z. (2020), "Environmental and operational conditions effects on Lamb wave based structural health monitoring systems: A review", Ultrasonics, 105, 106114. https://doi.org/10.1016/j.ultras.2020.106114
  10. He, J., Rocha, D.C., Leser, P.E., Sava, P. and Leser, W.P. (2019), "Least-squares reverse time migration (LSRTM) for damage imaging using Lamb waves", Smart Mater. Struct., 28(6), 065010. https://doi.org/10.1088/1361-665X/ab14b1
  11. Huang, L., Zeng, L. and Lin, J. (2017), "Baseline-free damage detection in composite plates based on the reciprocity principle", Smart Mater. Struct., 27(1), 015026. https://doi.org/10.1088/1361-665X/aa9cc1
  12. Kudela, P., Radzienski, M., Ostachowicz, W. and Yang, Z. (2018), "Structural health monitoring system based on a concept of Lamb wave focusing by the piezoelectric array", Mech. Syst. Signal Process., 108, 21-32. https://doi.org/10.1016/j.ymssp.2018.02.008
  13. Li, G. and Chattopadhyay, A. (2019), "Reference-free damage localization in time-space domain for structural health monitoring of X-COR sandwich composites", J. Intell. Mater. Syst. Struct., 30(3), 371-385. https://doi.org/10.1177/1045389X18810803
  14. Lize, E., Rebillat, M., Mechbal, N. and Bolzmacher, C. (2018), "Optimal dual-PZT sizing and network design for baseline-free SHM of complex anisotropic composite structures", Smart Mater. Struct., 27(11), 115018. https://doi.org/10.1088/1361-665X/aad534
  15. Miao, X., Wang, D., Ye, L., Lu, Y., Li, F. and Meng, G. (2011), "Identification of dual notches based on time-reversal Lamb waves and a damage diagnostic imaging algorithm", J. Intell. Mater. Syst. Struct., 22(17), 1983-1992. https://doi.org/10.1177/1045389X11421821
  16. Mori, N., Biwa, S. and Kusaka, T. (2019), "Damage localization method for plates based on the time reversal of the mode-converted Lamb waves", Ultrasonics, 91, 19-29. https://doi.org/10.1016/j.ultras.2018.07.007
  17. Muller, A., Soutis, C. and Gresil, M. (2019), "Image reconstruction and characterisation of defects in a carbon fibre/epoxy composite monitored with guided waves", Smart Mater. Struct., 28(6), 065001. https://doi.org/10.1088/1361-665X/ab1359
  18. Park, H.W., Kim, B. and Sohn, H. (2009), "Understanding a time reversal process in Lamb wave propagation", Wave Motion, 46(7), 451-467. https://doi.org/10.1016/j.wavemoti.2009.04.004
  19. Park, S., Lee, C. and Sohn, H. (2010), "Reference-free crack detection using transfer impedances", J. Sound Vib., 329(12), 2337-2348. https://doi.org/10.1016/j.jsv.2009.04.010
  20. Poddar, B., Kumar, A., Mitra, M. and Mujumdar, P.M. (2011), "Time reversibility of a Lamb wave for damage detection in a metallic plate", Smart Mater. Struct., 20(2), 025001. https://doi.org/10.1088/0964-1726/20/2/025001
  21. Qing, X., Li, W., Wang, Y. and Sun, H. (2019), "Piezoelectric transducer-based structural health monitoring for aircraft applications", Sensors, 19(3), 545. https://doi.org/10.3390/s19030545
  22. Qiu, J., Li, F., Abbas, S. and Zhu, Y. (2019), "A baseline-free damage detection approach based on distance compensation of guided waves", J. Low Freq. Noise Vib. Active Control, 38(3-4), 1132-1148. https://doi.org/10.1177/1461348418813699
  23. Wan, H-P., Dong, G-S. and Luo, Y. (2021), "Compressing sensing of wind speed data of large-scale spatial structures with dedicated dictionary using time-shift strategy", Mech. Syst. Signal Process., 157, 107685. https://doi.org/10.1016/j.ymssp.2021.107685
  24. Wan, H-P. and Ni, Y-Q. (2019), "Bayesian multi-task learning methodology for reconstruction of structural health monitoring data", Struct. Health Monitor., 18(4), 1282-1309. https://doi.org/10.1177/1475921718794953
  25. Wan, H-P. and Ni, Y-Q. (2018), "Bayesian modelling approach for forecast of structural stress response using structural health monitoring data", J. Struct. Eng., 144(9). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002085
  26. Wang, J. and Shen, Y. (2019), "An enhanced Lamb wave virtual time reversal technique for damage detection with transducer transfer function compensation", Smart Mater. Struct., 28(8), 085017. https://doi.org/10.1088/1361-665X/ab1fc8
  27. Wang, Q., Ma, S. and Yue, D. (2018a), "Identification of damage in composite structures using Gaussian mixture model-processed Lamb waves", Smart Mater. Struct, 27(4), 045007. https://doi.org/10.1088/1361-665X/aaaf96
  28. Wang, W., Bao, Y., Zhou, W. and Li, H. (2018b), "Sparse representation for Lamb-wave-based damage detection using a dictionary algorithm", Ultrasonics, 87, 48-58. https://doi.org/10.1016/j.ultras.2018.02.011
  29. Wu, Z., Qing, X.P. and Chang, F-K. (2009), "Damage detection for composite laminate plates with a distributed hybrid PZT/FBG sensor network", J. Intell. Mater. Syst. Struct., 20(9). https://doi.org/10.1177/1045389X08101632
  30. Yeum, C.M., Sohn, H., Lim, H.J. and Ihn, J.B. (2014), "Reference free delamination detection using Lamb waves", Struct. Control Health Monitor., 21(5), 675-684. https://doi.org/10.1002/stc.1594
  31. Zeng, L., Lin, J. and Huang, L. (2017), "A modified Lamb wave time-reversal method for health monitoring of composite structures", Sensors, 17(5), 955. https://doi.org/10.3390/s17050955
  32. Zheng, Y., Liu, K., Wu, Z., Gao, D., Gorgin, R., Ma, S. and Lei, Z. (2019), "Lamb waves and electro-mechanical impedance based damage detection using a mobile PZT transducer set", Ultrasonics, 92, 13-20. https://doi.org/10.1016/j.ultras.2018.06.008
  33. Zhou, K., Zheng, Y., Zhang, J., Xu, X., Ma, S. and Wu, Z. (2019), "A reconstruction-based mode separation method of Lamb wave for damage detection in plate structures", Smart Mater. Struct., 28(3), 035033. https://doi.org/10.1088/1361-665X/ab0299
  34. Zhu, R., Huang, G.L. and Yuan, F.G. (2013), "Fast damage imaging using the time-reversal technique in the frequency wavenumber domain", Smart Mater. Struct., 22(7), 075028. https://doi.org/10.1088/0964-1726/22/7/075028.