Acknowledgement
This research was supported by Korea Electric Power Corporation (Grant No. R19XO01-20) and a grant (20RTRP-B146008-03) from the Railroad Technology Research Program funded by the Ministry of Land, Infrastructure and Transport of the Korean government.
References
- Lee, K.-B.: PMSM sensorless control. In: Lee, K.-B. (ed.) Advanced Power Electronics, 1st edn., pp. 317-340. Munundang, Seoul (2019)
- Seo, D.-W., Bak, Y., Lee, K.-B.: An improved rotating restart method for a sensorless permanent magnet synchronous motor drive system using repetitive zero voltage vectors. IEEE Trans Ind Electron 67(5), 3496-3504 (2020) https://doi.org/10.1109/tie.2019.2914647
- Cho, Y., Lee, K.-B., Song, J.-H., Lee, Y.I.: Torque-ripple minimization and fast dynamic scheme for torque predictive control of permanent-magnet synchronous motors. IEEE Trans Power Electron 30(4), 2182-2190 (2015) https://doi.org/10.1109/TPEL.2014.2326192
- Bak, Y., Lee, K.-B.: Constant speed control of a permanent-magnet synchronous motor using a reverse matrix converter under variable generator input conditions. IEEE J Emerg Sel Topics Power Electron 6(1), 315-326 (2018) https://doi.org/10.1109/jestpe.2017.2715046
- Cho, D.-H., Bak, Y., Lee, K.-B.: Method of estimating initial rotor position for IPMSMs using subdivided voltage vectors based on inductance variation. J Power Electron 20(5), 1195-1205 (2020) https://doi.org/10.1007/s43236-020-00108-5
- Chen, Q., Zou, Z.: Lumped-parameter thermal analysis and experimental validation of interior IPMSM for electric vehicle. J. Electr. Eng. Technol. 13(6), 2276-2283 (2018) https://doi.org/10.5370/JEET.2018.13.6.2276
- Jin, N., Li, G., Zhou, K., Liu, J., Iu, H.H.-C.: MTPA trajectory tracking control with on-line MRAS parameter identification for an IPMSM. J Electr Eng Technol 14(6), 2355-2366 (2019) https://doi.org/10.1007/s42835-019-00276-w
- Zhang, W., Xiao, F., Liu, J., Mai, Z., Li, C.: Maximum torque per ampere control for IPMSM traction system based on current angle signal injection method. J Electr Eng Technol 15(4), 1681-1691 (2020) https://doi.org/10.1007/s42835-020-00434-5
- Sul, S.-K., Kwon, Y.-C., Lee, Y.: Sensorless control of IPMSM for last 10 years and next 5 years. CES Trans Elect Mach Syst 1(2), 91-99 (2017) https://doi.org/10.23919/tems.2017.7961290
- Lee, K.-G., Lee, J.-S., Lee, K.-B.: Wide-range sensorless control for SPMSM using an improved full-order flux observer. J Power Electron 15(3), 721-729 (2015) https://doi.org/10.6113/JPE.2015.15.3.721
- Shen, H., Xu, J., Yu, B., Tang, Q., Chen, B., Lou, C., Qiao, Y.: Seamless transition strategy for wide speed-range sensorless IPMSM drives with a virtual q-axis inductance. J Power Electron 19(5), 1224-1234 (2019) https://doi.org/10.6113/jpe.2019.19.5.1224
- Hamidani, B., Allag, A., Allag, A., Zeghib, O.: Sensorless non-linear control applied to a PMSM machine based on new extended MVT observer. J Electr Eng Technol 14(4), 1615-1623 (2019) https://doi.org/10.1007/s42835-019-00149-2
- Morimoto, S., Kawamoto, K., Sanada, M., Takeda, Y.: Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame. IEEE Trans Ind Appl 38(4), 1054-1061 (2002) https://doi.org/10.1109/TIA.2002.800777
- Lee, Y.-J., Bak, Y., Lee, K.-B.: Restarting method for EEMF based sensorless permanent magnet synchronous motor drive systems. Trans. Korean Inst Power Electr 24(2), 127-133 (2019) https://doi.org/10.6113/TKPE.2019.24.2.127
- Chen, Z., Tomita, M., Doki, S., Okuma, S.: An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors. IEEE Trans Ind Electron 50(2), 288-295 (2003) https://doi.org/10.1109/TIE.2003.809391
- Han, D.-Y., Cho, Y., Lee, K.-B.: Simple sensorless control of interior permanent magnet synchronous motor using PLL based on extended EMF. J Electr Eng Technol 12(2), 711-717 (2017) https://doi.org/10.5370/JEET.2017.12.2.711
- Wang, S., Yang, K., Chen, K.: An improved position-sensorless control method at low speed for PMSM based on high-frequency signal injection into a rotating reference frame. IEEE Access 7, 86510-86521 (2019) https://doi.org/10.1109/access.2019.2925214
- Yoon, T.-M., Lee, J.-S., Lee, K.-B.: Rotor position estimation method of IPMSM using HF signal injection and sliding-mode controller. IEEJ Trans Electr Electron Eng 9(S1), S56-S63 (2014)
- Kim, S., Ha, J.-I., Sul, S.-K.: PWM switching frequency signal injection sensorless method in IPMSM. IEEE Trans Ind Appl 48(5), 1576-1587 (2012) https://doi.org/10.1109/TIA.2012.2210175
- Alaei, A., Lee, D.-H., Ahn, J.-W., Nejad, S.M.S.: Sensorless control of IPMSM with a simplified high- frequency square wave injection method. J Electr Eng Technol 13(4), 1515-1527 (2018) https://doi.org/10.5370/JEET.2018.13.4.1515
- Wang, G., Yang, L., Yuan, B., Wang, B., Zhang, G., Xu, D., Xu, P., Zhu, Z.Q.: Pseudo-random high-frequency square-wave voltage injection based sensorless control of IPMSM drives for audible noise reduction. IEEE Trans Ind Electron 63(12), 7423-7433 (2016) https://doi.org/10.1109/TIE.2016.2594171
- Wang, G., Kuang, J., Zhao, N., Zhang, G., Xu, D., Nakashima, S., Inagaki, Y., Miki, I.: Rotor position estimation of PMSM in low-speed region and standstill using zero-voltage vector injection. IEEE Trans Power Electron 33(9), 7948-7958 (2018) https://doi.org/10.1109/tpel.2017.2767294
- Xu, P.L., Zhu, Z.Q.: Novel carrier signal injection method using zero-sequence voltage for sensorless control of PMSM drives. IEEE Trans Ind Electron 63(4), 2503-2061 (2016) https://doi.org/10.1109/TED.2016.2556709
- Xu, P.L., Zhu, Z.Q.: Novel square-wave signal injection method using zero-sequence voltage for sensorless control of PMSM drives. IEEE Trans Ind Electron 63(12), 7444-7454 (2016) https://doi.org/10.1109/TIE.2016.2593657
- Sim, H.-W., Lee, J.-S., Lee, K.-B.: A simple strategy for sensorless speed control for an IPMSM during startup and over wide speed range. J Electr Eng Technol 9(5), 1582-1591 (2014) https://doi.org/10.5370/JEET.2014.9.5.1582
- Wang, K., Chen, B., Shen, G., Yao, W., Lee, K.: Online updating of rotor time constant based on combined voltage and current mode flux observer for speed-sensorless AC drives. IEEE Trans Ind Electron 61(9), 4583-4593 (2014) https://doi.org/10.1109/TIE.2013.2288227
- Han, D.-Y., Yoon, J.-S., Cho, Y., Lee, K.-B., Lee, C.-H., Lee, J.: Improved transition method for sensorless operation of interior permanent magnet synchronous motor drives. Trans Korean Inst Power Electr 65(8), 1362-1368 (2016)
- Ide, K., Ha, J.-I., Sawamura, M.: A hybrid speed estimator of flux observer for induction motor drives. IEEE Trans Ind Electron 53(1), 130-137 (2006) https://doi.org/10.1109/TIE.2005.862306
- Yang, S.C., Hsu, Y.L.: Full speed range sensorless drive of permanent-magnet machine combining saliency-based and back-EMF-based drive. IEEE Trans Ind Electron 64(2), 130-137 (2017) https://doi.org/10.1109/TED.2016.2633388