Structural Engineering and Mechanics

  • 제80권3호
  • /
  • Pages.355-363
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Tensile behavior of bolted through-diaphragm connections to SHS columns

  • Qin, Ying (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Zhang, Jingchen (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Chen, Yifu (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Shi, Peng (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Xu, Yaohan (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Shi, Zuozheng (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
  • 투고 : 2021.01.07
  • 심사 : 2021.09.24
  • 발행 : 2021.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

Steel hollow section (SHS) columns have been increasingly popular in structural systems due to high compressive capacity, excellent torsional strength, and symmetric bending stiffness. In moment-resisting frames, the structural performance of connections to SHS columns is important to ensure the ability to carry bending moment. Conventional connections utilize welds to connect the adjacent components to the columns. Brittle fracture often initiates at the welds and reduces the ductility of connections. In this research, bolted connections were proposed to connect the beam to the SHS column through through-diaphragm. Tensile tests were conducted on four specimens to evaluate the structural behavior of connections. Failure mode, load-displacement response, strength, stiffness, and ductility were analyzed. The test results showed that the specimens were failed by the necking down of the flange plate. All specimens had high load-carrying capacity and good ductility. Strain distributions at key locations were investigated to study the force flow path. The application of through-diaphragm was found to deliver the tensile load to larger area and thus reduced the stress concentration at the connecting zone. Moreover, large amount of stress was transferred directly through the diaphragm, and the required stress demand for the SHS column was decreased. Design method was then proposed to predict the yield and the ultimate strength of the bolted connections. Good agreement was found between the experimental results and the theoretical predictions.

키워드

과제정보

This work is sponsored by the National Natural Science Foundation of China (Grant No. 52008091 and 52178117), the Opening Fund of State Key Laboratory of Green Building in Western China (Grant No. LSKF202103), and Key Laboratory of Civil Engineering Structure and Mechanics, Inner Mongolia University of Technology (Grant No. 2021KF003). The authors would like to thank Jing-Rong Wang of Hohai University for his assistance with the laboratory work.

참고문헌

  1. AISC 358-16 (2016), Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, American Institute of Steel Construction, Chicago, IL, USA.
  2. Akagwu, P., Ali, F. and Nadjai, A. (2020), "Behaviour of bolted steel splice connections under fire", J. Constr. Steel Res., 170, 106103. https://doi.org/10.1016/j.jcsr.2020.106103.
  3. Alhendi, H. and Celikag, M. (2015), "Behavior of reverse-channel and double-reverse-channel connections to tubular columns with HSS", J. Constr. Steel Res., 112, 271-281. https://doi.org/10.1016/j.jcsr.2015.05.017.
  4. Bai, Y.T., Wang, S.H., Mou, B., Wang, Y. and Skalomenos, K.A. (2021), "Bi-directional seismic behavior of steel beam-column connections with outer annular stiffener", Eng. Struct., 227, 111443. https://doi.org/10.1016/j.engstruct.2020.111443.
  5. Beena, K., Naveen, K. and Shruti, S. (2017), "Behaviour of bolted connections in concrete-filled steel tubular beam-column joints", Steel Compos. Struct., 25(4), 443-456. https://doi.org/10.12989/scs.2017.25.4.443.
  6. Chen, Y.S., Hou, C. and Peng, J.H. (2019), "Stability study on tenon-connected SHS and CFST columns in modular construction", Steel Compos. Struct., 30(2), 185-199. https://doi.org/10.12989/scs.2019.30.2.185.
  7. Chen, Z.H., Wang, J., Liu, J.D. and Cong, Z.Y. (2020), "Tensile and shear performance of rotary inter-module connection for modular steel buildings", J. Constr. Steel Res., 175, 106367. https://doi.org/10.1016/j.jcsr.2020.106367.
  8. Doung, P. and Sasaki, E. (2019), "Load-deformation characteristics and performance of internal diaphragm connections to box columns", Thin Wall Struct., 143, 106221. https://doi.org/10.1016/j.tws.2019.106221.
  9. Ebrahimi, S., Zahrai, S.M. and Mirghaderi, S.R. (2019), "Numerical study on force transfer mechanism in through gusset plates of SCBFs with HSS columns & beams", Steel Compos. Struct., 31(6), 541-558. https://doi.org/10.12989/scs.2019.31.6.541.
  10. FEMA-355D (2000), State of the Art Report on Connection Performance, Federal Emergency Management Agency, USA.
  11. Feng, S.K., Liu, Z.X., Zhou, X.J. and Guo, Z.X. (2020), "Seismic performance of curved haunched connections in modularized prefabricated steel structures", J. Constr. Steel Res., 172, 106188. https://doi.org/10.1016/j.jcsr.2020.106188.
  12. GB/T 2957-2018 (2018), Steel and Steel Products-Location and Preparation of Samples and Test Pieces for Mechanical Testing, China Standards Press, Beijing, China.
  13. Gerbo, E.J., Thrall, A.P. and Zoli, T.P. (2020), "Adjustable bolted steel plate connection: measured behavior of bolts during field installation and numerical parametric investigation", J. Struct. Eng., 146(2), 04019189. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002440.
  14. Guo, H.C., Xie, Y., Liu, Y.H. and Yang, D.X. (2020), "Study on mechanical behavior of Q690D high strength steel bearing-type bolted connections", Struct., 23, 588-601. https://doi.org/10.1016/j.istruc.2019.12.002.
  15. Jia, L.J., Koyama, T. and Kuwamura, H. (2014), "Experimental and numerical study of postbuckling ductile fracture of heat-treated SHS stub columns", J. Struct. Eng., 140(7), 04014044. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001056.
  16. Jiao, W.F., Wang, W., Chen, Y.Y. and Teh, L.H. (2020), "Seismic performance of concrete-filled SHS column-to-beam connections with slip-critical blind bolts", J. Constr. Steel Res., 170, 106075. https://doi.org/10.1016/j.jcsr.2020.106075.
  17. Keykha, A.H. (2017), "Numerical investigation of SHS steel beam-columns strengthened using CFRP composite", Steel Compos. Struct., 25(5), 593-601. https://doi.org/10.12989/scs.2017.25.5.593.
  18. Kian, A.R.T. and Deylami, A. (2019), "Rib-reinforced moment connection of steel beam to box column", Inst. Civil Eng.- Struct. Build., 172(6), 407-421. https://doi.org/10.1680/jstbu.17.00125.
  19. Kim, T., Hwang, B. and Lim, Y. (2020), "Development on ultimate strength equation of ferritic stainless steel (STS430) two-bolted connection", Adv. Struct. Eng., 23(6), 1209-1223. https://doi.org/10.1177/1369433219891592.
  20. Kim, T., Stojadinovic, B. and Whittaker, A.S. (2008), "Seismic performance of pre-northridge welded steel moment connections to built-up box columns", J. Struct. Eng., 134(2), 289-299. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(289).
  21. Lee, C.H., Jung, J.H. and Kim, S.Y. (2019), "Cyclic seismic performance of wea-axis RBS welded steel moment connections", Int. J. Steel Struct., 19(5), 1592-1604. https://doi.org/10.1007/s13296-019-00233-3.
  22. Li, G.Q., Liu, K., Wang, Y.B. and Dai, Z.Q. (2019), "Moment resistance of blind-bolted SHS column splice joint subjected to eccentric compression", Thin Wall Struct., 141, 184-193. https://doi.org/10.1016/j.tws.2019.04.015.
  23. Li, L., Wang W., Chen, Y.Y. and Teh, L.H. (2017), "Column-wall failure mode of steel moment connection with inner diaphragm and catenary mechanism", Eng. Struct., 131, 553-563. https://doi.org/10.1016/j.engstruct.2016.10.032.
  24. Li, W., Xu, L.F. and Qian, W.W. (2020), "Seismic performance of concrete-encased CFST column to steel beam joints with different connection details", Eng. Struct., 204, 109875. https://doi.org/10.1016/j.engstruct.2019.109875.
  25. Liu, J.P., He, W.R., Cheng, G.Z. and Chen, Y.F. (2020), "Seismic behavior of large-diameter CFTST column to steel beam connections", J. Constr. Steel Res., 175, 106338. https://doi.org/10.1016/j.jcsr.2020.106338.
  26. Luo, F.J., Ding, C.T., Styles, A. and Bai, Y. (2019), "End plate-stiffener connection for SHS column and RHS beam in steel-framed building modules", Int. J. Steel Struct., 19(4), 1353-1365. https://doi.org/10.1007/s13296-019-00214-6.
  27. Mahmood, M., Elamin, A. and Tizani, W. (2020), "Ultimate strength and fracture sequence of bolted connections to thin-walled carbon steel", Struct., 23, 646-659. https://doi.org/10.1016/j.istruc.2019.11.011.
  28. Mahmood, S.Q., Schumacher, T., Dusicka, P. and Zareh, H. (2020), "Structural behavior of bolted steel lap shear connections with thermally insulating filler plates", J. Constr. Steel Res., 167, 105852. https://doi.org/10.1016/j.jcsr.2019.105852.
  29. Mansouri, I., Shahbazi, S., Hu, J.W. and Moghaddam S.A. (2019), "Effects of pulse-like nature of forward directivity ground motions on the seismic behavior of steel moment frames", Earthq. Struct., 17(1), 1-15. https://doi.org/10.12989/eas.2019.17.1.001.
  30. Matti, F.N. and Mashiri, F.R. (2020), "Parametric study on SCFs of SHS-SHS T-joint connections under out-of-plane brace bending", Eng. Struct., 221, 111032. https://doi.org/10.1016/j.engstruct.2020.111032.
  31. Mehr, S.M.R.F. and Ghobadi, M.S. (2017), "Seismic performance of retrofitted WFP connections joined to box column using ribs", J. Constr. Steel Res., 137, 297-310. https://doi.org/10.1016/j.jcsr.2017.06.033.
  32. Meng, X. and Gardner, L. (2020), "Behavior and design of normal- and high-strength steel SHS and RHS columns", J. Struct. Eng., 146(11), 04020227. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002728.
  33. Mirza, O. and Kaewunruen, S. (2018), "Influence of shear bolt connections on modular precast steel-concrete composites for track support structures", Steel Compos. Struct., 27(5), 647-659. https://doi.org/10.12989/scs.2018.27.5.647.
  34. Nie, J.G., Qin, K. and Cai, C.S. (2009), "Seismic behavior of composite connections - flexural capacity analysis", J. Constr. Steel Res., 65(5), 1112-1120. https://doi.org/10.1016/j.jcsr.2008.12.003.
  35. Nunez, E., Torres, R. and Herrera, R. (2017), "Seismic performance of moment connections in steel moment frames with HSS columns", Steel Compos. Struct., 25(3), 271-286. https://doi.org/10.12989/scs.2017.25.3.271.
  36. Qin Y., Zhang, J.C., Shi, P., Chen, Y.F., Xu, Y.H. and Shi, Z.Z. (2018), "Behavior of improved through-diaphragm connection to square tubular column under tensile loading", Struct. Eng. Mech., 68(4), 475-483. https://doi.org/10.12989/sem.2018.68.4.475.
  37. Qin, Y., Chen, Z.H. and Wang, X.D. (2014b), "Elastoplastic behavior of through-diaphragm connections to concrete-filled rectangular steel tubular columns", J. Constr. Steel Res., 93, 88-96. https://doi.org/10.1016/j.jcsr.2013.10.011.
  38. Qin, Y., Chen, Z.H., Yang, Q.Y. and Shang, K.J. (2014a), "Experimental seismic behavior of through-diaphragm connections to concrete-filled rectangular steel tubular columns", J. Constr. Steel Res., 93, 32-43. https://doi.org/10.1016/j.jcsr.2013.10.020.
  39. Rezaifar, O., Nazari, M. and Gholhaki, M. (2017), "Experimental study of rigid beam-to-box column connections with types of internal/external stiffeners", Steel Compos. Struct., 25(5), 535-544. https://doi.org/10.12989/scs.2017.25.5.535.
  40. Rong, B., You, G., Zhang, R., Ma, X. and Quan, X. (2018), "Experimental and theoretical studies on SHS column connection with external stiffening ring under static tension load", Steel Compos. Struct., 28(2), 167-177. https://doi.org/10.12989/scs.2018.28.2.167.
  41. Sayed, A.M. (2021), "Tensile capacity of steel plate connections with different bolt distribution due to tensile load", J. Eng. Sci. Tech., 16(2), 888-902.
  42. Shahraki, M., Sohrabi, M.R., Aziaian, G. and Narmashiri, K. (2018), "Experimental and numerical investigation of strengthened deficient steel SHS columns under axial compressive loads", Struct. Eng. Mech., 67(2), 207-217. https://doi.org/10.12989/sem.2018.67.2.207.
  43. Sharbati, R., Hayati, Y. and Hadianfard, M.A. (2019), "Numerical investigation on the cyclic behavior of post-tensioned steel moment connections with bolted angles", Int. J. Steel Struct., 19(6), 1840-1853. https://doi.org/10.1007/s13296-019-00247-x.
  44. Suita, K., Nakashima, M. and Engelhardt, M.D. (2000), "Comparison of seismic capacity between post-Northridge and post-Kobe beam-to-column connections", Proceedings of the 3rd International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA 2000), Montreal, Canada.
  45. Tsai, K.C. (1992), "Design of steel beam-to-box column connections for seismic load", Proceeding of the 1st World Conference on Constructional Steel Design, Acapulco, Mexico, December.
  46. Wang, J.F. and Guo, L. (2020), "Experimental and analytical behavior of square CFDST column blind bolted to steel beam connections", Int. J. Steel Struct., 20(2), 612-635. https://doi.org/10.1007/s13296-020-00310-y.
  47. Wu, L., Wang, X.D., Luo, S., Wang, X., Cui, D.B. and Chen, Z.H. (2015), "Experimental research on seismic performance of the full-bolted diaphragm-through connection to RCFST", Adv. Struct. Eng., 18(7), 959-973. https://doi.org/10.1260/1369-4332.18.7.959.
  48. Yang, B., Shen, L., Kang, S.B., Elchalakani, M. and Nie, S.D. (2018), "Load bearing capacity of welded Q460GJ steel H-columns under eccentric compression", J. Constr. Steel Res., 2018, 143, 320-330. https://doi.org/10.1016/j.jcsr.2018.01.011.
  49. Yu, J.G., Yu, H.S., Feng, X.T., Dang, C., Hou, T.F. and Shen, J. (2020), "Behaviour of steel plate shear walls with different types of partially-encased H-section columns", J. Constr. Steel Res., 170, 106123. https://doi.org/10.1016/j.jcsr.2020.106123.
  50. Zhang, A.L., Ma, X.F., Fang, H., Mu, J.L. and Liu, T.Y (2018), "Seismic behaviour of connections between prefabricated RC flat slabs and square steel tube columns", Eng. Struct., 173, 800-812. https://doi.org/10.1016/j.engstruct.2018.07.040.
  51. Zhu, A.Z., Zhu, H.P., Zhang, X.W. and Lu, Y. (2016), "Experimental study and analysis of inner-stiffened cold-formed SHS steel stub columns", Thin Wall Struct., 107, 28-38. https://doi.org/10.1016/j.tws.2016.04.026.
  52. Zhu, W.Q., Mo, Z.P., Liu, Y.J. and Cui, Y. (2021), "Tensile behavior and load transfer mechanism of concrete-filled square steel tube exterior-diaphragm connections stiffened with PBL", Eng. Struct., 231, 111780. https://doi.org/10.1016/j.engstruct.2020.111780.