DOI QR코드

DOI QR Code

Field implementation of low-cost RFID-based crack monitoring using machine learning

  • Fils, Pierredens (Department of Civil and Environmental Engineering, University of Connecticut) ;
  • Jang, Shinae (Department of Civil and Environmental Engineering, University of Connecticut) ;
  • Sherpa, Rinchen (Department of Civil and Environmental Engineering, University of Connecticut)
  • 투고 : 2021.02.24
  • 심사 : 2021.07.20
  • 발행 : 2021.09.25

초록

As civil infrastructure continues to age, the extension of service life has become a financially attractive solution due to cost savings on reconstruction projects. Efforts to increase the service life of structures include non-destructive evaluation (NDE) and structural health monitoring (SHM) techniques. Nonetheless, visual inspection is more frequently used due to high equipment cost from other techniques and federal biennial inspection requirement. Recently, low-cost Radio Frequency Identification Devices (RFID) have drawn attention for crack monitoring; however, it was yet to be implemented in the field. This paper presents a crack monitoring algorithm using a developed RFID-based sensing system employing machine learning under temperature variations for field implementation. Two reinforced concrete buildings were used as testbeds: a parking garage, and a residential building with crumbling foundation phenomenon. An Artificial Neural Network (ANN)-based crack monitoring architecture is developed as the machine learning algorithm and the results are compared to a baseline model. The results show promise for field implementation of crack monitoring on building structures.

키워드

과제정보

This research has been supported in part by the Bridge to Doctorate program by National Science Foundation (award# 1702132) and the IDEA grant (cohort 15) for undergraduate student research at the University of Connecticut. In addition, the authors acknowledge the generous support and access to their home with crumbling foundation from an anonymous resident in Coventry, CT, and arrangement with Connecticut Transportation Institute (Director: James Mahoney).

참고문헌

  1. Amajama, J. (2016), "Impact of weather components on (UHF) radio signal", Int. J. Eng. Res. General Sci., 4(3), 481-494.
  2. ASCE (2017), Report Card for America's Infrastructure; American Society of Civil Engineers; Reston, Washington, DC, USA. https://www.infrastructurereportcard.org/wp-content/uploads/2016/10/2017-Infrastructure-Report-Card.pdf
  3. ATID (2017), All the Identification AT870N Guide for Customer; All the Identification, Seoul, Korea. https://channel.invengo.com/download/support/AT870N_WinCE_User-Guide-2017-05_Eng.pdf
  4. AtlasRFIDstore (2019), Alien Short RFID White Wet Inlay, ALN-9662, Higgs; AtlasFRIDstore, Alabama, USA. http://www.atlasrfidstore.com/alien-short-rfid-white-wet-inlay-aln-9662-higgs-3/
  5. Brownlee, J. (2018), How to Choose Loss Functions When Training Deep Learning Neural Networks; Machine Learning Mastery, San Juan, Puerto Rico. https://machinelearningmastery.com/how-to-choose-loss-functions-when-training-deep-learning-neural-networks/
  6. Bruciati, B., Jang, S. and Fils, P. (2019), "RFID-based crack detection of ultra high-performance concrete retrofitted beams", Sensors, 19(7), 1573. https://doi.org/10.3390/s19071573
  7. Daniels, J. (2020), Ground Penetrating Radar; U.S. Environmental Protection Agency, Washington, DC, USA. https://clu-in.org/characterization/technologies/gpr.cfm
  8. Dormehl, L. (2019), "What is an Artificial Neural Network? Here's Everything You Need to Know", In: Digital Trends, Bristol, UK. https://www.digitaltrends.com/cool-tech/what-is-an-artificial-neural-network/
  9. Duchesne, J. and Fournier, B. (2013), "Deterioration of concrete by the oxidation of sulphide minerals in the aggregate", J. Civil Eng. Architect., 7(8), 922. https://doi.org/10.17265/1934-7359/2013.08.003
  10. Elshafey, A.A., Haddara, M.R. and Marzouk, H. (2010), "Damage detection in offshore structures using neural networks", Marine Struct., 23(1), 131-145. https://doi.org/10.1016/j.marstruc.2010.01.005
  11. Federal Highway Administration (2001), Reliability of Visual Inspection for Highway Bridges: FHWA-RD-01-020. https://www.fhwa.dot.gov/publications/research/nde/pdfs/01020a.pdf
  12. Fils, P.D. and Jang, S. (2020), "Wireless crack detection of a concrete building using low-cost RFID tags", In: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems.
  13. Giurgiutiu, V. and Craig, A.R. (1997), "Electro-mechanical (E/M) impedance method for structural health monitoring and non-destructive evaluation", International Workshop on Structural Health Monitoring, Stanford University, CA, USA, September.
  14. Giurgiutiu, V. and Zagrai, A. (2005), "Damage detection in thin plates and aerospace structures with the electro-mechanical impedance method", Struct. Health Monitor., 4(2), 99-118. https://doi.org/10.1177/1475921705049752
  15. Gobi, M. and Ashe, B. (2019), "Final Report of the Special Commission to Study the Financial and Economic Impacts of Crumbling Concrete Foundations due to the Presence of Pyrrhotite", Special Commission, The General Court, Commonwealth of Massachusetts.
  16. Helwig, N.E. (2017), "Multivariate linear regression", University of Minnesota, Minneapolis and Saint Paul, MN, USA. http://users.stat.umn.edu/~helwig/notes/mvlr-Notes.pdf
  17. Holleran, L. (2020), "Crumbling foundations", Connecticut State Department of Housing, Hartford, CT, USA. https://portal.ct.gov/DOH/DOH/Programs/Crumbling-Foundations
  18. Kalansuriya, P., Bhattacharyya, R. and Sarma, S. (2013), "RFID tag antenna-based sensing for pervasive surface crack detection", IEEE Sensors J., 13(5), 1564-1570. https://doi.org/10.1109/jsen.2013.2240155
  19. Keras (2015), Keras documentation: Losses; Mountain View, CA, USA. https://keras.io/api/losses/
  20. Leonel, J. (2019), Hyperparameters in Machine/Deep Learning; Sao Paulo, Brazil. https://medium.com/@jorgesleonel
  21. Lienert, P. and Lee, J.L (2020), "Lidar laser-sensing technology: From self-driving cars to dance contests", Reuters, Las Vegas, NV, USA. https://www.reuters.com/article/us-tech-ces-lidar/lidar-laser-sensing-technology-from-self-driving-cars-to-dance-contests-idUSKBN1Z62AS
  22. Marindra, A.M.J. and Tian, G.Y. (2019), "Multiresonance chipless RFID sensor tag for metal defect characterization using principal component analysis", IEEE Sensors J., 19(18), art. 8718341, 8037-8046. https://doi.org/10.1109/jsen.2019.2917840
  23. Marindra, A.M.J., Sutthaweekul, R. and Tian, G.Y. (2018), "Depolarizing chipless RFID sensor tag for characterization of metal cracks based on dual resonance features", In: International Conference on Information Technology and Electrical Engineering: Smart Technology for Better Society, ICITEE 2018, 8534943, 73-78. https://doi.org/10.1109/iciteed.2018.8534943
  24. Martinez-Castro, R.E., Jang, S., Nicholas, J. and Bansal, R. (2017), "Experimental assessment of an RFID-based crack sensor for steel structures", Smart Mater. Struct., 26(8), art. 085035. https://doi.org/10.1088/1361-665x/aa7cd8
  25. Medeiros, R.D., Ribeiro, M.L. and Tita, V. (2014), "Computational methodology of damage detection on composite cylinders: structural health monitoring for automotive components", Int. J. Automotive Compos., 1(1), 112. https://doi.org/10.1504/IJAUTOC.2014.064159
  26. Muller, M., Mitton, D., Talmant, M., Johnson, P. and Laugier, P. (2008), "Nonlinear ultrasound can detect accumulated damage in human bone", Journal of Biomech., 41(5), 1062-1068. https://doi.org/10.1016/j.jbiomech.2007.12.004
  27. Park, G., Sohn, H., Farrar, C.R. and Inman, D.J. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib. Digest, 35(6), 451-464. https://doi.org/10.1177/05831024030356001
  28. Raju, V. (1998), "Impedance-based health monitoring technique of composite reinforced structure." Proceedings of the 9th International Conference on Adaptive Structures and Technologies, Cambridge, MA, USA, October. https://ci.nii.ac.jp/naid/10029700000
  29. Ruder, S. (2017), An overview of gradient descent optimization algorithms; Dublin, Ireland. https://arxiv.org/pdf/1609.04747.pdf
  30. Schaefer, B. and Schaefer, J. (2020), "Crumbling Foundations", Schaefer Inspection Service, Inc., Woodbridge, CT, USA. https://mhschaefer.com/crumblingfoundations-2/
  31. Sepehry, N., Shamshirsaz, M. and Abdollahi, F. (2011), "Temperature variation effect compensation in impedance-based structural health monitoring using neural networks", J. Intel. Mat. Syst. Str., 20(10), 1-8. https://doi.org/10.1177/1045389X11421814
  32. Sherpa, R., Fils, P. and Jang, S. (2021), "Crack detection of a reinforced concrete wall using low cost RFIDbased sensors", 2021 Transportation Research Board Annual Meeting, 1298 - Non-destructive Testing and Evaluation of Bridges, Washington DC, USA, January.
  33. Sohn, H., Worden, K. and Farrar, C.R. (2002), "Statistical damage classification under changing environmental and operational conditions", J. Intell. Mater. Syst. Struct., 13(9), 561-574. https://doi.org/10.1106/104538902030904
  34. Sun, F.P., Liang, C. and Rogers, C.A. (1994), "Structural modal analysis using collocated piezoelectric actuator/sensors: an electromechanical approach", In: Smart Structures and Materials 1994: Smart Structures and Intelligent Systems, Vol. 2190, pp. 238-249. https://doi.org/10.1117/12.175186
  35. Unistress (1998), Unistress University of Connecticut Garage, Storrs, CT, USA. https://www.unistresscorp.com/portfolio/uconn/
  36. Vitols Associates (2020), O&G; Torrington, CT, USA. https://www.ogind.com/portfolio/uconn-north-campus-parking-garage
  37. Xia, Z.H. and Curtin, W.A. (2007), "Modeling of mechanical damage detection in CFRPs via electrical resistance", Compos. Sci. Technol., 67(7-8), 1518-1529. https://doi.org/10.1016/j.compscitech.2006.07.017
  38. Xu, Y., Dong, L., Wang, H., Di, Y., Xie, X., Wang, P. and Zhang, M. (2019), "Reducing disturbance of crack location on crack depth-sensing tag", Sensor Review, 39(4), 449-455. https://doi.org/10.1108/sr-11-2018-0284
  39. Xu, Y., Dong, L., Wang, H., Xie, X. and Wang, P. (2020), "Surface crack detection and monitoring in metal structure using RFID tag", Sensor Review, 40(1), 81-88. https://doi.org/10.1108/sr-06-2019-0153
  40. Zagrai, A.N. and Giurgiutiu, V. (2001), "Electro-Mechanical impedance method for crack detection in thin wall structures", In: The 3rd International Workshop on Structural Health Monitoring, Stanford University, CA, USA, September, pp. 77-86.