Structural Monitoring and Maintenance

  • 제8권3호
  • /
  • Pages.279-294
  • /
  • 2021
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Monitoring the required energy for the crack propagation of fiber-reinforced cementitious composite

  • Mirzamohammadi, Sajjad (Department of structural Engineering, Tarbiat Modares University) ;
  • Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
  • 투고 : 2021.07.30
  • 심사 : 2021.09.01
  • 발행 : 2021.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the results of experimental work on the required energy for the crack propagation (fracture energy), rupture modulus and compressive strength of fiber-reinforced cementitious composite (FRCC) with different types of fibers after exposure to 20℃, 100℃ and 300℃ are investigated. The experimental part of the work is divided into the following stages: the effects of sub-elevated temperatures and fiber types on the fracture and mechanical behaviors of FRCC; finding a relation between the fracture energy and mechanical properties of the specimens based on I-optimal design of response surface methodology (RSM-I-optimal). Specifically, the analysis of variance (ANOVA) was examined to evaluate the influences of compressive strength and rupture modulus on the required energy for the crack propagation. For this purpose, three monotype fiber reinforced mixes have been prepared. The utilized fibers were aramid, basalt and glass. Additionally, the predictive efficiency of the RSM model was studied based on the normalized goodness-of-fit statistics (Nash & Sutcliffe coefficient of efficiency, NSE). The main finding was that both compressive strength and rupture modulus had considerable influences on the fracture energy. However, the effect of rupture modulus was far greater than compressive strength. In terms of NSE value, the model predictive efficiency was good for fracture energy.

키워드

참고문헌

  1. Afzali-Naniz, O. and Mazloom, M. (2018), "Effects of colloidal nano-silica on fresh and hardened properties of self-compacting lightweight concrete", J. Build. Eng., 20, 400-410. https://doi.org/10.1016/j.jobe.2018.08.014
  2. Afzali-Naniz, O. and Mazloom, M. (2019a), "Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design", Asian J. Civil Eng., 20, 57-70. https://doi.org/10.1007/s42107-018-0088-2
  3. Afzali-Naniz, O. and Mazloom, M. (2019b), "Fracture behavior of self-compacting semi-lightweight concrete containing nano-silica", Adv. Struct. Eng., 22(10), 2264-2277. https://doi:10.1177/1369433219837426
  4. Al-alaily, H.S. and Hassan, A.A. (2016), "Refined statistical modeling for chloride permeability and strength of concrete containing metakaolin", Constr. Build. Mater., 114, 564-579. https://doi.org/10.1016/j.conbuildmat.2016.03.187
  5. Alsanusi, S. and Bentaher, L. (2015), "Prediction of compressive strength of concrete from early age test result using design of experiments (RSM)", Int. J. Civil Environ. Struct. Constr. Archit. Eng., 9(12), 1559-1563.
  6. ASTM C1609/M-05 (2006), Standard Test Method for Flexural Performance of Fiber Reinforced Concrete (using Beam with Third-point loading), ASTM International, West Conshohocken, PA, USA.
  7. Awolusi, T.F., Oke, O.L., Akinkurolere, O.O. and Sojobi, A.O. (2019), "Application of response surface methodology: Predicting and optimizing the properties of concrete containing steel fiber extracted from waste tires with limestone powder as filler", Case Studies Constr. Mater., 10, e00212. https://doi.org/10.1016/j.cscm.2018.e00212
  8. BSI 1881: part 111. (1983), Method of testing concrete, British Standards.
  9. Dias, W.P.S., Khoury, G.A, and Sullivan, P.J.E. (1990), "Mechanical properties of hardened cement paste exposed to temperatures up to 700℃ (1292°F)", ACI Mater., 87, 160-166.
  10. Hillerborg, A. (1985), "The theoretical basis of a method to determine the fracture energy GF of concrete", Mater. Struct., 18(4), 291-296. https://doi.org/10.1007/BF02472919
  11. Jimma, B.E. and Rangaraju, P.R. (2015), "Chemical admixtures dose optimization in pervious concrete paste selection-A statistical approach", Constr. Build. Mater., 101, 1047-1058. https://doi.org/10.1016/j.conbuildmat.2015.10.003
  12. Karamloo, M. and Mazloom, M. (2018), "An efficient algorithm for scaling problem of notched beam specimens with various notch to depth ratios", Comput. Concrete, Int. J., 22(1), 39-51. http://dx.doi.org/10.12989/cac.2018.22.1.039
  13. Karamloo, M., Mazloom, M. and Payganeh, G. (2016), "Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete", Constr. Build. Mater., 123, 508-515. https://doi.org/10.1016/j.conbuildmat.2016.07.061
  14. Karamloo, M., Mazloom, M. and Payganeh, G. (2017), "Effect of size on nominal strength of self-compacting lightweight concrete and self-compacting normal weight concrete: A stress-based approach", Mater. Today Commun, 13, 36-45. https://doi.org/10.1016/j.mtcomm.2017.08.002
  15. Khoury, G.A. (1992), "Compressive strength of concrete at high temperatures: a reassessment", Mag. Concrete Res., 161, 291-309. https://doi.org/10.1680/macr.1992.44.161.291
  16. Li, V.C. (2008), "Durability of mechanically loaded engineered cementitious composites under highly alkaline environments", 30, 72-81. https://doi.org/10.1016/j.cemconcomp.2007.09.004
  17. Mazloom, M. (2008), "Estimating long-term creep and shrinkage of high-strength concrete", Cem. Concrete Compos., 30(4), 316-326. https://doi.org/10.1016/j.cemconcomp.2007.09.006
  18. Mazloom, M. and Miri, M.S. (2017), "Interaction of magnetic water, silica fume and superplasticizer on fresh and hardened properties of concrete", Adv. Concrete Constr., Int. J., 5(2), 87-99. https://doi.org/10.12989/acc.2017.5.2.087
  19. Mazloom, M. and Mirzamohammadi, S. (2019), "Thermal effects on the mechanical properties of cement mortars reinforced with aramid, glass, basalt and polypropylene fibers", Adv. Mater. Res., Int. J., 8(2), 137-154. http://dx.doi.org/10.12989/amr.2019.8.2.137
  20. Mazloom, M. and Mirzamohammadi, S. (2021a), "Fracture of fibre-reinforced cementitious composites after exposure to elevated temperatures", Mag. Concrete Res., 73(14), 701-713. https://doi.org/10.1680/jmacr.19.00401
  21. Mazloom, M. and Mirzamohammadi, S. (2021b), "Computing the fracture energy of fiber reinforced cementitious composites using response surface methodology", Adv. Comput. Des., Int. J., 6(3), 225-239. http://dx.doi.org/10.12989/acd.2021.6.3.225
  22. Mazloom, M. and Ranjbar, A. (2010), "Relation between the workability and strength of self-compacting concrete", Proceedings of the 35th Conference on Our World in Concrete & Structures, Singapore, pp. 315-322.
  23. Mazloom, M. and Yoosefi, M.M. (2013), "Predicting the Indirect Tensile Strength of Self Compacting Concrete Using Artificial Neural Networks", Comput. Concrete, Int. J., 12(3), 285-301. https://doi.org/10.12989/cac.2013.12.3.285
  24. Mazloom, M., Allahabadi, A. and Karamloo, M. (2017), "Effect of silica fume and polyepoxide-based polymer on electrical resistivity", Adv. Concrete Constr., Int. J., 5(6), 587-611. https://doi.org/10.12989/acc.2017.5.6.587
  25. Mazloom, M., Homayooni, S.M. and Miri, S.M. (2018a), "Effect of rock flour type on rheology and strength of self-compacting lightweight concrete", Comput. Concrete, Int. J., 21(2), 199-207. https://doi.org/10.12989/cac.2018.21.2.199
  26. Mazloom, M., Soltani, A., Karamloo, M., Hasanloo, A. and Ranjbar, A. (2018b), "Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete", Adv. Mater. Res., Int. J., 7(1), 407-434. https://doi.org/10.12989/amr.2018.7.1.045
  27. Mazloom, M., Pourhaji, P., Shahveisi, M. and Jafari, S.H. (2019), "Studying the Park-Ang damage index of reinforced concrete structures based on equivalent sinusoidal waves", Struct. Eng. Mech., Int. J., 72(1), 845-859. https://doi.org/10.12989/sem.2019.72.1.083
  28. Mo, K.H., Loh, Z.P. and Tan, C.G., Alengaram, U.J. and Yap, S.P. (2018), "Behavior of fiber-reinforced cementitious composite containing high-volume fly ash at elevated temperatures", Sadha, 43(11), 1-8. https://doi.org/10.1007/s12046-018-0937-4
  29. Mohammed, B.S., Khed, V.C. and Nuruddin, M.F. (2018), "Rubbercrete mixture optimization using response surface methodology", J. Cleaner Prod., 171, 1605-1621. https://doi.org/10.1016/j.jclepro.2017.10.102
  30. Morsy, M.S., Abbas, H. and Alsayed, S.H. (2012), "Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures", Constr. Build. Mater., 35, 900-905. https://doi.org/10.1016/j.conbuildmat.2012.04.099
  31. Murray, C.A., Snyder, K.S. and Marion, B.A. (2014), "Characterization of permeable pavement materials based on recycled rubber and chitosan", Constr. Build. Mater., 69, 221-231. https://doi.org/10.1016/j.conbuildmat.2014.07.047
  32. Nikbin, I.M., Davoodi, M.R., Fallahnejad, H. and Rahimi, S. (2016), "Influence of mineral powder content on the fracture behaviors and ductility of self-compacting concrete", J. Mater. Civil Eng., 28(3), 04015417. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001404
  33. Rezaifar, O., Hasanzadeh, M. and Gholhaki, M. (2016), "Concrete made with hybrid blends of crumb rubber and metakaolin: Optimization using Response Surface Method", Constr. Build. Mater., 123, 59-68. https://doi.org/10.1016/j.conbuildmat.2016.06.047
  34. Ritter, A. and Munoz-Carpena, R. (2013), "Performance evaluation of hydrological models: statistical significance for reducing subjectivity in goodness-of-fit assessments", J. Hydrol., 480, 33-45. https://doi.org/10.1016/j.jhydrol.2012.12.004
  35. Sahmaran, M. and Li, V.C. (2007), "De-icing salt scaling resistance of mechanically loaded engineered cementitious composites", Cement Concrete Res., 37, 1035-1046. https://doi.org/10.1016/j.cemconres.2007.04.001
  36. Sahmaran, M., Lachemi, M. and Li, V.C. (2010), "Assessing Mechanical Properties and Microstructure of Fire-Damaged Engineered Cementitious Composites", ACI Mater., 107(3), 297-304. https://doi.org/10.14359/51663759
  37. Sahmaran, M., Ozbay, E., Yucel, H.E., Lachemi, M. and Li, V.C. (2011), "Effect of fly ash and PVA fiber on microstructural damage and residual properties of engineered cementitious composites exposed to high temperatures", J. Mater. Civil Eng., 23, 1735-1745. https://doi/10.1061/%28ASCE%29MT.1943-5533.0000335
  38. Salehi, H. and Mazloom, M. (2018), "Effect of magnetic-field intensity on fracture behaviors of self-compacting lightweight concrete", Mag. Concrete Res., 71(13), 665-679. https://doi.org/10.1680/jmacr.17.00418
  39. Salehi, H. and Mazloom, M. (2019a), "Opposite effects of ground granulated blast-furnace slag and silica fume on the fracture behavior of self-compacting lightweight concrete", Constr. Build. Mater., 222, 622-632. https://doi.org/10.1016/j.conbuildmat.2019.06.183
  40. Salehi, H. and Mazloom, M. (2019b), "An experimental investigation on fracture parameters and brittleness of self-compacting lightweight concrete containing magnetic field treated water", Arch. Civil Mech. Eng., 19, 803-819. https://doi.org/10.1016/j.acme.2018.10.008
  41. Simsek, B., Uygunoglub, T., Korucua, H.M. and Kocakerim, M.M. (2018), "Analysis of the effects of dioctyl terephthalate obtained from polyethylene terephthalate wastes on concrete mortar: A response surface methodology-based desirability function approach application", J. Cleaner Prod., 170, 437-445. https://doi.org/10.1016/j.jclepro.2017.09.176
  42. Tyagi, M., Rana, A., Kumari, S. and Jagadevan, S. (2018), "Adsorptive removal of cyanide from coke oven wastewater onto zero-valent iron: Optimization through response surface methodology, isotherm and kinetic studies", J. Cleaner Prod., 178, 398-407. https://doi.org/10.1016/j.jclepro.2018.01.016
  43. Wang, Y.C., Zhang, B.J and Hao, S.W. (2016), "Time - dependent brittle creep-relaxation failure in concrete", Mag. Concrete Res., 68(13), 692-700. https://doi.org/10.1680/jmacr.15.00186
  44. Yang, E. and Li, V.C. (2010), "Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model", Constr. Build. Mater., 24, 130-139. https://doi.org/10.1016/j.conbuildmat.2007.05.014
  45. Yu, J., Weng, W. and Yu, K. (2014), "Effect of different cooling regimes on the mechanical properties of cementitious composites subjected to high temperatures". https://doi.org/10.1155/2014/289213
  46. Yu, J., Lin, J., Zhang, Z. and Li, V.C. (2015), "Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures", Constr. Build. Mater., 99, 82-89. https://doi.org/10.1016/j.conbuildmat.2015.09.002
  47. Zhang, Y., Liu, Z. and Yao, L. (2019), "Mechanical properties of high-ductility cementitious composites with methyl silicone oil", Mag. Concrete Res., 72(14), 747-756. https://doi.org/10.1680/jmacr.18.00192