공업화학 (Applied Chemistry for Engineering)

  • 제32권5호
  • /
  • Pages.562-568
  • /
  • 2021
  • /
  • 1225-0112(pISSN)
  • /
  • 2288-4505(eISSN)
한국공업화학회 (The Korean Society of Industrial and Engineering Chemistry)
권호 표지
DOI QR코드

DOI QR Code

밀배아유 원료 O/W 유화액의 제조 및 안정성평가: CCD-RSM을 이용한 최적화

Emulsification and Stability of Wheat Germ Oil in Water Emulsions: Optimization using CCD-RSM

  • Hong, Seheum (Department of Polymer Science and Engineering, Dankook University) ;
  • Jang, Hyun Sik (Department of Chemical Engineering, Dankook University) ;
  • Lee, Seung Bum (Department of Chemical Engineering, Dankook University)
  • 투고 : 2021.07.29
  • 심사 : 2021.09.17
  • 발행 : 2021.10.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

천연 밀배아유와 복합 sugar ester를 이용하여 밀배아유 원료 O/W (oil in water) 유화액을 제조하였다. HLB 값, 유화제의 첨가량 및 유화시간이 O/W wheat germ oil 유화액의 평균 입자크기, 유화점도 및 ESI에 미치는 영향을 조사하였으며, 반응표면분석방법인 중심합성계획모델에 의해 제조된 유화과정의 파라미터를 모의하고 최적화하였다. O/W wheat germ oil 유화액의 제조를 위한 최적의 공정조건은 HLB 값(hydrophile-lipophile balance value)은 8.4, 유화제의 첨가량은 6.4 wt%, 유화시간은 25.4 min이며, 최적조건에서 중심합성계획(central composite design, CCD-RSM) 모델을 통한 예측 반응치는 7일 후의 유화액을 기준으로 MDS (mean droplet size)= 206 nm, 점도 = 8125 cP, ESI 98.2%이었다. 또한 실제 실험을 통해 얻어진 유화액의 MDS, 점도 및 ESI는 각각 209 nm, 7974 cP 및 98.7%로 나타났다. 따라서 중심합성계획 모델을 통해 밀배아유 원료 유화액의 안정성을 평가하는 최적화 과정을 설계할 수 있었다.

An O/W (oil in water) emulsion, wheat germ oil raw material, was produced by using natural wheat germ oil and composite sugar-ester. The effects of variables such as the hydrophile-lipophile balance (HLB) value, added emulsifier amount, and emulsification time on the average particle size, emulsification viscosity and ESI of O/W wheat germ oil emulsion were investigated. The parameters of the emulsification process produced by the central composite design model of the response surface methodology (CCD-RSM), which is a reaction surface analysis method, were simulated and optimized. The optimum process conditions obtained from this paper for the production of O/W wheat germ oil emulsion were 8.4, 6.4 wt%, 25.4 min for the HLB value, amount of emulsifier, and emulsion time, respectively. The predicted reaction values by CCD-RSM model under the optimum conditions were 206 nm, 8125 cP, and 98.2% for mean droplet size (MDS), viscosity, and ESI, respectively, based on the emulsion after 7 days. The MDS, viscosity and ESI of the emulsion obtained from actual experiments were 209 nm, 7974 cP and 98.7%, respectively. Therefore, it was possible to design an optimization process for evaluating the stability of the emulsion of wheat germ oil raw material by CCD-RSM.

키워드

참고문헌

  1. M. M. Anwar and N. E. Mohamed, Amelioration of liver and kidney functions disorders induced by sodium nitrate in rats using wheat germ oil, J. Radiat. Res. Appl. Sci., 8, 77-83 (2015). https://doi.org/10.1016/j.jrras.2014.11.004
  2. Z. P. Gumus, E. Guler, B. Demir, F. B. Barlas, M. Yavuzc, D. Colpankanb, A. M. Senisik, S. Teksoz, P. Unake, H. Coskunol, and S. Timur, Herbal infusions of black seed and wheat germ oil: Their chemical profiles, in vitro bio-investigations and effective formulations as phyto-nanoemulsions, Colloids Surf., B, 133, 73-80 (2015). https://doi.org/10.1016/j.colsurfb.2015.05.044
  3. S. Angela and S. R. Piroska, Sucrose esters as natural surfactants in drug delivery systems-A mini-review, Int. J. Pharm., 433, 1-9 (2012). https://doi.org/10.1016/j.ijpharm.2012.04.076
  4. W. C. Griffin, Classification of surface-active agents by "HLB", J. Soc. Cosmet. Chem., 1, 311-326 (1949)
  5. A. Kabalnov, Thermodynamic and theoretical aspects of emulsions and their stability, Curr. Opin. Colloid Interface Sci., 3(3), 270-275 (1998). https://doi.org/10.1016/S1359-0294(98)80071-X
  6. S. W. Han, H. Y. Song, T. W. Moon, and S. J. Choi, Influence of emulsion interfacial membrane characteristics on Ostwald ripening in a model emulsion, Food Chem., 242, 91-97 (2018). https://doi.org/10.1016/j.foodchem.2017.09.018
  7. S. Dashamiri, M. Ghaedi, A. Asfaram, F. Zare, and S. Wang, Multi-response optimization of ultrasound assisted competitive adsorption of dyes onto Cu(OH)2-nanoparticle loaded activated carbon: Central composite design, Ultrason. Sonochem., 34, 343-353 (2017). https://doi.org/10.1016/j.ultsonch.2016.06.007
  8. S. B. Lee, C. Zuo, Y. Xu, and I. K. Hong, Emulsification of natural sunscreen with green tea extract: optimization using CCD-RSM, App. Chem. Eng., 31(5), 532-538 (2020). https://doi.org/10.14478/ACE.2020.1067
  9. F. Tu, B. J. Park, and D. Lee, Thermodynamically stable emulsions using janus dumbbells as colloid surfactants, Langmuir, 29(41), 12679-12687 (2013). https://doi.org/10.1021/la402897d
  10. M. Fan, C. Nie, H. Du, J. Ni, B. Wang, and X. Wang, An insight into the solar emulsification of highly emulsified water produced from oilfields by monitoring the viscosity, zeta potential, particle size and rheology, Colloids Surf., A, 575, 144-154 (2019). https://doi.org/10.1016/j.colsurfa.2019.05.012
  11. I. M. Klink, R. J. Phillips, and S. R. Dungan, Effect of emulsion drop-size distribution upon coalescence in simple shear flow: A population balance study, J. Colloid Interface Sci., 353, 467-475 (2011). https://doi.org/10.1016/j.jcis.2010.09.059
  12. V. Castel, A. C. Rubiolo, and C. R. Carrara, Droplet size distribution, rheological behavior and stability of corn oil emulsions stabilized by a novel hydrocolloid (Brea gum) compared with gum arabic, Food Hydrocolloids, 63, 170-177 (2017). https://doi.org/10.1016/j.foodhyd.2016.08.039