Advances in Computational Design

  • 제6권4호
  • /
  • Pages.329-338
  • /
  • 2021
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The damped vibration of the annular and rectangular graded beams in the presence of the attached lumped mass

  • Heydari, Abbas (Department of Civil Engineering, Technical and Vocational University (TVU))
  • 투고 : 2021.07.08
  • 심사 : 2021.09.19
  • 발행 : 2021.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

In earthquake engineering, vibration control is a set of engineering tools aimed at mitigating seismic effects on structural members. Once the seismic waves have penetrated a building, there are a number of ways to control them to mitigate their damaging effects and improve the seismic performance of the building. Dissipate the wave energy inside the structure with properly designed dampers, distributing the wave energy over a wider frequency range and absorbing the resonant portions of the entire wave frequency band using what are known as mass dampers. The effect of mass attenuator on the reduction of fundamental frequency of beams made of functionally graded material (FGM) with annular and rectangular cross sections is studied. Mori-Tanaka homogenization scheme, conventional mixing rule and power law functions are used to model the material gradation. Various classical boundary conditions as well as shear hinge natural condition are considered. The lumped mass attenuator is connected to the beam at an arbitrary position without sliding. The total potential energy is minimized by using the spectral Ritz method to calculate the fundamental frequency and the corresponding mode shape. A reduction in the frequencies is observed in the presence of the attached lumped mass attenuator. The dimensionless frequency reduction is affected by the amount and position of the lumped mass. The position of the lumped mass attenuator plays an important role in vibration control of the beam.

키워드

참고문헌

  1. Akbulut, M., Sarac, A. and Ertas, H.A., (2020), "An investigation of non-linear optimization methods on composite structures under vibration and buckling loads", Advan. Comput. Des., 5(3), 209-231. http://dx.doi.org/10.12989/acd.2020.5.3.209.
  2. Bajer, C., Pisarski, D., Szmidt, T. and Dyniewicz B., (2017), "Intelligent damping layer under a plate subjected to a pair of masses moving in opposite directions", J. Sound Vib., 394(28), 333-347. https://doi.org/10.1016/j.jsv.2017.01.046.
  3. Cao, Y., Cao, D., He, G., Ge, X. and Hao, Y. (2021), "Vibration analysis and distributed piezoelectric energy harvester design for the L-shaped beam", Europ. J. Mech. - A/Solids, 87, 104214. https://doi.org/10.1016/j.euromechsol.2021.104214.
  4. Fang, Y., Lia, L., Zhang, D., Chen, S. and Liao, W. (2021), "Vibration suppression of a rotating functionally graded beam with enhanced active constrained layer damping treatment in temperature field", Thin-Wall. Struct. 161, 107522. https://doi.org/10.1016/j.tws.2021.107522.
  5. Hashemnia, K. (2021), "Effect of particle size and media volume fraction on the vibration attenuation of a thin-walled beam containing granular media", Soil Dyn. Earthq. Eng. 147, 106816. https://doi.org/10.1016/j.soildyn.2021.106816.
  6. Heydari, A. (2013), "Analytical solutions for buckling of functionally graded circular plates under uniform radial compression using Bessel function", Int. J. Advan. Des. Manufact. Technol., 6, 4, 41-47.
  7. Heydari, A. (2015), "Spreading of plastic zones in functionally graded spherical tanks subjected to internal pressure and temperature gradient combinations", Iran. J. Mech. Eng., 16(2), 5-25.
  8. Heydari, A. (2018), "Exact vibration and buckling analyses of arbitrary gradation of nano-higher order rectangular beam", Steel Compos. Struct., 28(5), 589-606. https://doi.org/10.12989/scs.2018.28.5.589.
  9. Heydari, A. (2018), "Size-dependent damped vibration and buckling analyses of bidirectional functionally graded solid circular nano-plate with arbitrary thickness variation", Struct. Eng. Mech. 68(2), 171-182. http://dx.doi.org/10.12989/sem.2018.68.2.171.
  10. Heydari, A. (2020), "Buckling analysis of discontinues fractional axially graded thin beam with piecewise axial load function rested on rotational spring hinges", Int. J. Advan. Des. Manufact. Technol., 13(2), 99-108.
  11. Heydari, A. and Jalali, A. (2017), "A new scheme for buckling analysis of bidirectional functionally graded Euler beam having arbitrary thickness variation rested on Hetenyi elastic foundation", Modares Mech. Eng., 17, 1, 47-55.
  12. Heydari, A. and Li, L. (2021), "Dependency of critical damping on various parameters of tapered bidirectional graded circular plates rested on Hetenyi medium", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(12), 2157-2179. https://doi.org/10.1177/0954406220952498.
  13. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. http://dx.doi.org/10.12989/sem.2018.66.6.737.
  14. Heydari, A., Jalali, A. and Nemati, A. (2017), "Buckling analysis of circular functionally graded plate under uniform radial compression including shear deformation with linear and quadratic thickness variation on the Pasternak elastic foundation", Appl. Mathem. Modelling, 41, 494-507. https://doi.org/10.1016/j.apm.2016.09.012.
  15. Kiani Y., Dimitri R. and Tornabene F. (2018), "Free vibration of FG-CNT reinforced composite skew cylindrical shells using the Chebyshev-Ritz formulation", Compos. Part B: Eng., 147, 169-177. https://doi.org/10.1016/j.compositesb.2018.04.028.
  16. Lazaro M. (2018), "Eigensolutions of nonviscously damped systems based on the fixed-point iteration", J. Sound Vib., 418, 100-121. https://doi.org/10.1016/j.jsv.2017.12.025.
  17. Lu, L., She, G.L. and Guo, X. (2021), "Size-dependent postbuckling analysis of graphene reinforced composite microtubes with geometrical imperfection", Int. J. Mech. Sci., 199, 106428. https://doi.org/10.1016/j.ijmecsci.2021.106428.
  18. Rani R. and Lal R. (2019), "Free vibrations of composite sandwich plates by Chebyshev collocation technique", Compos. Part B: Eng., 165, 442-455. https://doi.org/10.1016/j.compositesb.2019.01.088.
  19. She, G.L., Liu, H.B. and Karami, B. (2021), "Resonance analysis of composite curved microbeams reinforced with graphene nanoplatelets", Thin-Wall. Struct., 160, 107407. https://doi.org/10.1016/j.tws.2020.107407.
  20. Xu, J., Yang, Z., Yang, J. and Li, Y. (2021), "Influence of the boundary relaxation on the free vibration of rotating composite laminated Timoshenko beams", Compos. Struct., 266, 113690. https://doi.org/10.1016/j.compstruct.2021.113690.
  21. Yang Y., Jezequel L., Dessombz O., Bristiel P. and Sauvage O. (2019), "Modelization of boundary friction damping induced by second-order bending strain", J. Sound Vib., 446, 113-128. https://doi.org/10.1016/j.jsv.2019.01.033.
  22. Zhang, Y.Y., Wang, X.Y., Zhang, X., Shen, H.M. and She, G.L. (2021), "On snap-buckling of FG-CNTR curved nanobeams considering surface effects", Steel Compos. Struct., 38(3), 293-304. https://doi.org/10.12989/scs.2021.38.3.293.
  23. Zuo, L. and Qian, F., (2021), "Tuned nonlinear spring-inerter-damper vibration absorber for beam vibration reduction based on the exact nonlinear dynamics model", J. Sound Vib., 509. https://doi.org/10.1016/j.jsv.2021.116246.