Advances in Computational Design

  • 제6권4호
  • /
  • Pages.339-360
  • /
  • 2021
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Computer-based design optimization of post-tensioned anchor for single-strand

  • Cho, Ah Sir (Department of Architecture, Dongyang Mirae University) ;
  • Kang, Thomas H.K. (Department of Architecture & Architectural Engineering and Engineering Research Institute, Seoul National University)
  • 투고 : 2021.09.17
  • 심사 : 2021.10.20
  • 발행 : 2021.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

In Korea, a 15.2-mm diameter strand is preferred for a post-tensioning (PT) method to reduce the total tendon and anchor number. However, the anchor for the Ø15.2-mm strand is large and sometimes inefficient while the anchor using the Ø12.7 mm single-strand is common in the United States. This study developed a post-tensioned anchor for Ø15.2-mm unbonded single-strand tendons to address the existing trend in domestic PT construction. The shape of the anchor is optimized to minimize the von Mises stress through a finite element analysis by varying the shape of the tubular body, bearing plate, and gussets. In addition, the design is also determined in consideration of a jacking device, accessories, and workability. ACI 423.7-14, on the other hand, requires the use of an encapsulation system, which is highly resistant to corrosion, for elevated floors. Therefore, the encapsulated anchor was also developed to enhance the durability of PT tendons and buildings.

키워드

과제정보

This work was supported by the Samsung C&T, National Research Foundation of Korea (grant number NRF-2018R1D1A1B06044752), and Institute of Construction and Environmental Engineering at Seoul National University, as well as Dongyang Mirae University.

참고문헌

  1. ACI 318 (2019), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, MI, U.S.A.
  2. ACI 350 (2006), Code Requirements for Environmental Engineering Concrete Structures and Commentary, American Concrete Institute, Farmington Hills, MI, U.S.A.
  3. ACI 423.7 (2014), Specification for Unbonded Single-Strand Tendon Materials, American Concrete Institute, Farmington Hills, MI, U.S.A.
  4. Cho, A.S. (2021), Development and Performance Verification of Post-Tensioned Anchor for Unbonded Single-Strand Tendon, Ph.D. Dissertation, Seoul National University, Seoul, Republic of Korea.
  5. Cho, A.S., Jo, Y.W., Jeon, B.K. and Kang, T.H.-K. (2015), "Development and performance test for unbonded post-tensioned anchor", J. Korea Concrete Institute, 27(1), 11-20. https://doi.org/10.4334/JKCI.2015.27.1.011.
  6. Cho, A.S. and Kang, T.H.-K. (2018), "Load-carrying performance and hydrostatic tests of encapsulated anchor systems for unbonded post-tensioning single-strands", Int. J. Concrete Struct. Mater., 12. https://doi.org/10.1186/s40069-018-0233-z.
  7. Choi, S.-H., Hwang, J.-H., Han, S.-J., Joo, H.-E. and Kim, K.S. (2021), "Experimental study of punching shear in post-tensioned slabs with unbonded tendons", Struct. Eng. Mech., 79(4), 507-516. https://doi.org/10.12989/sem.2021.79.4.507.
  8. Han, S.W., Kee, S.-H., Park, Y.-M., Lee, L.-H. and Kang, T.H.-K. (2006), "Hysteretic behavior of exterior post-tensioned flat plate connections", Eng. Struct., 28(14), 1983-1996. https://doi.org/10.1016/j.engstruct.2006.03.029.
  9. Ibrahim Ary, M. and Kang, T.H.-K. (2012), "Shear-strengthening of reinforced & prestressed concrete beams using FRP: part I - review of previous research", Int. J. Concrete Struct. Mater., 6, 41-47. https://doi.org/10.1007/s40069-012-0004-1.
  10. Leonhardt, F. (1964), Prestressed Concrete; Design and Construction, (2nd Edition), W. Ernst.
  11. Kang, T.H.-K. and Ibrahim Ary, M. (2012), "Shear-strengthening of reinforced & prestressed concrete beams using FRP: part II - experimental investigation", Int. J. Concrete Struct. Mater., 6, 49-57. https://doi.org/10.1007/s40069-012-0005-0.
  12. Kang, T.H.-K. and Wallace, J.W. (2008), "Seismic performance of reinforced concrete slab-column connections with thin plate stirrups", ACI Struct. J., 105(5), 617-625.
  13. KCI (2010), Standard Concrete Specification and Commentary, Korea Concrete Institute, Korea.
  14. Kim, J.-M., Lee, J. and Sohn, H. (2018), "Detection of tension force reduction in a post-tensioning tendon using pulsed-eddy-current measurement", Struct. Eng. Mech., 65(2), 129-139. http://dx.doi.org/10.12989/sem.2018.65.2.129.
  15. SPS-KFCA-D4302-5016 (2017), Spheroidal Graphite Iron Castings, Korea Foundry Cooperative Association. Korea.
  16. Twigden, K.M. and Henry, R.S. (2019), "Snap back testing of unbonded post-tensioned concrete wall systems", Earthq. Struct., 16(2), 209-219. https://doi.org/10.12989/eas.2019.16.2.209.
  17. Walsh, K.Q. and Kurama, Y.C. (2010), "Behavior of unbonded posttensioning monostrand anchorage systems under monotonic tensile loading", PCI J., 55(1), 97-117. https://doi.org/10.15554/pcij.01012010.97.117.
  18. Yim, H.J., Yang, J.M. and Kim, J.K. (2018), "Improved prestressed concrete girder with hybrid segments system", Struct. Eng. Mech., 65(2), 183-190. https://doi.org/10.12989/sem.2018.65.2.183.
  19. Zhang, Y., Xu, D. and Liu, C. (2018), "Behavior and stress check of concrete box girders strengthened by external prestressing", Comput. Concrete, 22(2), 133-142. https://doi.org/10.12989/cac.2018.22.2.133.