Earthquakes and Structures

  • 제21권4호
  • /
  • Pages.395-411
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Probabilistic assessment for spectrally matched real ground motion records on distinct soil profiles by simulation of SDOF systems

  • Demir, Ahmet (Department of Civil Engineering, Bolu Abant Izzet Baysal University) ;
  • Palanci, Mehmet (Department of Civil Engineering, Istanbul Arel University) ;
  • Kayhan, Ali Haydar (Department of Civil Engineering, Pamukkale University)
  • 투고 : 2020.12.31
  • 심사 : 2021.08.20
  • 발행 : 2021.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Selection of appropriate ground motion records for dynamic analysis has uttermost importance since it significantly affects structural responses which are used for seismic performance assessment of buildings. This study focuses on probabilistic assessment of several record selection strategies that apply different level of constraints for spectrally matched real ground motion records. For this purpose, single degree of freedom (SDOF) systems with various lateral strength capacity ratios, vibration periods and hysteretic models were considered to cover broad type of structural systems and maximum displacement demands of SDOF systems were obtained by nonlinear dynamic analyses. Using the analysis results, central tendency of maximum displacement demands was evaluated. Confidence intervals of the demands were also estimated in probabilistic manner. In addition, non-exceedance probability curves of the displacement demands were constructed. Results indicate that using supplementary constraints about spectral matching, it is possible to control the variation of spectral accelerations and hence the variation of seismic displacement demands. In conclusion, displacement demands can be obtained for code- or probability-based design/performance assessment with appropriate selection approach considering desired variation which can be determined from either probabilistic or deterministic seismic hazard analysis.

키워드

참고문헌

  1. Akkar, S., Azak, T., Can, T.O.L.G.A., Ceken, U., Tumsa, M.D., Duman, T.Y. and Zulfikar, O. (2018), "Evolution of seismic hazard maps in Turke", Bull. Earthq. Eng., 16(8), 3197-3228. https://doi.org/10.1007/s10518-018-0349-1.
  2. Akkar, S., Sandikkaya, M.A., Senyurt, M., Sisi, A.A., Ay, B.O., Traversa, P., Douglas, J., Cotton, F., Luzi, L., Hernandez, B. and Godey, S. (2014), "Reference database for seismic ground-motion in Europe (RESORCE)", Bull. Earthq. Eng., 12(1), 311-339. https://doi.org/10.1007/s10518-013-9506-8.
  3. Akkar, S., Sucuoglu, H. and Yakut, A. (2005), "Displacement-based fragility functions for low- and mid-rise ordinary concrete buildings", Earthq. Spectra, 21(4), 901-927. http://dx.doi.org/10.1193/1.2084232.
  4. Ambraseys, N.N., Douglas, J., Rinaldis, D., Berge-Thierry, C., Suhadolc, P., Costa, G. and Smit, P. (2004), Dissemination of European Strong-Motion Data, Engineering and Physical Sciences Research Council, Swindon, U.K.
  5. Ancheta, T.D., Darragh, R.B., Stewart, J.P., Seyhan, E., Silva, W.J., Chiou, B.S.J., Wooddell, K.E., Graves, R.B., Kottke, A.R., Boore, D.M., Kishida, T. and Donahue, J.L. (2014), "NGAWest2 database", Earthq. Spectra, 30(3), 989-1005. https://doi.org/10.1193/070913EQS197M.
  6. Araujo, M., Macedo, L., Marques, M. and Castro, J.M. (2016), "Code-based record selection methods for seismic performance assessment of buildings", Earthq. Eng. Struct. Dyn., 45(1), 129-148. https://doi.org/10.1002/eqe.2620.
  7. ASCE 07-16 (2017), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers; Reston, Virginia, U.S.A.
  8. ATC 40 (1996), Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council; California, U.S.A.
  9. Baigoly, M., Sharg, F.H. and Rofooei, F.R. (2020), "A new study in designing MTMDs in SDOF and MDOF systems based on the spectral analysis method", Earthq. Struct., 19(4), 243-259. https://doi.org/10.12989/eas.2020.19.4.243.
  10. Baker, J.W. (2011), "Conditional mean spectrum: tool for ground-motion selection", J. Struct. Eng., 137(3), 322-331. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000215.
  11. Baltzopoulos, G., Baraschino, R., Iervolino, I. and Vamvatsikos, D. (2018), "Dynamic analysis of single-degree-of-freedom systems (DYANAS): A graphical user interface for OpenSees", Eng. Struct., 177, 395-408. https://doi.org/10.1016/j.engstruct.2018.09.078.
  12. Bommer, J.J. and Acevedo, A.B. (2004), "The use of real earthquake accelerograms as input to dynamic analysis", J. Earthq. Eng., 8(1), 43-91. https://doi.org/10.1080/13632460409350521.
  13. Demir, A., Palanci, M. and Kayhan, A.H. (2020), "Evaluation of supplementary constraints on dispersion of EDPs using real ground motion record dets", Arab. J. Sci. Eng., 45, 8379-8401. https://doi.org/10.1007/s13369-020-04719-9.
  14. Eurocode 8 (2004), Design Provisions for Earthquake Resistance of Structures. Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  15. FEMA 368 (2001), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, Federal Emergency Management Agency; Washington (DC), U.S.A.
  16. FEMA 440 (2005), Improvement of Nonlinear Static Seismic Procedures, Federal Emergency Management Agency, Washington (DC), USA.
  17. FEMA 450 (2003), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, Federal Emergency Management Agency, U.S.A.
  18. FEMA P58 (2018), "Seismic Performance Assessment of Buildings Volume 1-Methodology", Technical Report FEMAP58; Federal Emergency Management Agency, U.S.A.
  19. Gamst, G., Meyers, L.S. and Guarino, A.J. (2008), Analysis of Variance Designs - A Conceptual and Computational Approach with SPSS and SAS, Cambridge University Press, Cambridge.
  20. GB (2010), Code for Seismic Design of Buildings, China Architecture and Building Press; Beijing, China.
  21. Geem, Z.W., Kim, J.H. and Loganathan, G.V. (2001), "A new heuristic optimization algorithm: harmony search", Simulation, 76(2), 60-68. https://doi.org/10.1177/003754970107600201.
  22. Gorgulu, O. and Taskin, B. (2015), "Numerical simulation of RC infill walls under cyclic loading and calibration with widely used hysteretic models and experiments", Bull. Earthq. Eng., 13, 2591-2610. https://doi.org/10.1007/s10518-015-9739-9.
  23. Hachem, M.M. (2004), "BISPEC: Interactive software for the computation of unidirectional and bidirectional nonlinear earthquake spectra", Structures Congress 2004, Tennessee, USA, May. https://doi.org/10.1061/40700(2004)180.
  24. Hancock, J., Bommer, J.J. and Stafford, P.J. (2008), "Numbers of scaled and matched accelerograms required for inelastic dynamic analyses", Earthq. Eng. Struct. Dyn., 37(14), 1585-1607. https://doi.org/10.1002/eqe.827.
  25. Iervolino, I., Galasso, C. and Cosenza, E. (2010), "REXEL: computer aided record selection for code-based seismic structural analysis", Bull. Earthq. Eng., 8(2), 339-362. https://doi.org/10.1007/s10518-009-9146-1.
  26. Iervolino, I., Maddaloni, G. and Cosenza, E. (2008), "Eurocode 8 compliant real record sets for seismic analysis of structures", J. Earthq. Eng., 12(1), 54-90. https://doi.org/10.1080/13632460701457173.
  27. Karimzadeh, S., Kadas, K., Askan, A., Erberik, M.A. and Yakut, A. (2020), "Derivation of analytical fragility curves using SDOF models of masonry structures in Erzincan (Turkey)", Earthq. Struct., 18(2), 246-261. https://doi.org/10.12989/eas.2020.18.2.249.
  28. Katsanos, E.I. and Sextos, A.G. (2013), "ISSARS: An integrated software environment for structure-specific earthquake ground motion selection", Adv. Eng. Softw., 58, 70-85. https://doi.org/10.1016/j.advengsoft.2013.01.003.
  29. Katsanos, I.E., Sextos, G.A. and Manolis, D.G. (2010), "Selection of earthquake ground motion records: A State- of- the- art-review from a structural engineering perspective", Soil Dyn. Earthq. Eng., 30(4), 157-169. https://doi.org/10.1016/j.soildyn.2009.10.005.
  30. Kayhan, A.H. (2016), "Scaled and unscaled ground motion sets for uni-directional and bi-directional dynamic analysis", Earthq. Struct., 10(3), 563-588. https://doi.org/10.12989/eas.2016.10.3.563.
  31. Kayhan, A.H. and Demir, A. (2016), "Statistical evaluation of drift demands of RC frames using code-compatible real ground motion record sets", Struct. Eng. Mech., 60(6), 953-977. https://doi.org/10.12989/sem.2016.60.6.953.
  32. Kayhan, A.H., Demir, A. and Palanci, M. (2018), "Statistical evaluation of maximum displacement demands of SDOF systems by code-compatible nonlinear time history analysis", Soil Dyn. Earthq. Eng., 115, 513-530. https://doi.org/10.1016/j.soildyn.2018.09.008.
  33. Kayhan, A.H., Korkmaz, K.A. and Irfanoglu, A. (2011), "Selecting and scaling real ground motion records using harmony search algorithm", Soil Dyn. Earthq. Eng., 31(7), 941-953. https://doi.org/10.1016/j.soildyn.2011.02.009.
  34. Liossatou, E. and Fardis, M.N. (2015), "Residual displacements of RC structures as SDOF systems", Earthq. Eng. Struct. Dyn., 44(5), 713-734. https://doi.org/10.1002/eqe.2483.
  35. Macedo, L. and Castro, J.M. (2017), "SelEQ: an advanced ground motion record selection and scaling framework", Advan. Eng. Softw., 114, 32-42. https://doi.org/10.1016/j.advengsoft.2017.05.005.
  36. Mangalathu, S., Soleimani, F. and Jeon, J.S. (2017), "Bridge classes for regional seismic risk assessment: Improving HAZUS models", Eng. Struct., 148, 755-766. https://doi.org/10.1016/j.engstruct.2017.07.019.
  37. Mergos, E.P. and Sextos, A.G. (2019), "Selection of earthquake ground motions for multiple objectives using genetic algorithms", Eng. Struct., 187, 414-427. https://doi.org/10.1016/j.engstruct.2019.02.067.
  38. Naeim, F., Alimoradi, A. and Pezeshk, S. (2004), "Selection and scaling of ground motion time histories for structural design using genetic algorithm", Earthq. Spectra, 20(2), 413-426. https://doi.org/10.1193/1.1719028.
  39. Otani, S. (1981), "Hysteresis models of reinforce concrete for earthquake response analysis", J. Univ. Tokyo, 36(2), 407-441.
  40. Palanci, M., Kayhan, A.H. and Demir, A. (2018), "A statistical assessment on global drift ratio demands of mid-rise RC buildings using code-compatible real ground motion records", Bull. Earthq. Eng., 16(11), 5453-5488. htps://doi.org/10.1007/s10518-018-0384-y.
  41. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  42. Reyes, J.C. and Kalkan, E. (2012), "How many records should be used in an ASCE/SEI-7 ground motion scaling procedure?", Earthq. Spectra, 28(3), 1223-1242. https://doi.org/10.1193/1.4000066.
  43. Sextos, A.G., Katsanos, E.I. and Manolis, G.D. (2011), "EC8-based earthquake record selection procedure evaluation: validation study based on observed damage of an irregular R/C building", Soil Dyn. Earthq. Eng., 31(4), 583-597. https://doi.org/10.1016/j.soildyn.2010.10.009.
  44. Shome, N., Cornell, A.C., Bazzurro, P. and Carballo, J.E. (1998), "Earthquakes, records and nonlinear responses", Earthq. Spectra, 14(3), 469-500. https://doi.org/10.1193/1.1586011.
  45. Strukar, K., Sipos, T.K., Jelec, M. and Nyarko, M.H. (2019), "Efficient damage assessment for selected earthquake records based on spectral matching", Earthq. Struct., 17(3), 271-282. https://doi.org/10.12989/eas.2019.17.3.271.
  46. TBEC (2018), Turkish building earthquake code. Ministry of Public Works and Settlement, Ankara, Turkey.
  47. Ucar, T., Merter, O. and Duzgun, M. (2015), "Determination of lateral strength and ductility characteristics of existing mid-rise RC buildings in Turkey", Comput. Concrete, 16(3), 467-485. https://doi.org/10.12989/cac.2015.16.3.467.