Corrosion Science and Technology

  • 제20권5호
  • /
  • Pages.249-255
  • /
  • 2021
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of a Porous Copper Current Collector Using a Facile Chemical Etching to Alleviate Degradation of a Silicon-Dominant Li-ion Battery Anode

  • Choi, Hongsuk (School of Materials Science & Engineering, Gwangju Institute of Science and Technology (GIST)) ;
  • Kim, Subin (School of Materials Science & Engineering, Gwangju Institute of Science and Technology (GIST)) ;
  • Song, Hayong (School of Materials Science & Engineering, Gwangju Institute of Science and Technology (GIST)) ;
  • Suh, Seokho (Graduate School of Energy Convergence, Gwangju Institute of Science and Technology (GIST)) ;
  • Kim, Hyeong-Jin (Graduate School of Energy Convergence, Gwangju Institute of Science and Technology (GIST)) ;
  • Eom, KwangSup (School of Materials Science & Engineering, Gwangju Institute of Science and Technology (GIST))
  • 투고 : 2021.07.28
  • 심사 : 2021.10.13
  • 발행 : 2021.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this work, we proposed a facile method to fabricate the three-dimensional porous copper current collector (3D Cu CC) for a Si-dominant anode in a Li-ion battery (LiB). The 3D Cu CC was prepared by combining chemical etching and thermal reduction from a planar copper foil. It had a porous layer employing micro-sized Cu balls with a large surface area. In particular, it had strengthened attachment of Si-dominant active material on the CC compared to a planar 2D copper foil. Moreover, the increased contact area between a Si-dominant active material and the 3D Cu could minimize contact loss of active materials from a CC. As a result of a battery test, Si-dominant active materials on 3D Cu showed higher cyclic performance and rate-capability than those on a conventional planar copper foil. Specifically, the Si electrode employing 3D Cu exhibited an areal capacity of 0.9 mAh cm-2 at the 300th cycles (@ 1.0 mA cm-2), which was 5.6 times higher than that on the 2D copper foil (0.16 mAh cm-2).

키워드

과제정보

This work was supported by GIST Research Institute (GRI) grant funded by Gwangju Institute of Science and Technology (GIST) in 2021.

참고문헌

  1. U. Chang, J. T. Lee, J.-M. Yun, B. Lee, S. W. Lee, H.-I. Joh, K. Eom, and T. F. Fuller, In Situ Self-Formed Nanosheet Mos3/Reduced Graphene Oxide Material Showing Superior Performance as a Lithium-Ion Battery Cathode, ACS nano, 13, 1490 (2018). Doi: https://doi.org/10.1021/acsnano.8b07191
  2. G. Zubi, R. Dufo-Lopez, M. Carvalho, and G. Pasaoglu, The Lithium-Ion Battery: State of the Art and Future Perspectives, Renewable and Sustainable Energy Reviews, 89, 292 (2018). Doi: https://doi.org/10.1016/j.rser.2018.03.002
  3. K. Eom, J. T. Lee, M. Oschatz, F. Wu, S. Kaskel, G. Yushin, and T. F. Fuller, A Stable Lithiated Silicon-Chalcogen Battery Via Synergetic Chemical Coupling between Silicon and Selenium, Nature communications, 8, 13888 (2017). Doi: https://doi.org/10.1038/ncomms13888
  4. D. Deng, M. G. Kim, J. Y. Lee, and J. Cho, Green Energy Storage Materials: Nanostructured Tio 2 and Sn-Based Anodes for Lithium-Ion Batteries, Energy & Environmental Science, 2, 818 (2009). Doi: https://doi.org/10.1039/B823474D
  5. J.-M. Tarascon and M. Armand, Issues and Challenges Facing Rechargeable Lithium Batteries, Materials for sustainable energy: a collection of peer-reviewed research and review articles from Nature Publishing Group, (2011). Doi: https://doi.org/10.1142/9789814317665_0024
  6. S. Choi, T.-w. Kwon, A. Coskun, and J. W. Choi, Highly Elastic Binders Integrating Polyrotaxanes for Silicon Microparticle Anodes in Lithium Ion Batteries, Science, 357, 279 (2017). Doi: https://doi.org/ 10.1126/science.aal4373
  7. I. Kovalenko, B. Zdyrko, A. Magasinski, B. Hertzberg, Z. Milicev, R. Burtovyy, I. Luzinov, and G. Yushin, A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries, Science, 334, 75 (2011). Doi: https://doi.org/10.1126/science.1209150
  8. J. Shin and E. Cho, Agglomeration Mechanism and a Protective Role of Al2O3 for Prolonged Cycle Life of Si Anode in Lithium-Ion Batteries, Chemistry of Materials, 30, 3233 (2018). Doi: https://doi.org/10.1021/acs.chemmater.8b00145
  9. Y. Han, P. Qi, J. Zhou, X. Feng, S. Li, X. Fu, J. Zhao, D. Yu, and B. Wang, Metal-Organic Frameworks (Mofs) as Sandwich Coating Cushion for Silicon Anode in Lithium Ion Batteries, ACS applied materials & interfaces, 7, 26608 (2015). Doi: https://doi.org/10.1021/acsami.5b08109
  10. J. Liu, P. Kopold, P. A. van Aken, J. Maier, and Y. Yu, Energy Storage Materials from Nature through Nanotechnology: A Sustainable Route from Reed Plants to a Silicon Anode for Lithium-Ion Batteries, Angewandte Chemie, 127, 9632 (2015). Doi: https://doi.org/10.1002/ange.201503150
  11. H. Shang, Z. Zuo, L. Yu, F. Wang, F. He, and Y. Li, Low-Temperature Growth of All-Carbon Graphdiyne on a Silicon Anode for High-Performance Lithium-Ion Batteries, Advanced Materials, 30, 1801459 (2018). Doi: https://doi.org/10.1002/adma.201801459
  12. Y.-L. Kim, Y.-K. Sun, and S.-M. Lee, Enhanced Electrochemical Performance of Silicon-Based Anode Material by Using Current Collector with Modified Surface Morphology, Electrochimica Acta, 53, 4500 (2008). Doi: https://doi.org/10.1016/j.electacta.2008.01.050
  13. S.-H. Moon, S.-J. Kim, M.-C. Kim, J.-Y. So, J.-E. Lee, Y.-K. Shin, W.-G. Bae, and K.-W. Park, Stress-Relieved Si Anode on a Porous Cu Current Collector for High-Performance Lithium-Ion Batteries, Materials Chemistry and Physics, 223, 152 (2019). Doi: https://doi.org/10.1016/j.matchemphys.2018.10.042
  14. D. Ma, H. Zhou, J. Zhang, and Y. Qian, Controlled Synthesis and Possible Formation Mechanism of Leaf-Shaped Sns2 Nanocrystals, Materials Chemistry and Physics, 111, 391 (2008). Doi: https://doi.org/10.1016/j.matchemphys.2008.04.035
  15. X. Wen, W. Zhang, and S. Yang, Synthesis of Cu (Oh) 2 and Cuo Nanoribbon Arrays on a Copper Surface, Langmuir, 19, 5898 (2003). Doi: https://doi.org/10.1021/la0342870
  16. P. Xu, K. Ye, M. Du, J. Liu, K. Cheng, J. Yin, G. Wang, and D. Cao, One-Step Synthesis of Copper Compounds on Copper Foil and Their Supercapacitive Performance, Rsc Advances, 5, 36656 (2015). Doi: https://doi.org/10.1039/C5RA04889C
  17. C.-P. Yang, Y.-X. Yin, S.-F. Zhang, N.-W. Li, and Y.-G. Guo, Accommodating Lithium into 3d Current Collectors with a Submicron Skeleton Towards Long-Life Lithium Metal Anodes, Nature communications, 6, 1 (2015). Doi: https://doi.org/10.1038/ncomms9058
  18. J. A. Rodriguez, J. Y. Kim, J. C. Hanson, M. Perez, and A. I. Frenkel, Reduction of Cuo in H 2: In Situ TimeResolved Xrd Studies, Catalysis Letters, 85, 247 (2003). Doi: https://doi.org/10.1023/A:1022110200942
  19. K. Ogata, E. Salager, C. Kerr, A. Fraser, C. Ducati, A. J. Morris, S. Hofmann, and C. P. Grey, Revealing Lithium-Silicide Phase Transformations in Nano-Structured Silicon-Based Lithium Ion Batteries Via in Situ Nmr Spectroscopy, Nature communications, 5, 3217 (2014). Doi: https://doi.org/10.1038/ncomms4217
  20. J. Guo, A. Sun, X. Chen, C. Wang, and A. Manivannan, Cyclability Study of Silicon-Carbon Composite Anodes for Lithium-Ion Batteries Using Electrochemical Impedance Spectroscopy, Electrochimica Acta, 56, 3981 (2011). Doi: https://doi.org/10.1016/j.electacta.2011.02.014