Computers and Concrete

  • 제28권4호
  • /
  • Pages.347-360
  • /
  • 2021
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical investigation on RC T-beams strengthened in the negative moment region using NSM FRP rods at various depth of embedment

  • Haryanto, Yanuar (Department of Civil Engineering, College of Engineering, National Cheng Kung University) ;
  • Hu, Hsuan-Teh (Department of Civil Engineering, College of Engineering, National Cheng Kung University) ;
  • Han, Ay L. (Department of Civil Engineering, Faculty of Engineering, Universitas Diponegoro) ;
  • Hsiao, Fu-Pei (Department of Civil Engineering, College of Engineering, National Cheng Kung University) ;
  • Teng, Charng-Jen (Department of Civil Engineering, College of Engineering, National Cheng Kung University) ;
  • Hidayat, Banu A. (Department of Civil Engineering, College of Engineering, National Cheng Kung University) ;
  • Nugroho, Laurencius (Department of Civil Engineering, College of Engineering, National Cheng Kung University)
  • 투고 : 2020.10.22
  • 심사 : 2021.09.14
  • 발행 : 2021.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The application of Near Surface Mounted (NSM) method to strengthen reinforced concrete (RC) members in flexure through the use of Fiber Reinforced Polymer (FRP) rods has become a subject of interest to designers and researchers over the past few years. This technique has been extensively applied, and there is still a need for more experiments, analytical, and numerical studies to determine the effects of their parameters on the flexural performance of RC members. Therefore, a detailed 3D nonlinear finite element (FE) numerical model was developed in this study to predict the load-carrying capacity and the response of RC T-beams strengthened in the negative moment region accurately through the use of NSM FRP rods at different depth of embedment which are placed under three-point bending loading. The model was, however, designed with due consideration for the nonlinear constitutive material properties of concrete, yielding of steel reinforcement, NSM rods, and cohesive behaviors to simulate the contact between two neighboring materials. Moreover, the findings of the numerical simulations were compared with those from the experiments by other investigators which involve two specimens strengthened with NSM FRP rods added to one unstrengthened control specimen. The results, however, showed that the mid-span deflection responses of the predicted FE were in line with the corresponding data from the experiment for all the flexural loading stages. This was followed by the use of the validated FE models to analyze the effect of several properties of the FRP materials to provide more information than the limited experimental data available. It was discovered that the FE model developed is appropriate to be applied practically and economically with more focus on the parametric studies based on design to precisely model and analyze flexural negative moment strengthening for the RC members through the use of NSM FRP rods.

키워드

과제정보

The fund for this study was provided by the Ministry of Science and Technology, Taiwan (R.O.C) under grant number MOST-108-2625-M-006-006. The first author acknowledges the support of the Ministry of Education, Taiwan (R.O.C) through the provision of the Elite Scholarship as well as the support of the CTCI Foundation Science and Technology Scholarship in the form of the Research Scholarship for International Graduate Students.

참고문헌

  1. Abdallah, M., Al Mahmoud, F., Khelil, A., Mercier, J. and Almassri, B. (2020), "Assessment of the flexural behavior of continuous RC beams strengthened with NSM-FRP bars, experimental and analytical study", Compos. Struct., 242, 112127. https://doi.org/10.1016/j.compstruct.2020.112127.
  2. ACI Committee 318-14 (2014), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, USA.
  3. ACI Committee 440.2R-08 (2008), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, Farmington Hills, USA.
  4. Al-Abdwaisab, A.H. and Al-Mahaidic, R.S. (2020), "Performance of reinforced concrete beams strengthened with NSM CFRP composites for flexure using cement-based adhesives", Struct., 27, 1446-1457. https://doi.org/10.1016/j.istruc.2020.07.047.
  5. Al-Bayati, G., Al-Mahaidi, R. and Kalfat, R. (2016), "Experimental investigation into the use of NSM FRP to increase the torsional resistance of RC Beams using epoxy resins and cement-based adhesives", Constr. Build. Mater., 124, 1153-1164. https://doi.org/10.1016/j.conbuildmat.2016.08.095.
  6. Al-Khafaji, A. and Salim, H. (2020), "Flexural strengthening of RC continuous T-beams using CFRP", Fib., 8(41), 1-18. https://doi.org/10.3390/fib8060041.
  7. Al-Saadi, N.T.K., Mohammed, A., Al-Mahaidi, R. and Sanjayan, J. (2019), "A State-of-the-art review: Near-surface mounted FRP composites for reinforced concrete structures", Constr. Build. Mater., 209, 748-769. https://doi.org/10.1016/j.conbuildmat.2019.03.121.
  8. Al-Saidya, A.H., Al-Harthya, A.S., Al-Jabria, K.S., Abdul-Halim, M. and Al-Shidi, N.M. (2010), "Structural performance of corroded RC beams repaired with CFRP sheets", Compos. Struct., 92(8), 1931-1938. https://doi.org/10.1016/j.compstruct.2010.01.001.
  9. Alam, M.A., Jabbar, A.S.A., Jumaat, M. Z. and Mustapha, K.N. (2014), "Effective method of repairing RC beam using externally bonded steel plate", Appl. Mech. Mater., 567, 399-404. https://doi.org/10.4028/www.scientific.net/AMM.567.399.
  10. Aldhafairi, F., Hassan, A., Abd-EL-Hafez, L.M. and Abouelezz, A.E.Y. (2020), "Different techniques of steel jacketing for retrofitting of different types of concrete beams after elevated temperature exposure", Struct., 28, 713-725. https://doi.org/10.1016/j.istruc.2020.09.017.
  11. Almassri, B. and Halahla, A.M. (2020), "Corroded RC beam repaired in flexure using NSM CFRP rod and an external steel plate", Struct., 27, 343-351. https://doi.org/10.1016/j.istruc.2020.05.054.
  12. Asplund, S.O. (1949), "Strengthening bridge slabs with grouted reinforcement", J. Am. Concrete Inst., 20(6), 397-406.
  13. Attar, H.S., Esfahani, M.R. and Ramezani, A. (2020), "Experimental investigation of flexural and shear strengthening of RC beams using fiber-reinforced self-consolidating concrete jackets", Struct., 27, 46-53. https://doi.org/10.1016/j.istruc.2020.05.032.
  14. Barris, C., Sala, P., Gomez, J. and Torres, L. (2020), "Flexural behaviour of FRP reinforced concrete beams strengthened with NSM CFRP strips", Compos. Struct., 241, 112059. https://doi.org/10.1016/j.compstruct.2020.112059.
  15. Belarbi, A. and Thomas, T.C. (1994), "Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete", ACI Struct. J., 91(4), 465-474. https://doi.org/10.14359/4154.
  16. Budipriyanto, A., Han, A.L. and Hu, H.T. (2018), "Bond-shear behavior of FRP rods as a function of attachment configuration", J. Adv. Res. Civil Environ. Eng., 1(1), 9-17. http://doi.org/10.30659/jacee.1.1.9-17.
  17. Chellapandian, M., Prakash, S.S. and Sharma, A. (2018), "Experimental and finite element studies on the flexural behavior of reinforced concrete elements strengthened with hybrid FRP technique", Compos. Struct., 208, 466-478. https://doi.org/10.1016/j.compstruct.2018.10.028.
  18. Chen, C., Wang, X. and Cheng, L. (2019), "Modeling NSM FRP strengthened RC beams under fatigue due to IC-debonding", Int. J. Fatigue., 126, 174-187. https://doi.org/10.1016/j.ijfatigue.2019.04.039.
  19. Chen, C.C. and Tseng, C.L. (2001), "Ductility Enhancement of RC beams confined by steel cover plates", J. Chin. Inst. Eng., 24(1), 55-64. http://doi.org/10.1080/02533839.2001.9670606.
  20. Construction Agency (2019), General Rules for Revision of Design Code for Concrete Structures, Ministry of Interior, Taipei, Taiwan.
  21. Cosenza, E., Manfredi, G. and Realfonzo, R. (1997), "Behavior and modeling of bond of FRP rebars to concrete", J. Compos. Constr., 1(2), 40-51. https://doi.org/10.1061/(ASCE)1090-0268(1997)1:2(40).
  22. De Lorenzis, L. and Teng, J.G. (2007), "Near-surface mounted FRP Reinforcement: an emerging technique for strengthening structures", Compos. B. Eng., 38(2), 119-143. https://doi.org/10.1016/j.compositesb.2006.08.003.
  23. Deng, Y., Li, Z., Zhang, H., Corigliano, A., Lam, A.C.C., Hansapinyo, C. and Yan, Z. (2021a), "Experimental and analytical investigation on flexural behaviour of RC beams strengthened with NSM CFRP prestressed concrete prisms", Compos. Struct., 257, 113385. https://doi.org/10.1016/j.compstruct.2020.113385.
  24. Deng, Y., Ma, F., Zhang, H., Wong, S.H.F., Pankaj, P., Zhu, L., Ding, L. and Bahadori-Jahromi, A. (2021b), "Experimental study on shear performance of RC beams strengthened with NSM CFRP prestressed concrete prisms", Eng. Struct., 235, 112004. https://doi.org/10.1016/j.engstruct.2021.112004.
  25. Firmo, J.P., Arruda, M.R.T, Correia, J.R. and Rosa, I.C. (2018), "Three-dimensional finite element modelling of the fire behaviour of insulated RC beams strengthened with EBR and NSM CFRP strips", Compos. Struct., 183, 124-136. https://doi.org/10.1016/j.compstruct.2017.01.082.
  26. Haryanto, Y., Gan, B.S. and Maryoto, A. (2017a), "Wire rope flexural bonded strengthening system on RC-beams: A finite element simulation", Int. J. Tech., 8(1), 134-144. https://doi.org/10.14716/ijtech.v8i1.2734.
  27. Haryanto, Y., Gan, B.S., Widyaningrum, A. and Maryoto, A. (2017b), "Near surface mounted bamboo reinforcement for flexural strengthening of reinforced concrete beams", J. Teknologi, 79(6), 233-240. https://doi.org/10.11113/jt.v79.10767.
  28. Haryanto, Y., Gan, B.S., Widyaningrum, A., Wariyatno, N.G. and Fadli, A. (2018), "On the performance of steel wire rope as the external strengthening of RC beams with different end-anchor type", J. Teknologi, 80(5), 145-154. https://doi.org/10.11113/jt.v80.11588.
  29. Haryanto, Y., Han, A.L., Hu, H.T., Hsiao, F.P., Hidayat, B.A. and Widyaningrum A. (2021a), "Enhancement of flexural performance of RC beams with steel wire rope by external strengthening technique", J. Chin. Inst. Eng., 44(3), 193-203. https://doi.org/10.1080/02533839.2021.1871651.
  30. Haryanto, Y., Hu, H.T., Han, A.L, Atmajayanti, A.T., Galuh, D.L.C. and Hidayat, B.A. (2019), "Finite element analysis of Tsection RC beams strengthened by wire rope in the negative moment region with an addition of steel rebar at the compression block", J. Teknologi, 81(4), 143-154. https://doi.org/10.11113/jt.v81.12974.
  31. Haryanto, Y., Hu, H.T., Han, A.L., Hsiao, F.P., Teng, C.J., Hidayat, B.A. and Wariyatno, N.G. (2021b), "Negative moment region flexural strengthening system of RC T-beams with half-embedded NSM FRP rods: a parametric analytical approach", J. Chin. Inst. Eng., 44(6), 553-561. https://doi.org/10.1080/02533839.2021.1936646.
  32. Haryanto, Y., Hu, H.T., Han, A.L., Hsiao, F.P., Teng, C.J., Hidayat, B.A. and Nugroho, L. (2021c), "Nonlinear 3D model of double shear lap tests for the bond of near-surface mounted FRP rods in concrete considering different embedment depth", Period. Polytech. Civil Eng., 65(3), 878-889. https://doi.org/10.3311/PPci.17309.
  33. Hawileh, R.A. (2012), "Nonlinear finite element modeling of RC beams strengthened with NSM FRP rods", Constr. Build. Mater., 27(1), 461-471. https://doi.org/10.1016/j.conbuildmat.2011.07.018.
  34. Hidayat, B.A., Hu, H.T., Han, A.L., Haryanto, Y., Widianingrum, A. and Pamudji, G. (2019), "Nonlinear finite element analysis of traditional flexural strengthening using betung bamboo (Dendrocalamus asper) on concrete beams", IOP Conf. Ser. Mater. Sci. Eng., 615, 012073. https://doi.org/10.1088/1757-899X/615/1/012073.
  35. Hsu, L.S and Hsu, C.T.T. (1994), "Complete stress-strain behaviour of high-strength concrete under compression", Mag. Concrete Res., 46(169), 301-312. https://doi.org/10.1680/macr.1994.46.169.301.
  36. Hu, H.T., Lin, F.M. and Jan, Y.Y. (2004), "Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics", Compos. Struct., 63(3-4), 271-281. https://doi.org/10.1016/S0263-8223(03)00174-0.
  37. Hung, C.C., Prasetya, B.H. and Han, A.L. (2020), "The behavior of reinforced concrete members with section enlargement using self-compacting concrete", Int. Rev. Civil Eng., 11(3), 121-126. https://doi.org/10.15866/irece.v11i3.18574.
  38. Hwang, Y.H., Yang, K.H., Mun, J.H. and Kwon, S.J. (2020), "Axial performance of RC columns strengthened with different jacketing methods", Eng. Struct., 206, 110179. https://doi.org/10.1016/j.engstruct.2020.110179.
  39. Jumaat, M.Z., Rahman, M.M. and Alam, M.A. (2010), "Flexural strengthening of RC continuous T beam using CFRP laminate: A review", Int. J. Phys. Sci., 5(6), 619-625. https://doi.org/10.5897/IJPS.9000263.
  40. Kaplan, H., Yilmaz, S., Cetinkaya, N. and Atimtay, E. (2011), "Seismic strengthening of RC structures with exterior shear walls", Sadhana, 36(17), 17-34. https://doi.org/10.1007/s12046-011-0002-z.
  41. Lee, S.H., Shin, K.J. and Lee, H.D. (2018), "Post-tensioning steel rod system for flexural strengthening in damaged reinforced concrete (RC) beams", Appl. Sci., 8(10), 1763. https://doi.org/10.3390/app8101763.
  42. Lesmana, C., Hu, H.T., Lin, F.M. and Huang, N.M. (2013), "Numerical analysis of square reinforced concrete plates strengthened by fiber-reinforced plastics with various patterns", Compos. B. Eng., 55, 247-262. https://doi.org/10.1016/j.compositesb.2013.06.021.
  43. Lin, C.T., Wu, Y.H., Chin, W.H. and Lin, M.L. (2014), "Performance of CFRP-strengthened RC beams subjected to repeated loads", J. Chin. Inst. Eng., 37(8), 1007-1017. http://doi.org/10.1080/02533839.2014.912778.
  44. National Standardization Agency of Indonesia (2017), Concrete Steel Reinforcement, National Standardization Agency of Indonesia, Jakarta, Indonesia.
  45. Nie, X.F., Zhang, S.S., Chen, G.M. and Yu, T. (2020), "Strengthening of RC beams with rectangular web openings using externally bonded FRP: numerical simulation", Compos. Struct., 248, 112552. https://doi.org/10.1016/j.compstruct.2020.112552.
  46. Nuroji, Hung, C.C., Prasetya, B.H. and Han, A.L. (2020), "The behavior of reinforced concrete members with section enlargement using self-compacting concrete", Int. Rev. Civil Eng., 11(3), 121-126. https://doi.org/10.15866/irece.v11i3.18574.
  47. Parvin, A. and Shah, T.S. (2016), "Fiber reinforced polymer strengthening of structures by near-surface mounting method", Polym., 8(8), 298. https://doi.org/10.3390/polym8080298.
  48. Sabau, C., Popescu, C., Sas, G., Schmidt, J.W., Blanksvard, T. and Taljsten, B. (2018), "Strengthening of RC beams using bottom and side NSM reinforcement", Compos. B. Eng., 149, 82-91. https://doi.org/10.1016/j.compositesb.2018.05.011.
  49. Salama, A.S.D., Hawileh, R.A. and Abdalla, J.A. (2019), "Performance of externally strengthened RC beams with side-bonded CFRP sheets", Compos. Struct., 212, 281-290. https://doi.org/10.1016/j.compstruct.2019.01.045.
  50. Sapulete, C.A. (2018), "Experimental study on the effect of FRP rods and wrap as a flexural strengthening on the RC beams", Master Thesis, Diponegoro University.
  51. Sharaky, I.A., Baena, M., Barris, C., Sallam, H.E.M. and Torres, L. (2018), "Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study", Eng. Struct., 173, 987-1001. https://doi.org/10.1016/j.engstruct.2018.07.062.
  52. Sharaky, I.A., Reda, R.M., Ghanem, M., Seleem, M.H. and Sallam, H.E.M. (2017), "Experimental and numerical study of RC Beams Strengthened with Bottom and Side NSM GFRP bars having different end conditions", Constr. Build. Mater., 149, 882-903. https://doi.org/10.1016/j.conbuildmat.2017.05.192.
  53. Sharaky, I.A., Torres, L. and Sallam, H.E.M. (2015), "Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips", Compos. Struct., 122, 113-126. https://doi.org/10.1016/j.compstruct.2014.11.057.
  54. Sharaky, I.A., Torres, L., Baena, M. and Mias, C. (2013), "An experimental study of different factors affecting the bond of NSM FRP bars in concrete", Compos. Struct., 99, 350-365. https://doi.org/10.1016/j.compstruct.2012.12.014.
  55. Sherwood, E.G. and Soudki, K.A. (2000), "Rehabilitation of corrosion damaged concrete beams with CFRP laminates-a pilot study", Compos. B. Eng., 31(6-7), 453-459. https://doi.org/10.1016/S1359-8368(99)00043-8.
  56. Simulia (2007), Abaqus Technology Brief Projectile Impact on a Carbon Fiber Reinforced Plate, Abaqus Technology Brief.
  57. Stoner, J.G. and Polak, M.A. (2020), "Finite element modelling of GFRP reinforced concrete beams", Comput. Concrete, 25(4), 369-382. http://doi.org/10.12989/cac.2020.25.4.369.
  58. Systemes D. (2011), Dassault Systemes, Rhode Island, USA.
  59. Taljsten, B. and Elfgren, L. (2000), "Strengthening concrete beams for shear using CFRP-materials: Evaluation of different application methods", Compos. B. Eng., 31(2), 87-96. https://doi.org/10.1016/S1359-8368(99)00077-3.
  60. Tan, K.H. (2014), "Beam strengthening by external posttensioning: design recommendations", IES J. Part A: Civil Struct. Eng., 7(4), 219-228. http://doi.org/10.1080/19373260.2014.947086.
  61. Tsai, S.W. and Wu, E.M. (1971), "A general theory of strength for anisotropic materials", J. Compos. Mater., 5(1), 58-80. https://doi.org/10.1177/002199837100500106.
  62. Tudjono, S., Han, A.L. and Gan, B.S. (2017), "Revitalization of cracked flexural members using retrofitting and synthetic wrapping", Proc. Eng., 171, 1123-1128. https://doi.org/10.1016/j.proeng.2017.01.472.
  63. Tudjono, S., Han, A.L. and Gan, B.S. (2018), "An integrated system for enhancing flexural members' capacity via combinations of the fiber reinforced plastic use, retrofitting, and surface treatment techniques", Int. J. Tech., 9(1), 5-15. https://doi.org/10.14716/ijtech.v9i1.298.
  64. Tudjono, S., Han, A.L. and Hidayat, B.A. (2015), "An experimental study to the influence of fiber reinforced polymer (FRP) confinement on beams subjected to bending and shear", Proc. Eng., 125, 1070-1075. https://doi.org/10.1016/j.proeng.2015.11.164.
  65. Wang, Q., Zhu, H., Li, T., Wu, G. and Hu, X. (2019), "Bond performance of NSM FRP bars in concrete with an innovative additional ribs anchorage system: an experimental study", Constr. Build. Mater., 207, 572-584. https://doi.org/10.1016/j.conbuildmat.2019.02.020.
  66. Wei, L., Ming, X. and Zhongfan, C. (2014), "Parameters calibration and verification of concrete damage plasticity model of ABAQUS", Ind. Constr., 44(S1), 167-171.
  67. Xue, W., Tan, Y. and Zeng, L. (2010), "Flexural response predictions of reinforced concrete beams strengthened with prestressed CFRP plates", Compos. Struct., 92(3), 612-622. https://doi.org/10.1016/j.compstruct.2009.09.036.
  68. Yang. Y., Fahmy, M.F.M., Cui, J., Pan, Z. and Shie, J. (2019), "Nonlinear behavior analysis of flexural strengthening of RC beams with NSM FRP laminates", Struct., 20, 374-384. https://doi.org/10.1016/j.istruc.2019.05.001.
  69. Ye, L.P., Lu, X.Z., Ma, Q.L., Cheng, G.Y., Song, S.Y., Miao, Z.W. and Pan, P. (2008), "Study on the influence of post-yielding stiffness to the seismic response of building structures", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, October.
  70. Zhang, S.S. and Teng, J.G. (2014), "Finite element analysis of end cover separation in RC beams strengthened in flexure with FRP", Eng. Struct., 75, 550-560. https://doi.org/10.1016/j.engstruct.2014.06.031.
  71. Zhang, X., Luo, Y., Wang, L., Zhang, J., Wu, W. and Yang, C. (2018), "Flexural strengthening of damaged RC T-beams using self-compacting concrete jacketing under different sustaining load", Constr. Build. Mater., 172, 185-195. https://doi.org/10.1016/j.conbuildmat.2018.03.245.