과제정보
본 연구는 농촌진흥청 연구사업(과제번호: PJ01139701)의 지원에 의해 이루어진 것임.
참고문헌
- Choi M.K., H.R. Ryu, M.W. Cho, and I.H. Yu 2017, Effect of the member joint on structural performance of an arch-type multi-span greenhouse: A full-scale experimental and numerical study. Protected Hort Plant Fac 26:402-410. (in Korean) doi:10.12791/KSBEC.2017.26.4.402
- Choi M.K., H.R. Ryu, M.W. Cho, and I.H. Yu 2018, Evaluation of steel-pipe connections in plastic greenhouse using bending test. Protected Hort Plant Fac 27:391-399. (in Korean) doi:10.12791/KSBEC.2018.27.4.391.
- EN13031-1 2001, Greenhouse: Design and construction - part 1: Commercial production greenhouse. CEN, Brussels, Belgium, pp 34-59.
- Ha T.H., J.W. Kim, B.H. Cho, D.J. Kim, J.E. Jung, S.H. Shin, and H.J. Kim 2017, Finite element model updating of multi-span greenhouses based on ambient vibration measurements. Biosystems Engineering 161:145-156. doi:10.1016/j.biosystemseng.2017.06.019.
- JGHA 2016, Standard for structures safety of greenhouse. Japan Greenhouse Horticulture Association, Tokyo, Japan. pp 23-33.
- Jung J.E., D.J. Kim, H.J. Kim, S.H. Shin, and J.W. Kim 2017, Structural analysis modeling of disaster resilient greenhouse structures. J Comput Struct Eng Inst Korea 30:7-15. (in Korean) doi:10.7734/COSEIK.2017.30.1.7
- Lee J.Y. 2001, Visual fea user's maunal. Intuition Software, Jeonbuk, Korea.
- MAFRA 1999, Standard and explanation for greenhouse structural design. Ministry of Agriculture, Food; Rural Affairs, Suwon, Korea, pp 8-19.
- MAFRA and RDA 2014, Design and construction code on horticultural and herbal facilities for disaster resistance. Ministy of Agriculture, Food Rural Affairs and Rural Development Administration, Sejong, Korea.
- MLIT 2019, KDS 41 10 15. Ministry of Land, Infrastructure and Transport, Sejong, Korea. pp 22-85.
- MOHURD 2017, Code for the design load of horticultural greenhouse structures. Ministry of Housing, Urban-Rural Development, Beijing, PA, China. pp 10-22.
- NGMA 2004, Structural design manual. National Greenhouse Manufacturers Association, USA. pp 14-24.
- Ogawa H., I. Tsuge, Y. Sato, S. Hoshiba, and S. Yamashita 1990, Experimental analysis on strength of pipe-houses with ground anchoring (ii) - yield strength of joints, fixed piles and pipe connectors. Journal of the Society of Agricultural Structures, Japan 20:262-269. doi:10.11449/sasj1971.20.262
- Park J.S., Y.H. Kim, K.K. Seo, and Y.S. Kim 2011, Design of optimum section for structural members of wide span-type and 2-bay venlo-type glass green houses. J Bio-Env Con 20:50-57. (in Korean)
- Ramirez-Gomez A., E. Gallego, J.M. Fuentes, C. Gonzalez-Montellano, C.J. Porras-Prieto, and F. Ayuga 2014, Full-scale tests to measure stresses and vertical displacements in an 18.34m-diameter agricultural steel silo roof. Comput Electron Agric 106:56-65. doi:10.1016/j.compag.2014.05.008.
- Richardson G.M., and G.R. Westgate 1986, Full-scale measurements of the wind loads on film plastic clad greenhouses: A comparison of measured and calculated strains on the supporting hoops of a tunnel greenhouse. J Agric Eng Res 33:101-110. doi:10.1016/S0021-8634(86)80033-6
- Ryu H.R., E.H. Lee, M.W. Cho, I.H. Yu, and Y.C. Kim 2012, Evaluation on the behavioral characteristics of plastic greenhouse by full-scale testing and finite element analysis. J Bio-Env Con 21:459-465. (in Korean) doi:10.12791/KSBEC.2012.21.4.459
- Ryu H.R., M.W. Cho, I.H. Yu, and D.G. Moon 2014, Finite element modeling for structure-soil interaction analysis of plastic greenhouse foundation. Korean J Agric Sci 41:455-460. (in Korean) doi:10.7744/cnujas.2014.41.4.455
- Takahashi K., and Y. Uematsu 2018, Collapse process and reinforcement effects of pipe-framed greenhouses under wind loading based on a 3-D analysis. Journal of the Society of Agricultural Structures, Japan 49:77-85.
- Yu I.H., E.H. Lee, M.W. Cho, H.R. Ryu, and Y.C. Kim 2012, Development of multi-span plastic greenhouse for tomato cultivation. J Bio-Env Con 21:428-436. (in Korean) doi:10.12791/KSBEC.2012.21.4.428
- Ziapour B.M., and R. Dehnavi 2012, A numerical study of the arc-roof and the one-sided roof enclosures based on the entropy generation minimization. Comput Math with Appl 64:1636-1648. doi:10.1016/j.camwa.2012.01.012.