과제정보
This work was supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20171510101960).
참고문헌
- B.J. Goodno, N.C. Gould, P. Caldwell, P.L. Gould, Effects of the January 2010 haitian earthquake on selected electrical equipment, Earthq. Spectra 27 (2011) 251-276, https://doi.org/10.1193/1.3636415.
- J. Hur, Seismic Performance Evaluation of Switchboard Cabinets Using Nonlinear Numerical Models, Georgia Institute of Technology, 2012.
- E. Lim, A Method for Generating Simplified Finite Element Models for Electrical Cabinets, Georgia Institute of Technology, 2016.
- L. Baccarini, M. Capretta, M. Casirati, A. Castaldi, Seismic Qualification Tests of Electric Equipment for Caorso Nuclear Plant: Comments on Adopted Test Procedure and Results, IASMiRT, 1975.
- T.-T. Tran, A.-T. Cao, T.-H.-X. Nguyen, D. Kim, Fragility assessment for electric cabinet in nuclear power plant using response surface methodology, Nucl. Eng. Technol. 51 (2019), https://doi.org/10.1016/j.net.2018.12.025.
- S. Cho, D. Kim, S.C. Design, A simplified model for nonlinear seismic response analysis of equipment cabinets in nuclear power plants, Nucl. Eng. Des. 241 (2011) 2750-2757. https://doi.org/10.1016/j.nucengdes.2011.06.026
- M.K. Kim, I.K. Choi, A failure mode evaluation of a 480V MCC in nuclear power plants at the seismic events, in: 20th Int. Conf. Struct. Mech. React. Technol., Espoo, Finland, 2009.
- A.T. Cao, T.T. Tran, T.H.X. Nguyen, D. Kim, Simplified approach for seismic risk assessment of cabinet facility in nuclear power plants based on cumulative absolute velocity, Nucl. Technol. 206 (2019) 1-15, https://doi.org/10.1080/00295450.2019.1696643.
- K. Salman, T.T. Tran, D. Kim, Grouping effect on the seismic response of cabinet facility considering primary-secondary structure interaction, Nucl. Eng. Technol. 52 (2019) 1318-1326, https://doi.org/10.1016/j.net.2019.11.024.
- T.T. Tran, A.T. Cao, D. Kim, S. Chang, Seismic vulnerability of cabinet facility with tuned mass dampers subjected to high- and low-frequency earthquakes, Appl. Sci. 10 (2020), https://doi.org/10.3390/app10144850.
- W. Djordjevic, J. O'Sullivan, Guidelines for Development of In-Cabinet Amplified Response Spectra for Electrical Benchboards and Panels, 1990.
- A. Gupta, J. Yang, Modified Ritz vector approach for dynamic properties of electrical cabinets and control panels, Nucl. Eng. Des. 217 (2002) 49-62. https://doi.org/10.1016/S0029-5493(02)00133-4
- A. Gupta, S. Rustogi, A. Gupta, Ritz vector approach for evaluating incabinet response spectra, Nucl. Eng. Des. 190 (1999) 255-272. https://doi.org/10.1016/S0029-5493(99)00076-X
- T.-T. Tran, D. Kim, Uncertainty quantification for nonlinear seismic analysis of cabinet facility in nuclear power plants, Nucl. Eng. Des. 355 (2019) 110309, https://doi.org/10.1016/j.nucengdes.2019.110309.
- T.-T. Tran, P.-C. Nguyen, G. So, D. Kim, Seismic behavior of steel cabinets considering nonlinear connections and site-response effects, Steel Compos. Struct. 36 (2020) 17-29. https://doi.org/10.12989/scs.2020.36.1.017
- T.T. Tran, A.T. Cao, K. Salman, P.C. Nguyen, D. Kim, Experimental and numerical modal analysis of cabinet facility considering the connection nonlinearity, in: Lect. Notes Civ. Eng., Springer, 2020, pp. 1093-1100, https://doi.org/10.1007/978-981-15-5144-4_106.
- K. Salman, T.T. Tran, D. Kim, Seismic capacity evaluation of NPP electrical cabinet facility considering grouping effects, J. Nucl. Sci. Technol. 57 (2020) 1-13, https://doi.org/10.1080/00223131.2020.1724206.
- P.C. Nguyen, S.E. Kim, A new improved fiber plastic hinge method accounting for lateral-torsional buckling of 3D steel frames, Thin-Walled Struct. 127 (2018) 666-675, https://doi.org/10.1016/j.tws.2017.12.031.
- F. Taucer, E. Spacone, F.C. Filippou, A Fiber Beam-Column Element for Seismic Response Analysis of Reinforced Concrete Structures, 1991.
- F. Mazza, A distributed plasticity model to simulate the biaxial behaviour in the nonlinear analysis of spatial framed structures, Comput. Struct. 135 (2014) 141-154. https://doi.org/10.1016/j.compstruc.2014.01.018
- N. Noh, L. Liberatore, F. Mollaioli, S. Tesfamariam, Modelling of masonry infilled RC frames subjected to cyclic loads: state of the art review and modelling with OpenSees, Eng. Struct. 150 (2017) 599-621. https://doi.org/10.1016/j.engstruct.2017.07.002
- A. Zendaoui, A. Kadid, D. Yahiaoui, Comparison of different numerical models of RC elements for predicting the seismic performance of structures, Int. J. Concr. Struct. Mater. 10 (2016) 461-478, https://doi.org/10.1007/s40069-016-0170-7.
- P.C. Nguyen, S.E. Kim, Distributed plasticity approach for time-history analysis of steel frames including nonlinear connections, J. Constr. Steel Res. 100 (2014) 36-49, https://doi.org/10.1016/j.jcsr.2014.04.012.
- T.-T. Tran, M. Hussan, D. Kim, P.-C. Nguyen, Distributed plasticity approach for the nonlinear structural assessment of offshore wind turbine, Int. J. Nav. Archit. Ocean Eng. 12 (2020) 743-754. https://doi.org/10.1016/j.ijnaoe.2020.09.003
- A.E. Jeffers, A Fiber-Based Approach for Modeling Beam-Columns under Fire Loading, Virginia Polytechnic Institute and State University, 2009.
- J.P. Conte, P.K. Vijalapura, M. Meghella, Consistent finite-element response sensitivity analysis, J. Eng. Mech. 129 (2003) 1380-1393, https://doi.org/10.1061/(ASCE)0733-9399(2003)129:12(1380).
- M. Menegotto, Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending, in: Proc.. of IABSE symposium on resistance and ultimate deformability of structures acted on by well defined repeated loads. Lisbon, Portugal, Vol. 11, 1973, pp. 15-22.
- F. McKenna, OpenSees: a framework for earthquake engineering simulation, Comput. Sci. Eng. 13 (2011) 58-66. https://doi.org/10.1109/MCSE.2011.66
- R. Brincker, L. Zhang, P. Andersen, Modal identification of output-only systems using frequency domain decomposition, Smart Mater. Struct. 10 (2001) 441-445, https://doi.org/10.1088/0964-1726/10/3/303.
- H. Roh, A. Reinhorn, J. Lee, Power spread plasticity model for inelastic analysis of reinforced concrete structures, Eng. Struct. 39 (2012) 148-161. https://doi.org/10.1016/j.engstruct.2012.01.019
- A. Calabrese, J.P. Almeida, R. Pinho, Numerical issues in distributed inelasticity modeling of RC frame elements for seismic analysis, J. Earthq. Eng. 14 (2010) 38-68, https://doi.org/10.1080/13632461003651869.
- R. Astroza, H. Ebrahimian, J.P. Conte, Material parameter identification in distributed plasticity FE models of frame-type structures using nonlinear stochastic filtering, J. Eng. Mech. 141 (2015), https://doi.org/10.1061/(ASCE)EM.1943-7889.0000851.
- IEEE-693, IEEE Recommended Practice for Seismic Design of Substations, 2005.
- AC156, Acceptance Criteria for Seismic Certification by Shake-Table Testing of Nonstructural Components, 2006.
- D. Gasparini, E. Vanmarcke, SIMQKE: User's Manual and Documentation, 1976.
- M. Barbato, J.P. Conte, Finite element structural response sensitivity and reliability analyses using smooth versus non-smooth material constitutive models, Int. J. Reliab. Saf. 1 (2006) 3-39, https://doi.org/10.1504/ijrs.2006.010688.