Steel and Composite Structures

  • 제41권2호
  • /
  • Pages.223-236
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Deflection of composite cellular beams

  • Hlaing, Hnin Wai (Department of Civil Engineering, Faculty of Engineering, Prince of Songkla University) ;
  • Panedpojaman, Pattamad (Department of Civil Engineering, Faculty of Engineering, Prince of Songkla University)
  • 투고 : 2021.01.08
  • 심사 : 2021.09.15
  • 발행 : 2021.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The deflection of composite (cellular) beams is important for serviceability purposes. However, the available methods to predict the deflection are inaccurate. This research aims to propose a method for predicting the deflection with improved accuracy. The proposed deflection consists of contributions from overall flexural behavior and Vierendeel bending. In addition to the slip action, a reduction factor for computing the effective moment of inertia is investigated and used to compute the flexural deflection. The Vierendeel deformation was determined based on shear deflection of a virtual cantilever beam. No local composite action is conservatively assumed in the cantilever beam. Over 700 three-dimensional finite element (FE) models were simulated to investigate the reduction factor and limitations of the proposed method. The FE model was validated against 13 experimental load-deflection curves from the literature. The proposed method is suitable for predicting the deflection of composite cellular beams having the spacing ratio 1.35 or higher and the span ratio higher than 5. For such cases, the deflection estimate is from 0.90 to 1.05 times the FE deflection. The web-post deformation and the global shear deflection affect the prediction accuracy. In comparison to other methods, the proposed method is more accurate in predicting the deflection.

키워드

과제정보

This study was financially supported by the Graduate School, Prince of Songkla University, Thailand under its scholarship "Thailand's Education Hub for ASEAN Countries" (TEH-AC). Hnin Wai Hlaing is the recipient of the scholarship. The authors sincerely thank Assoc. Prof. Dr. Seppo Karrila and the copy-editing service of the Research and Development Office, the Prince of Songkla University for their support and valuable comments.

참고문헌

  1. ANSI/AISC 360-10 (2010), Specification for Structural Steel Buildings, American Institute of Steel Construction, Illinois, USA.
  2. ArcellarMittal (2008), ACB Cellular Beams, Edition 2008, ArcellarMittal, Luxembourg.
  3. EN 1992-1-1 (2004), Eurocode 2: Design of Concrete Structures. Part 1-1: General Rules and Rules for Buildings.
  4. EN 1994-1-1 (2004), Eurocode 4: Design of Steel and Concrete Composite Structures. Part 1.1: General Rules and Rules for Building.
  5. Ding, F., Liu J., Liu X., Guo F. and Jiang L. (2016), "Flexural stiffness of steel-concrete composite beam under positive moment", Steel Compos. Struct., 20(6), 1369-1389. http://doi.org/10.12989/scs.2016.20.6.1369.
  6. Djebli, B., Kerdal, D.E. and Abidelah A. (2019), "Additional and total deflection of composite symmetric cellular beams" J. Constr. Steel Res., 158, 99-106. https://doi.org/10.1016/j.jcsr.2019.03.015.
  7. Fabsec (2006), Design of FABSEC cellular beams in noncomposite and composite applications for both normal temperature and fire engineering conditions, Edition 2006. Fabsec Ltd., UK.
  8. Kataoka, M.N., Friedrich J.T. and El Debs A.H.C. (2017), "Experimental investigation of longitudinal shear behavior for composite floor slab", Steel Compos. Struct., 23(3), 351-361. http:// doi.org/10.12989/scs.2017.23.3.351.
  9. Lawson, R.M. and Hicks, S.J. (2011), Design of Composite Beams with Web Openings, SCI P355, SCI Publication, Berkshire UK.
  10. Lawson, R.M., Lam, D., Aggelopoulos, E. and Nellinger, S. (2017), "Serviceability performance of composite beams", Proc. Inst. Civ. Eng. Struct. Build., 160(2), 98-114. https://doi.org/10.1680/jstbu.16.00048.
  11. Lawson, R.M., Lim, J.B.P. and Popo-Ola, S.O. (2013), "Pull-out forces in shear connectors in composite beams with large web openings", J. Constr. Steel Res., 87, 48-59. https://doi.org/10.1016/j.jcsr.2013.03.025
  12. Lawson, R.M., Lam, D., Aggelopoulos, E. and Hanus, F. (2018), "Serviceability performance of composite cellular beams with partial shear connection", J. Constr. Steel Res., 150, 491-504. https://doi.org/10.1016/j.jcsr.2018.04.032.
  13. Lawson, R.M. and Basta, A. (2019), "Deflection of C section beams with circular web openings", Thin-Wall. Struct., 134, 277-290. https://doi.org/10.1016/j.tws.2018.10.010.
  14. Leon, R.T. (1990), "Serviceability of composite floor", Proceedings of the 1990, National Steel Construction Conference, AISC, 18:1-18:23.
  15. Leon, R.T. and Alsamsam, I. (1993), "Performance and Serviceability of Composite Floors", Structural Engineering in Natural Hazards Mitigation, Proceedings of the ASCE Structures Congress.
  16. Liu, J., Ding, F., Liu, X. and Yu, Z. (2016) "Study on flexural capacity of simply supported steel-concrete composite beam", Steel Compos. Struct., 21(4), 829-847. http://doi.org/10.12989/scs.2016.20.6.1369
  17. Muller, C., Hechler, O., Bureau, A., Bitar, D., Joyeux, D., Cajot, L.G., Demarco, T., Lawson, R.M., Hicks, S., Devine, P., Lagerqvist, O., Hedman-Petursson, E., Unosson, E. and Feldmann, M. (2006), Large Web Openings for Service Integration in Composite Floors, Technical Steel Research. European Commission, Contract No 7210-PR/315. Final report.
  18. Nadjaia, A., Vassartb, O., Alib, F., Talamonab, D., Allamb, A. and Hawesb, M. (2007), "Performance of cellular composite floor beams at elevated temperatures", Fire Saf. J., 42, 489-497. https://doi.org/10.1016/j.firesaf.2007.05.001.
  19. Nellinger, S., Eggert, F., Kuhlmann, U., Odenbreit, C. and Obiala, R. (2018), "Short-span composite beam tests to evaluate stud resistances", Proc. Inst. Civ. Eng. Struct. Build., 171(1), 17-28. https://doi.org/10.1680/jstbu.16.00173.
  20. Panedpojaman, P. (2018), "Simplified equations for Vierendeel design calculations of composite beams with web openings", Steel Compos. Struct., 27(4), 401-416. https://doi.org/10.12989/scs.2018.27.4.401.
  21. Panedpojaman, P. (2020), Design of steel beam and steel beams with openings, Faculty of Engineering, Prince of Songkla University, Thailand. [in Thai language]
  22. Panedpojaman, P. and Thepchatri, T. (2013), "Finite element investigation on deflection of cellular beams with various configurations", Int. J. Steel Struct., 13(3), 487-494. https://doi.org/10.1007/s13296-013-3008-z
  23. Panedpojaman, P., Thepchatri, T. and Limkatanyu, S. (2019), "Elastic buckling of cellular columns under axial compression", Thin-Wall. Struct., 145, 106434. https://doi.org/10.1016/j.tws.2019.106434.
  24. Qureshi, J. and Lam, D. (2020), "Experimental investigation of shear connector behaviour in composite beams with metal decking", Steel Compos. Struct., 35(4), 475-494. http://doi.org/10.12989/scs.2020.35.4.475.
  25. Ranzi, G. and Zona, A. (2007), "A steel-concrete composite beam model with partial interaction including shear deformability of the steel component", Eng. Struct., 29(11), 3026-3041. https://doi.org/10.1016/j.engstruct.2007.02.007.
  26. Sheehan, T., Dai, X., Lam, D., Aggelopoulos, E., Lawson, M. and Obiala, R. (2016), "Experimental study on long spanning composite cellular beam under flexure and shear", J. Constr. Steel Res., 116, 40-54. https://doi.org/10.1016/j.jcsr.2015.08.047.
  27. Ward, J.K. (1990), Design of Composite and Non-composite Cellular Beams, SCI P100, SCI Publication, Berkshire UK.
  28. Yuan, W., Yu, N., Bao, Z. and Wu, L. (2016), "Deflection of castellated beams subjected to uniformly distributed transverse loading" Int. J. Steel Struct., 16(3), 813-821. https://doi.org/10.1007/s13296-015-0120-2.
  29. Zhou, D., Li, L., Schnell, J., Kurz, W. and Wang, P. (2012) "Elastic deflection of simply supported steel I beams with a web opening", Procedia Eng., 31, 315-323. https://doi.org/10.1016/j.proeng.2012.01.1030.
  30. Zou, G.P., Xia, P.X., Shen, X.H. and Wang, P. (2016), "Investigation on the failure mechanism of steel-concrete steel composite beam", Steel Compos. Struct., 20(6), 1183-1191. http:// doi.org/10.12989/scs.2016.20.6.1183.