Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on Structural Behaviors of Lean Duplex Stainless Steel Connections with Single Bolt and Two Bolts

저니켈 듀플렉스계 스테인리스강 1행1열과 1행2열 볼트접합부의 구조거동에 관한 실험적 연구

  • 박종명 (한밭대학교 건축공학과) ;
  • 김태수 (한밭대학교 건축공학과)
  • Received : 2021.08.19
  • Accepted : 2021.10.08
  • Published : 2021.10.30
⟨ Previous Next ⟩

Abstract

In this paper, experimental study has been performed to investigate the structural behaviors of cold-formed lean duplex stainless steel (STS329FLD) single shear and double shear bolted connections with single bolt and two bolts for providing the basic data of domestic design specification for stainless steel structure. Main variables are shear connection type (single shear and double shear), end distance parallel to the direction of applied force and number of bolts (single bolt and two bolts). Specimens with single bolt failed by shear-out fracture except for some specimens with bolt shear fracture and two-bolted connection showed shear-out fracture at test end. Curling, i.e., out of plane deformation in the direction of plate thickness occurred in single shear two-bolted connections and it led to ultimate strength reduction. Moreover, test strengths were compared with those by current design specifications (Korean Design Standard (KDS)/American Institute of Steel Construction(AISC), Eurocode 3(EC3), American Society of Civil Engineers(ASCE) and American Iron and Steel Institute(AISI)) and strength equations suggested by previous studies.

Keywords

References

  1. American Institute of Steel Construction(AISC). (2016a). Manual of Steel Construction-Load and Resistance Factor Design, AISC, Chicago, IL, USA.
  2. American Iron and Steel Institute(AISI). (2016b). North American Specification for the Design of Cold Formed Steel Structural Members, AISI S100-07, Washington D.C., USA.
  3. American Society of Civil Engineers(ASCE). (2002). Specification for the design of cold-formed stainless steel structural members, SEI/ASCE-8-02, USA.
  4. An, S.H., Kim, G.Y., Hwang, B.K., & Kim, T.S. (2018). An Investigation on the Ultimate Strength of Duplex Stainless Steel (STS329FLD) Bolted Connections with Two Bolts. Journal of the Korea Institute for Structural Maintenance and Inspection(KSMI), 22(5), 55-63. https://doi.org/10.11112/JKSMI.2018.22.5.055
  5. Australian Standard/New Zealand Standard(AS/NZS). (2001). Australian Standard/New Zealand Standard. Cold-formed stainless steel structures, AS/NZS:4673, Australian/New Zealand.
  6. Bouchair, A., Averseng, J., & Abidelah. A. (2008a). Analysis of the behaviour of stainless steel bolted connections. Journal of Constructional Steel Research, 64, 1264-1274. https://doi.org/10.1016/j.jcsr.2008.07.009
  7. Cai. Y., & Young, B. (2014a). Structural behavior of cold-formed stainless steel bolted connections. Thin-Walled Structures, 83, 147-156. https://doi.org/10.1016/j.tws.2014.01.014
  8. Cho, Y.H., The, L.H., Young, B., & Ahmed, A. (2020a). Net section tension strength of bolted connections in ultra-high strength sheet steel during and after fire. Journal of Constructional Steel Research, 172, 106237. https://doi.org/10.1016/j.jcsr.2020.106237
  9. dos Santos, J.D.J., Liang, Y., Zhao, O, de Andrade, S.A.L, de Lima., L.R.O., & Vellasco, P.C.G.D. (2021a). Testing and design of stainless steel staggered bolted connections. Engineering Structures, 231, 111707. https://doi.org/10.1016/j.engstruct.2020.111707
  10. Elliott., M.D., Teh., L.H., & Ahmed, A. (2019a). Behaviour and strength of bolted connections failing in shear. J. Construct. Steel Res, 153(Feb), 320-329. https://doi.org/10.1016/j.jcsr.2018.10.029
  11. European Committee for Standardization(CEN). (2005). EN 1993-1-8 :2005, Eurocode 3, Design of Steel Structures Part 1.8: Design of Joints. London, UK.
  12. European Committee for Standardization(CEN). (2006a). EN 1993-1-3:2006, Eurocode 3 Design of steel structures - Part 1-3: General rules, Supplementary rules for cold-formed members and sheeting, London, UK.
  13. European Committee for Standardization(CEN). (2015a). EN 1993-1-4 :2015, Eurocode3, EN 1993-1-4+A1: Design of Steel Structures - Part 1-4: General Rules -Supplementary Rules for Stainless Steels, London, UK.
  14. Hong, J.H., & Kim, T.S. (2020b). Numerical Analysis on Structural Behaviors of Single Shear Two-Bolted Connection with Lean Duplex Stainless Steel. Journal of Korean Society of Steel Construction, 32(2), 75-84. https://doi.org/10.7781/kjoss.2020.32.2.075
  15. Kang, H.S., & Kim, T.S. (2016c). Strength Estimation of Ferritic Stainless Steel Four-bolted Connections with Curling Influence according to Varied Plate Thickness and End Distance. Journal of the Architectural Institute of Korea, 32(6), 19-26.
  16. Kang, H.S., & Kim, T.S. (2019b). Experimental Study on Structural Behaviors of Duplex Stainless Steel(STS329FLD) Bolted Connections with Four Bolts. Journal of Korean Society of Steel Construction, 31(1), 13-22. https://doi.org/10.7781/kjoss.2019.31.1.013
  17. Kim, T.S., & Cho, T.J. (2013). Influence of Microstructure Difference of Stainless Steels on the Strength and Fracture of Bolted Connections. ISIJ International, 53(2), 365-374. https://doi.org/10.2355/isijinternational.53.365
  18. Kim, T.S., Hong, S.K., Hwang, B.K., & Kim, J.S. (2021b). Block shear capacity in cold-formed lean duplex stainless steel double-shear bolted connections. Thin-Walled Structures, 161, 107520. https://doi.org/10.1016/j.tws.2021.107520
  19. Kim, T.S., Hwang, B.K., & Lim, Y.C. (2020c). Development on ultimate strength equation of ferritic stainless steel (STS430) two-bolted connection. Advances in Structural Engineering, 23(6), 1209-1223. https://doi.org/10.1177/1369433219891592
  20. Kim, T.S., Jeong, H.Y., Kim, M.S., & Lim, J.S. (2010a). An Experimental Study on Behavior of Single Shear Bolted Connections with Thin-walled Stainless Steel. Journal of the Architectural Institute of Korea, 26(5), 11-18.
  21. Kim, T.S., Kim, M.S., Jeong, H.Y., Kim, S.H., & Lee, Y.T. (2010b). Comparative Study on Ultimate Behavior of Single shear and Double Shear Bolted Connections with Thin-walled Carbon Steel. Journal of the Architectural Institute of Korea, 26(4), 31-38.
  22. Kim, T.S., & Kuwamura, H. (2007). Finite element modeling of bolted connections in thin walled stainless steel plates under static shear. Thin-Walled Structures, 45, 407-21.
  23. Kim, T.S., Kuwamura, H., & Cho, T.J. (2008b). A parametric study on ultimate strength of single shear bolted connections with curling. Thin-Walled Structures, 46, 38-53. https://doi.org/10.1016/j.tws.2007.08.009
  24. Korea Construction Standards Center, Korean Design Standard(KDS). (2019c). Steel Connection Design Criteria (Load Resistance Factor Design), KDS 14 31 25. Seoul, Korea.
  25. Korea Construction Standards Center, Korean Design Standard(KDS). (2020d). Design Specification of Cold-formed Stainless Steel Structures, KDS 41 30 40 (Draft). Seoul, Korea.
  26. Korean Agency for Technology and Standards, Korea Industrial Standards(KS). (2020e). KS D 3698 : Cold rolled stainless steel plates, sheets and strip, Seoul, Korea.
  27. Korean Society of Steel Construction(KSSC). (2020f). Design of Stainless Steel Structures. KSSC. Seoul, Korea.
  28. Stainless Steel Building Association of Japan(SSBA). (2006b). Design manual of light- weight stainless steel structures, Tokyo, Japan.
  29. Teh, L.H., & Uz, M.E. (2014b). Effect of loading direction on the bearing capacity of cold-reduced sheet steels. J. Struct. Eng. 140(12), 06014005. https://doi.org/10.1061/(asce)st.1943-541x.0001107
  30. Teh, L.H., & Uz, M.E. (2015b). Ultimate shear-out capacity of structural steel bolted connections. J. Struct. Eng., 141(6), 04014152. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001105
  31. Teh, L.H., & Uz, M.E. (2016d). Combined bearing and shear-out capacities of structural steel bolted connections. J. Struct. Eng., 142(11), 04016098. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001573
  32. Xing, H., The, L.H, Jiang, Z., & Ahmed, A. (2020g). Shear-Out Capacity of Bolted Connections in Cold-Reduced Steel Sheets. J. Struct. Eng., 146(4), 04020018. https://doi.org/10.1061/(asce)st.1943-541x.0002565