Corrosion Science and Technology

  • 제20권4호
  • /
  • Pages.196-203
  • /
  • 2021
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

자동차용 핫스탬핑 AlSi 도금중 Mg 첨가효과

Effects of Adding Mg to AlSi Coating for Hot Stamping Steel

  • 투고 : 2021.06.18
  • 심사 : 2021.06.27
  • 발행 : 2021.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

To improve corrosion resistance and reduce the hydrogen uptake of 22MnB5, up to 5% Mg was added to the AlSi coating of 22MnB5. After hot-stamping and electrocoating were done on the metallic-coated specimen, the surface characteristics of the steel, hydrogen uptake content, and corrosion resistance were examined by transmittance electron microscopy, thermal desorption spectrometry, cyclic corrosion testing, and electrochemical impedance spectroscopy. Mg was investigated as MgO on the surface layer after hot-stamping while it existed as Mg2Si before hot-stamping. The total hydrogen content of 22MnB5 was decreased along with the Mg content. However, there was no difference at 0.2 wt% or more. When a small amount of Mg was added, the coating corrosion resistance was decreased, but when it was added at around 1.0 wt%, the greatest corrosion resistance increase was seen. However, when 3 wt% or more was added excessively, the corrosion resistance was decreased. MgO on the surface was considered to suppress H uptake by the AlSi melting solution and increase the barrier effect of the coating.

키워드

참고문헌

  1. Z. Qifu and J. Sheming, Proc. 11th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2017), p. 18, The Iron and Steel Institute of Japan, Tokyo, Japan (2017).
  2. R. Rana and S. b. Singh, Automotive Steel : Design, Metallurgy, Processing and Applications, 1st ed., p. 37, Elsevier (2017).
  3. T. K. Roy, B. Bhattacharya, C. Ghosh, and S. K. Ajmani, Advanced High Strength Steel : Processing and Application, 1st ed., p. 50, Springer (2018).
  4. N. Fujita, K. Kusumi, K. Matsumura, T. Nonaka, and T. Tomokiyo, Present Situation and Future Trend of UltraHigh Strength Steel Sheets for Auto-Body, Nippon Steel Technical Report, 103, 99 (2013).
  5. E. Billur, Hot Stamping of Ultra High Strength Steels, 1st ed., pp. 19 - 76, Springer (2019).
  6. C. K. Kim, S. K. Cho, W. S. Yang, A. I. Karayan, and H. Castaneda, Corrosion behavior of Al-Si-Mg coated hotpress-forming steel, Corrosion Science, 183, 109339 (2021). Doi: https://doi.org/10.1016/j.corsci.2021.109339
  7. M. Suehiro, J. Maki, K. Kusumi, M. Ohgami, and T. Miyakoshi, Properties of Aluminum-coated Steels for Hot Stamping, Nippon Steel Technical Report, 88, 16 (2003).
  8. P. Drillet, Proc. 11th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2017), p. 401, The Iron and Steel Institute of Japan, Tokyo, Japan (2017).
  9. C. Alley, L. Dosdat, O. Clauzeau, K. Ogle, and P. Volovitch, Anticorrosion mechanisms of aluminized steel for hot stamping, Surface Coating & Technology, 238, 188 (2014). Doi: https://doi.org/10.1016/j.surfcoat.2013.10.072
  10. C. Nicard, C. Allely, and P. Volvovitch, Effect of Zn and Mg alloying on microstructure and anticorrosion mechanisms of Al-Si based coatings for high strength steel, Corrosion Science, 146, 192 (2019). Doi: https://doi.org/10.1016/j.corsci.2018.10.037
  11. M. Ruthenberg, J. Banik, G. Reimann, M. Norden, and F. Friedel, Proc. 11th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2017), p. 417, The Iron and Steel Institute of Japan, Tokyo, Japan (2017).
  12. M. Nagumo, Fundamentals of Hydrogen Embrittlement, 1st ed., pp. 137-165, Springer (2016). Doi: https://doi.org/10.1007/978-981-10-0161-1
  13. M. Okayasu and T. Fujiwara, Hydrogen embrittlement characteristics of hot-stamped 22MnB5 steel, International Journal of Hydrogen Energy, 46, 19657 (2021). Doi : https://doi.org/10.1016/j.ijhydene.2021.03.092
  14. A. Cherubini, Linda Bacchi, S. Corsinovi, M. Beghini, and R. Valentini, Hydrogen Embrittlement in Advanced High Strength Steels and Ultra High Strength Steels: a new investigation approach, Procedia Structural Intergrity, 13, 753 (2018). https://doi.org/10.1016/j.prostr.2018.12.125
  15. W. S. Yang, J. W. Seo, and S. H. Ahn, A Study on Hydrogen Embrittlement Research on Automotive Steel Sheets, Corrosion Science and Technology, 17, 193 (2018). Doi: http://dx.doi.org/10.14773/cst.2018.17.4.193
  16. M. Kubo, Y. Nakazawa, T. Suzuki, N. Nomura, S. Fujita, H. Irikawa, and K. Hong, Plated steel sheet for hot stamping, method of manufacturing plated steel sheet for hot stamping, method of manufacturing hot-stamped component, and method of manufacturing vehicle, US20200024748A1 (2020.01.23.)
  17. N. Takata, M. Nishimoto, S. Kobayashi, and M. Takeyama, Morphology and formation of Fe-Al intermetallic layers on iron hot-dipped in Al-Mg-Si alloy melt, Intermetallics, 54, 136 (2014). Doi: https://doi.org/10.1016/j.intermet.2014.06.003
  18. D. W. Fan and B. C. De Cooman, State-of-the-Knowledge on Coating Systems for Hot Stamped Parts, Steel Research international, 83, 412 (2012). Doi: https://doi.org/10.1002/srin.201100292
  19. R. K. Gupta, N. L. Sukiman, K. M. Fleming, M. A. Gibson, and N. Birbils, Electrochemical Behavior and Localized Corrosion Associated with Mg2Si Particles in Al and Mg Alloys, ECS Electrochemistry Letters, 1, C1 (2012). https://doi.org/10.1149/2.002201eel
  20. Q. Chen, J. Li, Y, Li, A review of plasma-liquid interactions for nanomaterial synthesis, Journal of Physics D: Applied Physics, 48, 424005 (2015) Doi: https://doi.org/10.1088/0022-3727/48/42/424005
  21. M. Barreau, C. Methivier, T. Sturel, C. Allely, P. Drillet, S. Cremel, R. Grigoieva, B. Nabi, R. Podor, J. Lautru, V. Humblot, J. Landoulsi, and X. Carrier, In situ surface imaging: High temperature environmental SEM study of the surface changes during heat treatment of an AlSi coated boron steel, Materials Characterization, 163, 110266 (2020). Doi: https://doi.org/10.1016/j.matchar.2020.110266
  22. C. Georges, T. Sturel, P. Drillet, and J. M. Mataigne, Absorption/Desorption of Diffusible Hydrogen in Aluminized Boron Steel, ISIJ International, 53, 1295 (2013). Doi: https://doi.org/10.2355/isijinternational.53.1295