Structural Engineering and Mechanics

  • 제80권1호
  • /
  • Pages.83-90
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimum design for thermal buckling of composite plates with semi triangular cutout using PSO algorithm

  • Mahdavi, S. (Faculty of Mechanical and Mechatronics Engineering, Shahrood University of Technology) ;
  • Shaterzadeh, A.R. (Faculty of Mechanical and Mechatronics Engineering, Shahrood University of Technology) ;
  • Jafari, M. (Faculty of Mechanical and Mechatronics Engineering, Shahrood University of Technology)
  • 투고 : 2019.05.19
  • 심사 : 2021.08.03
  • 발행 : 2021.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this work, the optimization of the effective parameters on the thermal buckling of a square composite plate with various stacking sequence containing quasi- triangular cutout in the center using particle swarm optimization (PSO) to achieve the maximum resistance of plate against thermal buckling load is done. It is assumed that the plate is under a uniform temperature distribution. The stability equations are based on the first order shear deformation theory. The thermal buckling analysis and the PSO algorithm are performed using the code developed in MATLAB software. In this study, the design variables are: fiber angle, bluntness of cutout corners, cutout orientation, and cutout size to plate size ratio, which are determined by using the PSO algorithm to optimize the parameters for the highest critical buckling temperature. The results showed that the plate with a quasi-triangular cutout has more resistance to thermal buckling than the plate with a circular cutout. It was also found that the thermal buckling of a composite plate is dependent on various parameters and the maximum thermal buckling load can be achieved by the appropriate selection of these parameters.

키워드

참고문헌

  1. Abolghasemi, S., Shaterzadeh, A.R. and Rezaei, R. (2014), "Thermo-mechanical buckling analysis of functionally graded plates with an elliptic cutout", Aerosp. Sci. Technol., 39, 250-259. https://doi.org/10.1016/j.ast.2014.10.004.
  2. Aydogdu, M. and Aksencer, T. (2018), "Buckling of cross-ply composite plates with linearly varying In-plane loads", Compos. Struct., 183, 221-231. https://doi.org/10.1016/j.compstruct.2017.02.085.
  3. Bremec, B. and Kosel, F. (2006), "Thickness optimization of circular annular plate at buckling", Thin Wall. Struct., 44(1), 74-81. https://doi.org/10.1016/j.tws.2005.08.011.
  4. Civalek, O. (2017), "Buckling analysis of composite panels and shells with different material properties by discrete singular convolution (DSC) method", Compos. Struct., 161, 93-110. https://doi.org/10.1016/j.compstruct.2016.10.077.
  5. Clerc, M. and Kennedy, J. (2002), "The particle swarm-explosion, stability and convergence in a multidimensional complex space", IEEE T. Evolut. Comput., 6(1), 58-73. https://doi.org/10.1109/4235.985692.
  6. De Almeida, F.S. (2016), "Stacking sequence optimization for maximum buckling load of composite plates using harmony search algorithm", Compos. Struct., 143, 287-299. https://doi.org/10.1016/j.compstruct.2016.02.034.
  7. Dhurvey, P. (2017), "Buckling analysis of composite laminated skew plate of variable thickness", Mater. Today, 4(9), 9732-9736. https://doi.org/10.1016/j.matpr.2017.06.257.
  8. Dorigo, M., Maniezzo, V. and Colorni, A. (1996), "Ant system: optimization by a colony of cooperating agents", IEEE Tran. Syst. Man Cybern., Part B (Cybernet.), 26(1), 29-41. https://doi.org/10.1109/3477.484436.
  9. Foroutan, K., Shaterzadeh, A. and Ahmadi, H. (2018), "Nonlinear dynamic analysis of spiral stiffened functionally graded cylindrical shells with damping and nonlinear elastic foundation under axial compression", Struct. Eng. Mech., 66(3), 295-303. http://doi.org/10.12989/sem.2018.66.3.295.
  10. Hussein, O.S. and Mulani, S.B. (2018), "Optimization of in-plane functionally graded panels for buckling strength: Unstiffened, stiffened panels, and panels with cutouts", Thin Wall. Struct., 122, 173-181. https://doi.org/10.1016/j.tws.2017.10.025.
  11. Jafari, M., Hoseyni, S.A.M. and Chaleshtari, M.H.B. (2016), "Determination of optimal parameters for perforated plates with quasi-triangular cutout by PSO", Struct. Eng. Mech., 60(5), 795-807. http://doi.org/10.12989/sem.2016.60.5.795.
  12. Jing, Z., Fan, X. and Sun, Q. (2015), "Stacking sequence optimization of composite laminates for maximum buckling load using permutation search algorithm", Compos. Struct., 121, 225-236. https://doi.org/10.1016/j.compstruct.2014.10.031.
  13. Kumar, R.V. and Rao, G.K. (2018), "Thermal buckling analysis of laminated composite plate with square/rectangular, elliptical/circular cutout", Mater. Today, 5(2), 5354-5363. https://doi.org/10.1016/j.matpr.2017.12.121.
  14. Logan, D.L. (2012), A First Course in The Finite Element Method, 5th Edition, Cengage Learning, USA.
  15. Moussavian, H. and Jafari, M. (2017), "Optimum design of laminated composite plates containing a quasi-square cutout", Struct. Multidisc. Optim., 55(1), 141-154. https://doi.org/10.1007/s00158-016-1481-7.
  16. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells-Theory and Analysis, CRC Press, Boca Raton, Florida.
  17. Sahin, O.S. (2005), "Thermal buckling of hybrid angle-ply laminated composite plates with a hole", Compos. Sci. Technol., 65, 1780-1790. https://doi.org/10.1016/j.compscitech.2005.03.007.
  18. Shaterzadeh, A. and Foroutan, K. (2016), "Post-buckling of cylindrical shells with spiral stiffeners under elastic foundation", Struct. Eng. Mech., 60(4), 615-631. http://doi.org/10.12989/sem.2016.60.4.615.
  19. Shaterzadeh, A., Foroutan, K. and Ahmadi, H. (2019), "Nonlinear static and dynamic thermal buckling analysis of spiral stiffened functionally graded cylindrical shells with elastic foundation", Int. J. Appl. Mech., 11(01), 1950005. https://doi.org/10.1142/S1758825119500054.
  20. Shaterzadeh, A.R. Abolghasemi, S. and Rezaei, R. (2014), "Finite element analysis of thermal buckling of rectangular laminated composite plates with circular cut-out", J. Therm. Stress., 37(5), 604-623. https://doi.org/10.1080/01495739.2014.885322.
  21. Shokrieh, M.M. and Parkestani, A.N. (2017), "Post buckling analysis of shallow composite shells based on the third order shear deformation theory", Aerosp. Sci. Technol., 66, 332-341. https://doi.org/10.1016/j.ast.2017.01.011.
  22. Taheri-Behrooz, F., Omidi, M. and Shokrieh, M. M. (2017), "Experimental and numerical investigation of buckling behavior of composite cylinders with cutout", Thin Wall. Struct., 116, 136-144. https://doi.org/10.1016/j.tws.2017.03.009.
  23. Tian, K., Ma, X., Li, Z., Lin, S., Wang, B. and Waas, A.M. (2020), "A multi-fidelity competitive sampling method for surrogate-based stacking sequence optimization of composite shells with multiple cutouts", Int. J. Solid. Struct., 193, 1-12. https://doi.org/10.1016/j.ijsolstr.2020.02.007.
  24. Topal, U. and Uzman, u. (2007), "Optimum design of laminated composite plates to maximize buckling load using MFD method", Thin Wall. Struct., 45(7-8), 660-669. https://doi.org/10.1016/j.tws.2007.06.002.
  25. Topal, U. and Uzman, u. (2009), "Effects of nonuniform boundary conditions on the buckling load optimization of laminated composite plates", Mater. Des., 30(3), 710-717. https://doi.org/10.1016/j.matdes.2008.05.012.
  26. Vosoughi, A.R., Darabi, A. and Forkhorji, H.D. (2017), "Optimum stacking sequences of thick laminated composite plates for maximizing buckling load using FE-GAs-PSO", Compos. Struct., 159, 361-367. https://doi.org/10.1016/j.compstruct.2016.09.085.
  27. Yang, X., Yuan, J. and Mao, H. (2007), "A modified particle swarm optimizer with dynamic adaptation", Appl. Math. Comput., 189(2), 1205-1213. https://doi.org/10.1016/j.amc.2006.12.045.