Steel and Composite Structures

  • 제41권1호
  • /
  • Pages.115-122
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fire performance of edge and interior circular steel-reinforced concrete-filled steel tubular stub columns

  • Meng, Fan-Qin (Department of Civil Engineering, Shanghai Normal University) ;
  • Zhu, Mei-Chun (Department of Civil Engineering, Shanghai Normal University) ;
  • Clifton, G. Charles (Department of Civil and Environmental Engineering, The University of Auckland) ;
  • Ukanwa, Kingsley U. (Structural Engineer, Aurecon) ;
  • Lim, James B.P. (Department of Civil and Environmental Engineering, The University of Auckland)
  • 투고 : 2019.10.25
  • 심사 : 2021.08.25
  • 발행 : 2021.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

The steel-reinforced concrete-filled steel tubular column (SRCFT) is a new form of composite columns. Before widely accepted in engineering practice, its fire behaviour shall be fully understood. Four representative circular SRCFT stub columns were built and tested to failure under ISO fire herein. The tests explored the effect of reinforced steel, the internal or external heating condition and load ratios. The experimental results indicated that the inserted section steel significantly improved the fire resistance of circular SRCFT columns. The non-uniform fire condition did not produce a detrimental effect on the fire response of the specimen. The numerical model was developed and validated against the experimental results. Then a parametric study was present to evaluate the effect of load level, eccentricity and heating conditions. A comparison was made to check the accuracy of a widely accepted design method. The comparison indicated the design method was generally 36% conservative for axially loaded condition and 25% un-conservative for eccentrically loaded condition.

키워드

과제정보

This work was financially supported by foundations from Science and Technology Commission of Shanghai Municipality (18070502900; 18ZR1427900). The financial support is appreciated.

참고문헌

  1. EN 1992-1-2 (2004), Eurocode 2: Design of concrete structures-Part 1-2: General rules-Structural fire design, European Committee for Standardization; Brussels, Belgium.
  2. EN 1994-1-2 (2005), Eurocode 4: design of composite steel and concrete structures. Part 1-2: general rules - structural fire design, European Committee for Standardization; Brussels, Belgium.
  3. JGJ 55 (2011), Specification for Mix Proportion Design of Ordinary Concrete. Architecture & Building Press; Beijing, China.
  4. Albero, V., Espinos, A., Romero, M. L., Hospitaler, A., Bihina, G., and Renaud, C. (2016), "Proposal of a new method in EN1994-1-2 for the fire design of concrete-filled steel tubular columns", Eng. Struct., 128, 237-255. https://doi.org/10.1016/j.engstruct.2016.09.037.
  5. Cai, J., Pan, J. and Wu, Y. (2015), "Mechanical behavior of steel-reinforced concrete-filled steel tubular (SRCFST) columns under uniaxial compressive loading", Thin-Wall. Struct., 97, 1-10. https://doi.org/10.1016/j.tws.2015.08.028.
  6. Ellobody, E. and Young, B. (2006), "Nonlinear analysis of concrete-filled steel SHS and RHS columns", Thin-Wall. Struct., 44(8), 919-930. https://doi.org/10.1016/j.tws.2006.07.005.
  7. Ellobody, E. and Young, B. (2010), "Investigation of concrete encased steel composite columns at elevated temperatures", Thin-Wall. Struct., 48(8), 597-608. https://doi.org/10.1016/j.tws.2010.03.004.
  8. Espinos, A., Romero, M.L. and Hospitaler, A. (2010), "Advanced model for predicting the fire response of concrete filled tubular columns", J. Constr. Steel Res., 66(8-9), 1030-1046. https://doi.org/10.1016/j.jcsr.2010.03.002.
  9. Espinos, A., Romero, M.L., Serra, E. and Hospitaler, A. (2015), "Circular and square slender concrete-filled tubular columns under large eccentricities and fire", J. Constr. Steel Res., 110: 90-100. https://doi.org/10.1016/j.jcsr.2015.03.011.
  10. Espinos, A., Romero, M.L., Serra, E. and Hospitaler, A. (2015), "Experimental investigation on the fire behaviour of rectangular and elliptical slender concrete-filled tubular columns", Thin-Wall. Struct., 93, 137-148. https://doi.org/10.1016/j.tws.2015.03.018.
  11. Han, L.H. (2007), Concrete Filled Steel Tubular Structures (Second version). Science Press, Beijing, China (in Chinese).
  12. Han, L.H., Tan, Q.H. and Song, T.Y. (2015), "Fire performance of steel reinforced concrete columns", J. Struct. Eng., 141(4), 04014128. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001081.
  13. Han, L.H., Zhou, K., Tang, Q.H. and Song T.Y. (2020), "Performance of steel reinforced concrete columns after exposure to fire: Numerical analysis and application", Eng. Struct., 211, 110421. https://doi.org/10.1016/j.engstruct.2020.110421.
  14. Han, L.H., Yang, Y.F. and Xu, L. (2003), "An experimental study and calculation on the fire resistance of concrete-filled SHS and RHS columns", J. Constr. Steel Res., 59(4), 427-452. https://doi.org/10.1016/S0143-974X(02)00041-X.
  15. Hsu, H.L. and Halim, H. (2017), "Improving seismic performance of framed structures with steel curved dampers", Eng. Struct., 130, 99-111. https://doi.org/10.1016/j.engstruct.2016.09.063. .
  16. Kodur, V.K.R., Wang, T.C. and Cheng, F.P. (2004), "Predicting the fire resistance behaviour of high strength concrete columns", Cement Concrete Compos., 26(2), 141-153. https://doi.org/10.1016/S0958-9465(03)00089-1.
  17. Lie, T.T. and Kodur, V.K.R. (1996), "Fire resistance of steel columns filled with bar-reinforced concrete", J. Struct. Eng., 122(1), 30-36. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(30).
  18. Mago, N. and Hicks, S.J. (2016), "Fire behaviour of slender, highly utilized, eccentrically loaded concrete filled tubular columns", J. Constr. Steel Res., 119, 123-132. https://doi.org/10.1016/j.jcsr.2015.12.002.
  19. Mou, B., Li, X., Bai, Y. and Wang, L. (2018), "Shear behavior of panel zones in steel beam-to-column connections with unequal depth of outer annular stiffener", J. Struct. Eng., 145(2), 04018247. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002256.
  20. Mou, B., X Li, Qiao, Q., He, B, and Wu, M. (2019), "Seismic behaviour of the corner joints of a frame under biaxial cyclic loading", Eng. Struct., 196, 109316. https://doi.org/10.1016/j.engstruct.2019.109316.
  21. Mou, B., Zhao, F., Qiao, Q., Wang, L. and Hao, Z. (2019), "Flexural behavior of beam to column joints with or without an overlying concrete slab", Eng. Struct., 199, 109616. https://doi.org/10.1016/j.engstruct.2019.109616.
  22. Tang, C.W. (2017), "Fire resistance of high strength fiber reinforced concrete filled box columns", Steel Compos. Struct., 23(5), 611-621. https://doi.org/10.12989/scs.2017.23.5.611.
  23. Tang, C.W. (2018), "Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading", Steel Compos. Struct., 27(2), 243-253. https://doi.org/10.12989/scs.2018.27.2.243.
  24. Ukanwa, K.U., Clifton, G.C., Lim, J.B.P., Hicks, S.J., Sharma, U. and Abu, A. (2018), "Simple design procedure for concrete filled steel tubular columns in fire", Eng. Struct., 155, 144-156. https://doi.org/10.1016/j.engstruct.2017.10.062.
  25. Wang, Q., Zhao, D. and Guan, P. (2004), "Experimental study on the strength and ductility of steel tubular columns filled with steel-reinforced concrete", Eng. Struct., 26(7), 907-915. https://doi.org/10.1016/j.engstruct.2004.02.009.
  26. Zhu, M., Liu, J., Wang, Q. and Feng, X. (2010), "Experimental research on square steel tubular columns filled with steel-reinforced self-consolidating high-strength concrete under axial load", Eng. Struct., 32(8), 2278-2286. https://doi.org/10.1016/j.engstruct.2010.04.002