Acknowledgement
This study was financially supported by Department of Prosthodontics, College of Dentistry, Dankook University.
References
- Bagby M, Marshall SJ, Marshall GW Jr. Metal ceramic compatibility: a review of the literature. J Prosthet Dent 1990;63:21-5. https://doi.org/10.1016/0022-3913(90)90259-F
- Isgro G, Pallav P, van der Zel JM, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 2003;90:465-73. https://doi.org/10.1016/j.prosdent.2003.08.003
- Kim HK, Kim SH, Lee JB, Han JS, Yeo IS, Ha SR. Effect of the amount of thickness reduction on color and translucency of dental monolithic zirconia ceramics. J Adv Prosthodont 2016;8:37-42. https://doi.org/10.4047/jap.2016.8.1.37
- Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989;23:45-61. https://doi.org/10.1002/jbm.820230105
- Teichmann M, Wienert AL, Ruckbeil M, Weber V, Wolfart S, Edelhoff D. Ten-year survival and chipping rates and clinical quality grading of zirconia-based fixed dental prostheses. Clin Oral Investig 2018;22:2905-15. https://doi.org/10.1007/s00784-018-2378-1
- Stefanescu C, Ionita C, Nechita V, Drafta S, Oancea L, Petre A. Survival Rates and Complications for Zirconia-Based Fixed Dental Prostheses in a Period up to 10 Years: A Systematic Review. Eur J Prosthodont Restor Dent 2018;26:54-61.
- Christensen GJ. The all-ceramic restoration dilemma: where are we? J Am Dent Assoc 2011;142:668-71. https://doi.org/10.14219/jada.archive.2011.0251
- Marchack BW, Sato S, Marchack CB, White SN. Complete and partial contour zirconia designs for crowns and fixed dental prostheses: a clinical report. J Prosthet Dent 2011;106:145-52. https://doi.org/10.1016/S0022-3913(11)60112-1
- Thalji GN, Cooper LF. Implant-supported fixed dental rehabilitation with monolithic zirconia: a clinical case report. J Esthet Restor Dent 2014;26:88-96. https://doi.org/10.1111/jerd.12078
- Malkondu O, Tinastepe N, Kazazoglu E. Influence of type of cement on the color and translucency of monolithic zirconia. J Prosthet Dent 2016;116:902-8. https://doi.org/10.1016/j.prosdent.2016.05.001
- da Silva LH, de Lima E, de Paula Miranda RB, Favero SS, Lohbauer U, Cesar PF. Dental ceramics: a review of new materials and processing methods. Braz Oral Res 2017;31 Suppl 1:e58.
- da Silva LH, de Lima E, Hochman M, Ozcan M, Cesar PF. Monolithic Zirconia for Prosthetic Reconstructions : Advantages and Limitations. Curr Oral Health Rep 2017;4:197-200. https://doi.org/10.1007/s40496-017-0153-z
- Zhang F, Inokoshi M, Batuk M, Hadermann J, Naert I, Van Meerbeek B, Vleugels J. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations. Dent Mater 2016;32:e327-37. https://doi.org/10.1016/j.dental.2016.09.025
- Kwon SJ, Lawson NC, McLaren EE, Nejat AH, Burgess JO. Comparison of the mechanical properties of translucent zirconia and lithium disilicate. J Prosthet Dent 2018;120:132-7. https://doi.org/10.1016/j.prosdent.2017.08.004
- Zhang Y, Lawn BR. Novel Zirconia Materials in Dentistry. J Dent Res 2018;97:140-7. https://doi.org/10.1177/0022034517737483
- Ueda K, Guth JF, Erdelt K, Stimmelmayr M, Kappert H, Beuer F. Light transmittance by a multi-coloured zirconia material. Dent Mater J 2015;34:310-4. https://doi.org/10.4012/dmj.2014-238
- Baldissara P, Llukacej A, Ciocca L, Valandro FL, Scotti R. Translucency of zirconia copings made with different CAD/CAM systems. J Prosthet Dent 2010;104:6-12. https://doi.org/10.1016/S0022-3913(10)60086-8
- Sato H, Yamada K, Pezzotti G, Nawa M, Ban S. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment. Dent Mater J 2008;27:408-14. https://doi.org/10.4012/dmj.27.408
- Zhang Y. Making yttria-stabilized tetragonal zirconia translucent. Dent Mater 2014;30:1195-203. https://doi.org/10.1016/j.dental.2014.08.375
- Nakamura K, Harada A, Ono M, Shibasaki H, Kanno T, Niwano Y, Adolfsson E, Milleding P, Ortengren U. Effect of low-temperature degradation on the mechanical and microstructural properties of tooth-colored 3Y-TZP ceramics. J Mech Behav Biomed Mater 2016;53:301-11. https://doi.org/10.1016/j.jmbbm.2015.08.031
- Shamseddine L, Majzoub Z. Relative Translucency of a Multilayered Ultratranslucent Zirconia Material. J Contemp Dent Pract 2017;18:1099-106. https://doi.org/10.5005/jp-journals-10024-2183
- Kolakarnprasert N, Kaizer MR, Kim DK, Zhang Y. New multi-layered zirconias: Composition, microstructure and translucency. Dent Mater 2019;35:797-806. https://doi.org/10.1016/j.dental.2019.02.017
- International Organization for Standardization. ISO 6872:2015 Dentistry - ceramic materials. Available from: https://www.iso.org/standard/59936.html (updated 2021 Sep 6).
- ASTM International. ASTM F394-78 (1996), Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001). West Conshohocken; PA; 1996.
- International commission on illumination. CIE S 017-2011. International lighting vocabulary. Vienna, Austria:CIE. Available from: http://cie.co.at (updated 2015 Nov 16).
- Japanese Standards Association. JIS Z 8113-1998. Lighting vocabulary. Tokyo, Japan: Japanese Standards Association. Available from: http://www.jsa.or.jp (updated 2015 Nov 16).
- Seo DG, Roh BD. The comparison of relative reliability on biaxial and three point flexural strength testing methods of light curing composite resin. J Korean Acad Cons Dent 2006;31:58-65. https://doi.org/10.5395/JKACD.2006.31.1.058
- Anusavice KJ, Kakar K, Ferree N. Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramicbased dental prostheses? Clin Oral Implants Res 2007;18:218-31. https://doi.org/10.1111/j.1600-0501.2007.01460.x
- Wille S, Zumstrull P, Kaidas V, Jessen LK, Kern M. Low temperature degradation of single layers of multilayered zirconia in comparison to conventional unshaded zirconia: Phase transformation and flexural strength. J Mech Behav Biomed Mater 2018;77:171-5. https://doi.org/10.1016/j.jmbbm.2017.09.010
- Xie H, Gu Y, Li Q, Qian M, Zhang F, Tay FR, Chen C. Effects of multiple firings on the low-temperature degradation of dental yttria-stabilized tetragonal zirconia. J Prosthet Dent 2016;115:495-500. https://doi.org/10.1016/j.prosdent.2015.08.029
- Nakamura K, Adolfsson E, Milleding P, Kanno T, Ortengren U. Influence of grain size and veneer firing process on the flexural strength of zirconia ceramics. Eur J Oral Sci 2012;120:249-54. https://doi.org/10.1111/j.1600-0722.2012.00958.x
- Chevalier J. What future for zirconia as a biomaterial? Biomaterials 2006;27:535-43. https://doi.org/10.1016/j.biomaterials.2005.07.034
- Brodbelt RH, O'Brien WJ, Fan PL. Translucency of dental porcelains. J Dent Res 1980;59:70-5. https://doi.org/10.1177/00220345800590011101
- Johnston WM, Reisbick MH. Color and translucency changes during and after curing of esthetic restorative materials. Dent Mater 1997;13:89-97. https://doi.org/10.1016/S0109-5641(97)80017-6
- Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent 2013;110:14-20. https://doi.org/10.1016/S0022-3913(13)60333-9
- Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent 2015;113:534-40. https://doi.org/10.1016/j.prosdent.2014.12.003
- Harada K, Raigrodski AJ, Chung KH, Flinn BD, Dogan S, Mancl LA. A comparative evaluation of the translucency of zirconias and lithium disilicate for monolithic restorations. J Prosthet Dent 2016;116:257-63. https://doi.org/10.1016/j.prosdent.2015.11.019
- Spink LS, Rungruanganut P, Megremis S, Kelly JR. Comparison of an absolute and surrogate measure of relative translucency in dental ceramics. Dent Mater 2013;29:702-7. https://doi.org/10.1016/j.dental.2013.03.021
- Nassary Zadeh P, Lumkemann N, Sener B, Eichberger M, Stawarczyk B. Flexural strength, fracture toughness, and translucency of cubic/tetragonal zirconia materials. J Prosthet Dent 2018;120:948-54. https://doi.org/10.1016/j.prosdent.2017.12.021
- Camposilvan E, Leone R, Gremillard L, Sorrentino R, Zarone F, Ferrari M, Chevalier J. Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications. Dent Mater 2018;34:879-90. https://doi.org/10.1016/j.dental.2018.03.006
- Inokoshi M, Shimizu H, Nozaki K, Takagaki T, Yoshihara K, Nagaoka N, Zhang F, Vleugels J, Van Meerbeek B, Minakuchi S. Crystallographic and morphological analysis of sandblasted highly translucent dental zirconia. Dent Mater 2018;34:508-18. https://doi.org/10.1016/j.dental.2017.12.008
- Cho MS, Lee YK, Lim BS, Lim YJ. Changes in optical properties of enamel porcelain after repeated external staining. J Prosthet Dent 2006;95:437-43. https://doi.org/10.1016/j.prosdent.2006.04.002
- Lai X, Si W, Jiang D, Sun T, Shao L, Deng B. Effects of small-grit grinding and glazing on mechanical behaviors and ageing resistance of a supertranslucent dental zirconia. J Dent 2017;66:23-31. https://doi.org/10.1016/j.jdent.2017.09.003
- Sulaiman TA, Abdulmajeed AA, Donovan TE, Vallittu PK, Narhi TO, Lassila LV. The effect of staining and vacuum sintering on optical and mechanical properties of partially and fully stabilized monolithic zirconia. Dent Mater J 2015;34:605-10. https://doi.org/10.4012/dmj.2015-054