Earthquakes and Structures

  • 제21권3호
  • /
  • Pages.239-250
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Base-isolated steel structure with spring limiters under near-fault earthquakes: Experiment

  • Han, Miao (Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture) ;
  • Wang, Yuandong (The Dennis Group) ;
  • Du, Hongkai (Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture) ;
  • Chu, Xiangyang (Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture) ;
  • Cui, Mingzhu (Hefei University of Technology) ;
  • Meng, Lingshuai (China State Decoration Group Co. Ltd.)
  • 투고 : 2021.03.07
  • 심사 : 2021.08.07
  • 발행 : 2021.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The seismic performance of a steel frame base-isolated structure with steel spiral spring limiters is experimentally investigated under near-fault ground motions. A series of shake table simulator tests are carried out to analyze the dynamic response of isolation layer and superstructure. The test setup consists of a one-eighth scale five-story steel frame with steel spiral spring limiters that are designed and modeled in different parameters and stiffness, as well as various reserved gap sizes between the testing structure and limiters. The main output parameters are the maximum deformation at the isolation level, the maximum vertical force of isolation bearings, and inter-story drift. The results further reveal the seismic impact on the isolation layer and superstructure dynamic response caused by the limiter stiffness and reserved gap size.

키워드

과제정보

This research was funded by the China National Key R&D Program during the 13th Five-year Plan Period (Grnat No. 2019YFC1509500) and Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture (Grant No. UDC2019032424).

참고문헌

  1. Aiken, I., Kelly, J. and Tajirian, F. (1989), "Mechanics of low shape factor elastomeric seismic isolation bearings", Report No. UCB/EERC-89/13, University of California, Berkeley, U.S.A.
  2. Alhan, C. and O ncu-Davas, S. (2016), "Performance limits of seismically isolated buildings under near-field earthquakes". Eng. Struct., 116, 83-94. https://doi.org/10.1016/j.engstruct.2016.02.043
  3. Amiri, G., Shakouri, A., Veismoradi, S. (2017), "Effect of seismic pounding on building isolated by triple friction pendulum bearing." Earthq. Struct., 12(1), 35-45. https://doi.org/10.12989/eas.2017.12.1.035
  4. Andreaus, U., Baragatti, P., De Angelis, M and Perno, S. (2017), "Shaking table tests and numerical investigation of two-sided damping constraint for end-stop impact protection", Nonlinear Dyn., 90(4), 2387-2421. https://doi.org/10.1007/s11071-017-3810-9
  5. China Shipbuilding NDRI Engineering Co. (1986), Isolation Design Handbook. China Building Industry Press, Beijing, China.
  6. Deng, K., Pan, P. and Wang, C. (2013), "Development of crawler steel damper for bridges", J. Construct. Steel Res., 85, 140-150. https://doi.org/10.1016/j.jcsr.2013.03.009
  7. Du, H., Han, M. and Yan, W. (2014), "Study on the calculation method of mechanical characteristics for constrained U-shaped steel plates", China Civil Eng. J., 47(S2), 158-163.
  8. Gazi, H. and Alhan, C. (2019), "Reliability of elastomeric-isolated buildings under historical earthquakes with/without forwarddirectivity effects". Eng. Struct., 195, 490-507. https://doi.org/10.1016/j.engstruct.2019.05.081
  9. GB 50011-2010 (2011), Code for Seismic Design of Buildings. China Architect Building Press, Beijing, China.
  10. GB707-88 (1988), Hot-Rolled Channel Steel-Dimensions, Shape, Weight and Tolerances. China Architect Building Press, Beijing, China.
  11. Guerrein, L. and Azevedo, J. (1996), "Impact problems on base-isolated structures", Proceedings of 11th World Conference of Earthquake Engineering, Acapulco, Mexico.
  12. Han, M., Li, X. and Du, H. (2008), "Testing Study on Isolating Soft-Collision Limiting Displacement", Proceedings of 14th World Conference Earthquake Engineering, Beijing, China.
  13. Han, M., Wang, Y., Du, H., Cui, X. (2021), "Mechanical property of U-Shaped 65Mn steel bumpers for seismic base isolation", Earthq. Eng. Eng. Vibr., Accepted. https://doi.org/10.1016/j.jcsr.2013.03.009
  14. Ibarra, L. and Krawinkler, H. (2005), "Global collapse of frame structures under seismic excitations", Report No. 29-51. Pacific Earthquake Engineering Research Center, Berkeley, CA, U.S.A.
  15. Masroor, A. and Mosqueda, G. (2012), "Experimental simulation of base-isolated buildings pounding against moat wall and effects on superstructure response", Earthq. Eng. Struct. Dyn., 41(14), 2093-2109. https://doi.org/10.1002/eqe.2177.
  16. Masroor, A. and Mosqueda, G. (2012), "Impact model for simulation of base isolated buildings impacting flexible moat walls", Earthq. Eng. Structural Dyn., 42(3), 357-376. https://doi.org/10.1002/eqe.2210.
  17. Matsagar, V.A. and Jangid, R.S. (2003), "Seismic response of base-isolated structures during impact with adjacent structures", Eng. Struct., 25(10), 1311-1323. https://doi.org/10.1016/S0141-0296(03)00081-6.
  18. Matsagar, V.A. and Jangid, R.S. (2010), "Impact response of torsionally coupled base-isolated structures", J. Vibr. Control, 16(11), 1623-1649. https://doi.org/10.1177/1077546309103271.
  19. Mazza, F. (2019), "Effects of the long-term behaviour of isolation devices on the seismic response of base-isolated buildings", Struct. Control Health, 26(4), e2331. https://doi.org/10.1002/stc.2331.
  20. Mazza, F. (2021a), "Base-isolation of a hospital pavilion against in-plane-out-of-plane seismic collapse of masonry infills", Eng. Struct., 228, 111504. https://doi.org/10.1016/j.engstruct.2020.111504.
  21. Mazza, F. and Labernarda, R. (2020), "Magnetic damped links to reduce internal seismic pounding in base-isolated buildings", Bull. Earthq. Eng., 18(15), 6795-6824. https://doi.org/10.1007/s10518-020-00961-6
  22. Mazza, F. and Labernarda, R. (2021b), "Internal pounding between structural parts of seismically isolated buildings", J. Earthq. Eng., 1-29. https://doi.org/10.1080/13632469.2020.1866122.
  23. Mazza, F., Mazza, M. and Vulcano, A. (2017), "Nonlinear response of rc framed buildings retrofitted by different base-isolation systems under horizontal and vertical components of near-fault earthquakes", Earthq. Struct., 12(1), 135-144. https://doi.org/10.12989/eas.2017.12.1.135
  24. Pant, D.R. and Wijeyewickrema, A.C. (2012), "Structural performance of a base-isolated reinforced concrete building subjected to seismic pounding", Earthq. Eng. Struct. Dyn., 41(12), 1709-1716. https://doi.org/10.1002/eqe.2158
  25. Pavlidou, C. and Komodromos, P. (2020). "Peak seismic response of a symmetric base-isolated steel building: near vs. far fault excitations and varying incident angle", Earthq. Struct., 18(3), 349-365. https://doi.org/10.12989/eas.2020.18.3.349.
  26. Polycarpou, P.C., Komodromos, P. and Polycarpou, A.C. (2013), "A nonlinear impact model for simulating the use of rubber shock absorbers for mitigating the effects of structural pounding during earthquakes", Earthq. Eng. Struct. Dyn., 42(1), 81-100. https://doi.org/10.1002/eqe.2194
  27. Sarebanhaa, A., Mosquedaa, G., Kimb, M.K. and Kimc, J.H. (2018), "Seismic response of base isolated nuclear power plants considering impact to moat walls", Nuclear Eng. Design, 328, 58-72. https://doi.org/10.1016/j.nucengdes.2017.12.021.
  28. Skinner, R.I., Robinson, W.H. and Mcvery, G.H. (1993), An Introduction to Seismic Isolation. John Wiley Sons Ltd.
  29. Tagawa, H. and Gao, J. (2012), "Evaluation of vibration control system with U-dampers based on quasi-linear motion mechanism", J. Construct. Steel Res., 70, 213-225. https://doi.org/10.1016/j.jcsr.2011.09.004
  30. Tornello, M.E. and Sarrazin M. (2012), "Base-isolated building with high-damping spring system subjected to near fault earthquakes", Earthq. Struct., 3(3-4), 315-340. https://doi.org/10.12989/eas.2012.3.3_4.315
  31. Wang, Y. and Ibarra, L. (2015), "Seismically optimization of modified base-isolated systems for next generation nuclear structures", Proceedings of 23rd International Conf Struct Mechanics Reactor Technology, Manchester, United Kingdom.
  32. Wang, Y., Ibarra, L. and Pantelides, C. (2019), "Collapse capacity of reinforced concrete skewed bridges retrofitted with buckling-restrained braces", Eng. Struct. 18, 99-114. https://doi.org/10.1016/j.engstruct.2019.01.033.
  33. Xie, X., Chen, S.X. and Zhou, X. (2018), "A simplified analytical model for U-shaped steel dampers considering horizontal bidirectional deformation", Bull. Earthq. Eng., 16(12), 6243-6268. https://doi.org/10.1007/s10518-018-0407-8
  34. Ye, K., Li, L. and Zhu, H. (2009), "A modified Kelvin impact model for pounding simulation of base-isolated building with adjacent structures", Earthq. Eng. Eng. Vibr., 8(3): 433-446. https://doi.org/10.1007/s11803-009-8045-4
  35. Zhou, X., Yan, W. and Yang, R. (2002), "Isolation, damper, and vibration control of building structures". J. Build. Struct., 2, 2-12. https://doi.org/10.1016/j.engstruct.2016.02.043.