Earthquakes and Structures

  • 제21권3호
  • /
  • Pages.277-289
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic performance assessment of code-conforming precast reinforced concrete frames in China

  • Wang, Zhun (Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, National and Local Joint Engineering Research Center for Intelligent Construction and Maintenance) ;
  • Feng, De-Cheng (Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, National and Local Joint Engineering Research Center for Intelligent Construction and Maintenance) ;
  • Cao, Xuyang (Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, National and Local Joint Engineering Research Center for Intelligent Construction and Maintenance) ;
  • Wu, Gang (Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, National and Local Joint Engineering Research Center for Intelligent Construction and Maintenance)
  • 투고 : 2019.10.10
  • 심사 : 2021.07.06
  • 발행 : 2021.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Precast reinforced concrete (RC) frames have been rapidly developed in structural engineering due to their various advantages, such as high efficiency and low environmental pollution. However, the construction quality of precast RC frames is difficult to guarantee, and the interface of new and old concrete and the bond-slip effects of additional steel bars may lead to different performance levels of precast RC frames. Therefore, it is necessary and important to investigate and assess the seismic performance of precast RC frames that adopt the conformation of Chinese code. In this paper, a numerical simulation method for precast RC frames is developed based on OpenSEES software, in which the Joint2D element is used to simulate the beam-to-column connections to consider the shear and bond-slip effects. Two prototype structures of precast RC frames are designed, and the nonlinear time history analysis is performed to explore the seismic performance of the precast RC frames according to the Chinese code. Meanwhile, the incremental dynamic analysis and fragility analysis are conducted to study the differences in seismic performance and collapse resistance between precast RC frames and cast-in-situ RC frames.

키워드

과제정보

The authors sincerely appreciate the financial supports by the Natural Science Foundation of China (Grant Nos. 51838004, 52078119, 51708106), the National Key Research and Development Program of China (Grant No. 2020YFC1511900), Key Special Project of "Technology Boosts Economy 2020" of National Key Research and Development Program(Grant No. SQ2020YFF0426587), Fundamental Research Funds for the Central University (Grant No. 2242021k30010) and Postgraduate Research & Practice Innovation Program of Jiangsu Province (Grant No. KYCX18_0121).

참고문헌

  1. Alcocer, S.M., Carranza, R., Perez-Navarrete, D. and Martinez, R. (2002), "Seismic tests of beam-to-column connections in a precast concrete frame", Pci. J., 47(3), 70-89. https://doi.org/10.15554/pcij.05012002.70.89
  2. Altoontash, A. (2004), "Simulation and damage models for performance assessment of reinforced concrete beam-column joints", Ph.D., Stanford University.
  3. American Society of Civil Engineers (2013)," Minimum design loads for buildings and other structures",Reston.
  4. Bahrami, S., Madhkhan, M., Shirmohammadi, F. and Nazemi, N. (2017)," Behavior of two new moment resisting precast beam to column connections subjected to lateral loading", Eng. Struct., 132, 808-821. https://doi.org/10.1016/j.engstruct.2016.11.060
  5. Bao, Y., Kunnath, S.K., El-Tawil, S. and Lew, H.S. (2008), "Macromodel-based simulation of progressive collapse: Rc frame structures", J. Struct. Eng., 134(7), 1079-1091. https://doi.org/10.1061/(asce)0733-9445(2008)134:7(1079)
  6. Beilic, D., Casotto, C., Nascimbene, R., Cicola, D. and Rodrigues, D. (2017), "Seismic fragility curves of single storey rc precast structures by comparing different italian codes", Earthq. Struct., 12(3), 359-374. https://doi.org/10.12989/eas.2017.12.3.359
  7. Belleri, A., Brunesi, E., Nascimbene, R., Pagani, M. and Riva, P. (2014)," Seismic performance of precast industrial facilities following major earthquakes in the italian territory", J. Perform. Constr. Fac., 29(5), 4014135.
  8. Bertero, V.V. (1977), "Strength and deformation capacities of buildings under extreme environments", Struct. Eng. Struct. Mech., 53(1), 29-79.
  9. Brunesi, E., Nascimbene, R., Bolognini, D. and Bellotti, D. (2015), "Experimental investigation of the cyclic response of reinforced precast concrete framed structures", PCI J., 60(2), 57-79. https://doi.org/10.15554/pcij.03012015.57.79
  10. Brunesi, E., Nascimbene, R., Pagani, M. and Beilic, D. (2014), "Seismic performance of storage steel tanks during the May 2012 emilia, Italy, earthquakes", J. Perform. Constr. Fac., 29(5), 4014137.
  11. Building Seismic Safety Council (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Washington, D.C.
  12. Building Seismic Safety Council (2009), Quantification of Building Seismic Performance Factors, Washington, D.C.
  13. Celik, O.C. and Ellingwood, B.R. (2010), "Seismic fragilities for non-ductile reinforced concrete frames-role of aleatoric and epistemic uncertainties", Struct. Saf., 32(1), 1-12. https://doi.org/10.1016/j.strusafe.2009.04.003
  14. Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002), "Probabilistic basis for 2000 sac federal emergency management agency steel moment frame guidelines", J. Struct. Eng., 128(4), 526-533. https://doi.org/10.1061/(asce)0733-9445(2002)128:4(526)
  15. Feng, D. and Li, J. (2016)," Stochastic nonlinear behavior of reinforced concrete frames. Ii: numerical simulation", J. Struct. Eng., 142(040151633)
  16. Feng, D. and Ren, X. (2017)," Enriched force-based frame element with evolutionary plastic hinge", J. Struct. Eng., 143(0601700510)
  17. Feng, D., Kolay, C., Ricles, J. M. and Li, J. (2016)," Collapse simulation of reinforced concrete frame structures", Struct. Des. Tall Spec., 25(12), 578-601. https://doi.org/10.1002/tal.1273
  18. Feng, D., Ren, X. and Li, J. (2016), "Implicit gradient delocalization method for force-based frame element", J. Struct. Eng., 142(040151222)
  19. Feng, D., Wu, G. and Lu, Y. (2018), "Finite element modelling approach for precast reinforced concrete beam-to-column connections under cyclic loading", Eng. Struct., 174, 49-66. https://doi.org/10.1016/j.engstruct.2018.07.055
  20. Feng, D., Wu, G. and Lu, Y. (2018), "Numerical investigation on the progressive collapse behavior of precast reinforced concrete frame subassemblages", J. Perform. Construct. Fac., 32(3), 40180273.
  21. Feng, D., Wu, G., Sun, Z. and Xu, J. (2017), "A flexure-shear timoshenko fiber beam element based on softened damageplasticity model", Eng. Struct., 140, 483-497. https://doi.org/10.1016/j.engstruct.2017.02.066
  22. Feng, D., Xie, S., Deng, W. and Ding, Z. (2019), "Probabilistic failure analysis of reinforced concrete beam-column subassemblage under column removal scenario", Eng. Fail. Anal., 100, 381-392. https://doi.org/10.1016/j.engfailanal.2019.02.004
  23. Feng, D.C., Wang, Z. and Wu, G. (2019), "Progressive collapse performance analysis of precast reinforced concrete structures", Struct. Des. Tall Spec. Build., e1588. https://doi.org/10.1002/tal.1588
  24. Ha, S., Kim, S., Lee, M.S. and Moon, J. (2014), "Performance evaluation of semi precast concrete beam-column connections with u-shaped strands", Advan. Struct. Eng., 17(11), 1585-1600. https://doi.org/10.1260/1369-4332.17.11.1585
  25. Hsu, T. (1988), "Softened truss model-theory for shear and torsion", Aci. Struct. J., 85(6), 624-635.
  26. Jamnani, H.H., Abdollahzadeh, G. and Faghihmaleki, H. (2017), "Seismic fragility analysis of improved RC frames using different types of bracing", J. Eng. Sci. Technol., 12(4), 913-934.
  27. Jeon, J., DesRoches, R., Brilakis, I. and Lowes, L.N. (2012), "Modeling and fragility analysis of non-ductile reinforced concrete buildings in low-to-moderate seismic zones", Struct. Congress, 2012, 2199-2210.
  28. Kaya, M. and Arslan, A.S. (2009), "Analytical modeling of post-tensioned precast beam-to-column connections", Mater. Des., 30(9), 3802-3811. https://doi.org/10.1016/j.matdes.2009.01.033
  29. Kent, D. C. and Park, R. (1971)," Flexural members with confined concrete", Journal of the Structural Division, 97(7), 1969-1990. https://doi.org/10.1061/JSDEAG.0002957
  30. Lowes, L.N. and Altoontash, A. (2003), "Modeling reinforced-concrete beam-column joints subjected to cyclic loading", J. Struct. Eng. ASCE, 129(12), 1686-1697. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1686)
  31. Lu, X., Ye, L., Pan, P., Zhao, Z. and Ji, X. (2012), "Pseudo-static collapse experiments and numerical prediction competition of RC frame structure i: RC frame experiment", Build. Struct., 11, 19-22, 26.
  32. Mazzotta, V., Brunesi, E. and Nascimbene, R. (2017), "Numerical modeling and seismic analysis of tall steel buildings with braced frame systems", Periodica Polytechnica Civil Eng., 61(2), 196-208.
  33. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded RC Plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending", Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads.
  34. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2010), Code for Design of Concrete Structures, Beijing.
  35. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2010), Code for Seismic Design of Buildings, Beijing.
  36. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2010), Technical Specification for Concrete Structures of tall Building, Beijing.
  37. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2010), Technical Specification for Framed Structures Comprised of Precast Prestressed Conctete Components, Beijing.
  38. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2011), Code for Construction of Concrete Structures, Beijing.
  39. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2014), Technical Specification for Precast Concrete Structure, Beijing.
  40. Mitra, N. and Lowes, L.N. (2007), "Evaluation, calibration and verification of a reinforced concrete beam-column joint model", J. Struct. Eng., 133(1), 105-120. https://doi.org/10.1061/(asce)0733-9445(2007)133:1(105)
  41. Nagashree, B.K., Ravi, K. and Venkat, R.D. (2016), "A parametric study on seismic fragility analysis of rc buildings", Earthq. Struct., 10(3), 629-643. https://doi.org/10.12989/eas.2016.10.3.629
  42. Nastri, E., Vergato, M. and Latour, M. (2017), "Performance evaluation of a seismic retrofitted rc precast industrial building", Earthq. Struct., 12(1), 13-21. https://doi.org/10.12989/eas.2017.12.1.013
  43. O'Reilly, G.J. and Sullivan, T.J. (2016), "Fragility functions for eccentrically braced steel frame structures", Earthq. Struct., 10(2), 367-388. https://doi.org/10.12989/eas.2016.10.2.367
  44. Pacific Earthquake Engineering Research Center (2011), Peer Ground Motion Database, University of California Berkeley.
  45. Ramamoorthy, S.K., Gardoni, P. and Bracci, J.M. (2006), "Probabilistic demand models and fragility curves for reinforced concrete frames", J. Struct. Eng., 132(10), 1563-1572. https://doi.org/10.1061/(asce)0733-9445(2006)132:10(1563)
  46. Scott, B.D., Park, R. and Priestley, M. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high-strain rates", J. American Concrete Institute, 79(1), 13-27.
  47. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996), "Fibre beam-column model for non-linear analysis of RC frames: Part i. Formulation", Earthq. Eng. Struct. D., 25(7), 711-726. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9
  48. Vamvatsikos, D. and Cornell, C.A. (2004), "Applied incremental dynamic analysis", Earthq. Spectra, 20(2), 523-553. https://doi.org/10.1193/1.1737737
  49. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression-field theory for reinforced concrete elements subjected to shear", ACI J., 83(2), 219-231.
  50. Yang, Z., Lu, J. and Elgamal, A. (2008), "Opensees soil models and solid-fluid fully coupled elements", User's Manual. Ver, 1, 27.
  51. Yassin, M. and Hisham, M. (1994), "Nonlinear analysis of prestressed concrete structures under monotonic and cyclic loads", Ph.D., University of California, Berkeley.