Earthquakes and Structures

  • 제21권3호
  • /
  • Pages.291-301
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mathematical model and results for seismic responses of a nonlinear isolation system

  • Li, Shanshan (School of Civil Engineering, Central South University) ;
  • Xiang, Ping (School of Civil Engineering, Central South University) ;
  • Wei, Biao (School of Civil Engineering, Central South University) ;
  • Tan, Hao (School of Civil Engineering, Central South University) ;
  • Fu, Yunji (School of Civil Engineering, Central South University)
  • 투고 : 2019.10.05
  • 심사 : 2021.07.21
  • 발행 : 2021.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The friction and viscous damping actions always cause nonlinear responses of a seismic isolation system under earthquakes. Their influence on the seismic responses needs investigation in detail. In order to analyze the effects of nonlinear phenomenon on the seismic isolation system, a mathematical model was built for such a nonlinear isolation system, and the nonlinear responses were calculated and analyzed. The numerical results indicate that an appropriate combination of spring, Coulomb friction and viscous damper is able to achieve an optimal seismic performance. The stiffness and natural period of system are significantly influenced by the friction action. Both the friction action and the viscous damping action can dissipate earthquake energy, and the optimal value of one depends on the value of the other in the seismic isolation system. All of the values of spring, Coulomb friction and viscous damper should be accurately evaluated before the design of seismic isolation system.

키워드

과제정보

This research is jointly supported by the National Natural Science Foundations of China under grant No. 51778635, U1934207 and 51978667, the Natural Science Foundations of Hunan Province under grant No. 2019JJ40386 and the Innovation-driven Plan in Central South University under grant No. 20200017050004. The above support is greatly appreciated.

참고문헌

  1. Chung, L.L., Kao, P.S., Yang, C.Y., Wu, L.Y. and Chen, H.M. (2015), "Optimal frictional coefficient of structural isolation system", J. Vib. Control, 21(3), 525-538. http://doi.org/10.1177/1077546313487938
  2. Guerreiro, L., Azevedo, J. and Muhr, A.H. (2007), "Seismic tests and numerical modeling of a rolling-ball isolation system", J. Earthq. Eng., 11(1), 49-66. http://doi.org/10.1080/13632460601123172
  3. Harvey, P.S. and Gavin, H.P. (2014), "Double rolling isolation systems: a mathematical model and experimental validation", Int. J. Nonlin. Mech., 61, 80-92. https://doi.org/10.1016/j.ijnonlinmec.2014.01.011
  4. Ismail, M., Rodellar, J. and Pozo, F. (2015), "Passive and hybrid mitigation of potential near-fault inner pounding of a self-braking seismic isolator", Soil Dyn. Earthq. Eng., 69, 233-250. http://doi.org/10.1016/j.ijnonlinmec.2014.01.011.
  5. Jangid, R.S. (2000), "Stochastic seismic response of structures isolated by rolling rods", Eng. Struct., 22(8), 937-946. http://doi.org/10.1016/j.soildyn.2014.10.019.
  6. Jangid, R.S. and Londhe, Y.B. (1998), "Effectiveness of elliptical rolling rods for base isolation", J. Struct. Eng., 124(4), 469-472. http://doi.org/10.1016/S0141-0296(99)00041-3.
  7. Kurita, K., Aoki, S., Nakanishi, Y., Tominaga, K. and Kanazawa, M. (2011), "Fundamental characteristics of reduction system for seismic response using friction force", J. Civ. Eng. Arch., 5(11), 1042-1047.
  8. Lee, G.C., Ou, Y.C., Niu, T.C., Song, J.W. and Liang, Z. (2010), "Characterization of a roller seismic isolation bearing with supplemental energy dissipation for highway bridges", J. Struct. Eng., 136(5), 502-510. http://doi.org/10.17265/1934-7359/2011.11.010.
  9. Lei, X.M., Sun, L.M. and Xia, Y. (2021) "Lost data reconstruction for structural health monitoring using deep convolutional generative adversarial networks", Struct. Health Monit., 20(4), 2069-2087. https://doi.org/10.1177%2F1475921720959226. https://doi.org/10.1177%2F1475921720959226
  10. Li, S.S., Wei, B., Tan, H., Li, C.B. and Zhao, X.M. (2021), "Equivalence of friction and viscous damping in a springfriction system with concave friction distributio", J. Testing Evaluat., https://doi.org/10.1520/JTE20190885
  11. Monfared, H., Shirvani, A. and Nwaubani, S. (2013), "An investigation into the seismic base isolation from practical perspective", Int. J. Civil Struct. Eng., 3(3), 451-463.
  12. Nanda, R.P., Agarwal, P. and Shrikhande, M. (2012), "Base isolation system suitable for masonry buildings", Asian J. Civ. Eng. (Building and Housing),13, 195-202. http://doi.org/10.1038/sj.emboj.7601012.
  13. Ortiz, N.A., Magluta, C. and Roitman, N. (2015), "Numerical and experimental studies of a building with roller seismic isolation bearings", Struct. Eng. Mech., 54(3), 475-489. https://doi.org/10.12989/sem.2015.54.3.475
  14. Ou, Y.C., Song, J.W. and Lee, G.C. (2010), "A parametric study of seismic behavior of roller seismic isolation bearings for highway bridges", Earthq. Eng. Struct. Dyn., 39(5), 541-559. https://doi.org/10.1002/eqe.958
  15. Shakeri, K., Tarbali, K. and Mohebbi, M. (2012), "An adaptive modal pushover procedure for asymmetric-plan buildings", Eng. Struct., 36, 160-172. http://doi.org/10.1002/eqe.958.
  16. Siringoringo, D.M and Fujino Y. (2015), "Seismic response analyses of an asymmetric base-isolated building during the 2011 Great East Japan (Tohoku) Earthquake", Struct. Control Health Monit., 22, 71-90. https://doi.org/10.1002/stc.1661.
  17. Wei, B., Hu, Z.L., He, X.H. and Jiang L.Z. (2021), "System-based probabilistic evaluation of longitudinal seismic control for a cable-stayed bridge with three super-tall towers", Eng. Struct., 229. https://doi.org/10.1016/j.engstruct.2020. 111586.
  18. Wei, B., Wang, P., He, X.H. and Jiang, L.Z. (2018), "Seismic isolation characteristics of a friction system", J. Testing Evaluat., 46(4), 1411-1420. http://doi.org/10.1520/JTE20160598.
  19. Wei, B., Wang, W.H., Wang, P., Yang, T.H., Jiang, L.Z. and Wang, T. (2020), "Seismic responses of a high-speed railway (HSR) bridge and track simulation under longitudinal earthquakes", J. Earthq. Eng., https://doi.org/ 10.1080/13632469.2020.1832937.
  20. Wu, S. (2019), "Unseating mechanism of a skew bridge with seat-type abutments and a simplified method for estimating its support length requirement", Eng. Struct., 191, 194-205. http://doi.org/10.1016/j.engstruct.2019.04.059.
  21. Wu, S. and Buckle, I.G. (2020), "Effect of skew on the minimum support length requirements of single-span bridges with seattype abutments", Earthq. Spectra, 36(3), 1119-1140. http://doi.org/10.1177/8755293020919427.