사물인터넷융복합논문지 (Journal of Internet of Things and Convergence)

한국사물인터넷학회 (The Korea Internet of Things Society)
권호 표지
DOI QR코드

DOI QR Code

선박연료 가열용 250KW급 판형 IoT 전기히터의 기초연구

Basic Study on 250KW-class IoT Electric Heater for Ship Fuel Heating

  • 장성철 (한국폴리텍IV대학 충주캠퍼스 지능형기계과)
  • 투고 : 2021.07.19
  • 심사 : 2021.09.04
  • 발행 : 2021.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

국내의 전기히터 제조업체에서는 기존 제품의 효율을 향상시키는 기술 개발에 집중하고 있다. 선박 연료용 전기히터는 그 크기가 크고 소형화/고효율화에 대한 난이도가 높아 아직까지 기술개발을 시도하는 기업은 많지 않은 실정이다. 기존의 전기히터는 선박 엔진 연료의 유동경로가 단조롭기 때문에 가열매체의 열교환 튜브와의 접촉시간이 매우 짧아 가열 효율이 낮은 구조이며, 관형으로 제작되어 있기 때문에 가열효율과 무관하게 부피가 매우 크게 제작되므로 가열장치의 설치공간을 확보해야 한다. 이로인해 해외 선진사에서 적용하고 있는 관형 전기히터 장치는 내부의 특정부분이 손상되었을때 관형 가열기를 모두 분해하여야 하고, 열교환 튜브가 손상된 경우에는 열교환 튜브를 모두 분해해야 하므로 유지와 보수에 어려움이 있다. 본 연구에서는 250kW 용량급 판형 전기히터 가열기를 통해 시간당 10ton의 선박 엔진 연료를 가열할 수 있고, 최대온도를 150℃까지 설정할 수 있는 판형 전기히터에 대한 기초연구를 수행하였다.

Domestic electric heater manufacturers are focusing on technology development to improve the efficiency of existing products. The electric heater for ship fuel is large in size and has high difficulty in miniaturization/high efficiency, so there are not many companies that try to develop technology yet. The existing electric heater has a structure of low heating efficiency because the contact time with the heat exchange tube of the heating medium is very short because the flow path of the ship engine fuel is monotonous. Since it is manufactured in a tubular shape, the volume is very large regardless of the heating efficiency. As a result, the tubular electric heater device applied by overseas advanced companies has difficulty in maintaining and repairing because it is necessary to decompose all tubular heaters when a specific part of the inside is damaged and if the heat exchange tube is damaged, all the heat exchange tubes must be decomposed. In this study, a basic study on plate type electric heaters capable of heating 10 tons of ship engine fuel per hour and setting a maximum temperature of up to 150℃ was conducted through a 250kW capacity plate type electric heater.

키워드

과제정보

본 연구는 지역특화산업육성과제(S3007077)에 의해 수행된 과제이며 관계자 여러분께 감사함을 전합니다.

참고문헌

  1. R. R., Antos, D. Zanoelo, and M. Morbidelli, "Experimental and modeling analysis of the NOx OUT process", Chem. Eng. SCI., Vol. 57, No. 1, pp. 27-38, 2002. https://doi.org/10.1016/S0009-2509(01)00367-0
  2. P. M. Schaber, J. Colson, S. Dietz, "Study of the urea thermal decomposition (pyrolysis) reaction and importance to cyanuric acid production", Am. Lab., pp. 13-21, 1999.
  3. W. G. Park, S. C. Jang, S. W. Lee, "Development of SCR Catalyst Unit Integral Duct Burner", KSPSE, 2020 Spring Conference, pp. 67-68, 2020.
  4. F. Menter and T. Esch, "Elements of Industrial Heat Transfer Predictions," 16th Bazilian Congress of Mechanical Engineering (COBEM), Uberlandia, Brazil. 2001.
  5. D. W. Lee, K. M Cho, S. H. Lee, "Analysis on Smart Factory in IoT Environment", Journal of The Korea Internet of Things Society, Vol. 5, No. 2, pp.1-6, 2019. https://doi.org/10.20465/KIOTS.2019.5.2.001
  6. K. H. Lee, "A Scheme for Information Protection using Blockchain in IoT Environment", Journal of The Korea Internet of Things Society, Vol. 5, No. 2, pp. 33-40, 2019. https://doi.org/10.20465/KIOTS.2019.5.2.033
  7. J. H, Lim and K. H. Lee, "Simplified Forensic Analysis Using List of Deleted Files in IoT Environment," Journal of The Korea Internet of Things Society, Vol. 5, No. 1, pp. 35-39, 2019. https://doi.org/10.20465/KIOTS.2019.5.1.035
  8. K. H.Lee, "A Scheme on Anomaly Prevention for Systems in IoT Environment", Journal of The Korea Internet of Things Society, Vol. 5, No. 2, pp. 95-101, 2019. https://doi.org/10.20465/KIOTS.2019.5.2.095
  9. K. B. Jang, "A study on IoT platform for private electrical facilities management", Journal of The Korea Internet of Things Society, Vol. 5, No. 2, pp. 103-110, 2019. https://doi.org/10.20465/KIOTS.2019.5.2.103
  10. D. H. Kim, G.W.Seo, D.J.Jang and H.Kim, "A Study on the development of smart food trash box using IoT technology", Korea Information Science Society Winter Conference, pp.86-88, 2016.
  11. S. C. Jang, S. M. Han, C. K. Lee, & H. C. Jung"FSI Analysis of Pneumatic Actuator", KSPSE Spring Conference, pp. 81-83, 2016.
  12. S. C. Jang, H. D. Cho, and N. K. Kim, "Development of Gear Type Vane Damper Change Link Type in FD Fan, "KSMTE, Vol. 13, No. 1, pp. 104-109. 2000.
  13. S. C. Jang, S. H. Han. and J. W. Kim, "A Study on Performance Improvement of Gear Type Vane Damper in FD Fan(Productivity Increases & Construction Improvement)" KSMTE J. Vol. 19, No.1, pp. 134-139. 2010.
  14. C. S. Yi, J. K. Hong, J. S. Suh, Y. I. Shin, and Y. S. Park, 2009, "Effect of Cutoff Angle on the Flow Characteristic of Turbo-Fan", Conference Proceedings of KSME Spring Annual Meeting(KSME 09TE068), pp. 311-318. 2015.
  15. B. E. Launde and D. B. Spalding, "The numerical computational of turbulence flows", Computational methods in applied mechanics and engineering, Vol.3, pp.269-289, 2020.