DOI QR코드

DOI QR Code

Optimal Design of Passenger Airbag Door System Considering the Tearseam Failure Strength

티어심 파손 강도를 고려한 동승석 에어백 도어시스템의 최적 설계

  • 최환영 (한국기술교육대학교 기계설계공학과) ;
  • 공병석 (현대자동차 인테리어리서치랩) ;
  • 박동규 (한국기술교육대학교 기전융합공학과)
  • Received : 2021.03.18
  • Accepted : 2021.08.08
  • Published : 2021.09.30

Abstract

Invisible passenger airbag door system of hard panel types must be designed with a weakened area such that the side airbag will deploy through the instrument panel as like intended manner, with no flying debris at any required operating temperature. At the same time, there must be no cracking or sharp edges in the head impact test. If the advanced airbag with the big difference between high and low deployment pressure ranges are applied to hard panel types of invisible passenger airbag (IPAB) door system, it becomes more difficult to optimize the tearseam strength for satisfying deployment and head impact performance simultaneously. It was introduced the 'Operating Window' idea from quality engineering to design the hard panel types of IPAB door system applied to the advanced airbag for optimal deployment and head impact performance. Zigzab airbag folding and 'n' type PAB mounting bracket were selected.

Keywords

Acknowledgement

This research was supported by the Education and Research Promotion Program of KOREATECH in 2021.

References

  1. Axel, M., Dirk, F. and Heinz-Dieter, A., 1998, "Dual-stage inflators and OOP occupants-A performance study", SAE 982325.
  2. Thomas, G., Venkat, N. and Robert, S. T., 1999, "A predictive design methodology for active top pads during airbag deployment", SAE 1999-01-0688.
  3. Kumar, B. K., Scott, D. K. and Ravi, S. T., 1997, "Using CAE to guide passenger airbag door design for optimal head impact performance", SAE 970772.
  4. B. S. Kong, and D. K. Park, 2019, "Invisible PAB door development using two-shot molding", Int. J. Automotive Technology, Vol. 20, No. 2, pp. 221~225. https://doi.org/10.1007/s12239-019-0021-z
  5. B. S. Kong, and D. K. Park, 2018, "Design optimization of the cowl cross bar-light cowl cross bar satisfying 5 performances", Int. J. Automotive Technology, Vol. 19, No. 3, pp. 387~391. https://doi.org/10.1007/s12239-018-0037-9
  6. Xinran, X., 2002, "Plastic material modeling for FMVSS 201 simulation", SAE 2002-01-0385.
  7. Joseph, T. W. and Gerald, G. T., 1999, "Material characterization for predicting impact performance of plastic parts", SAE 1999-01-3178.
  8. Venkat, N. and Thomas, G., 1999, "Material characterization and FEA correlation for engineering thermoplastics under high strain loading", SAE 1999-01-3175.
  9. Simon, X. H., 1997, "Advanced finite element analysis in the structural design of airbag modules", SAE 970773.
  10. Jaya, D., 2001, "Modeling methodology of tearseams for invisible PSIR systems", SAE 2001-01-0314.
  11. Padraig, N., 1999, "Extension of material models and finite element techniques to improve the simulation of high speed impact of thermoplastic materials", SAE 1999-01-0300.
  12. Christopher, L. C. and Deborah, J. L., 1996, "High strain rate testing of engineer thermoplastics for head impact applications", SAE 960153.
  13. Dan, W., Jaya, D. and Sanjay, P., 2001, "Predicting material processing degradation", SAE 2001-01-1273.
  14. Thomas, G., 2000, "Materials modeling for engineering thermoplastics in FEA under high-strain loading", SAE 2000-01-1167.
  15. B. S. Kong, J. G. Park, and J. S. Bae, 2004, "Invisible advanced passenger-side airbag door design for optimal deployment and head impact performance", SAE 2004-01-0850.