Structural Engineering and Mechanics

  • 제79권6호
  • /
  • Pages.779-789
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Development of a lattice model for predicting nonlinear torsional behavior of RC beams

  • Jeong, Yeongseok (Department of Civil Engineering, Gyeongsang National University) ;
  • Kwon, Minho (Department of Civil Engineering, Gyeongsang National University) ;
  • Kim, Jinsup (Department of Civil Engineering, Gyeongsang National University)
  • 투고 : 2020.04.21
  • 심사 : 2021.08.18
  • 발행 : 2021.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Seismic design criteria based on performance of structures have recently been adopted by practicing engineers in response to destructive earthquakes. A simple but efficient structural-analysis tool capable of predicting both strength and ductility is needed to analyze reinforced concrete (RC) structures subjected to such events. Hence, a three-dimensional lattice model is developed in this study to analyze torsions in high-strength RC beams. Optimization techniques for determining optimal variables in each lattice model are introduced. Pure torsion tests of RC beams were performed to use to propose a three-dimensional lattice model. The experimental test results of pure torsion on RC beam specimens were used to compare with numerical results obtained using the proposed model. Then, the proposed model was also compared to 3D solid model in commercial finite element analysis program, ABAQUS. Correlation studies between the numerical and experimental results confirm that the proposed model is well capable of representing salient features of the experimental results. Furthermore, the proposed model provides better predicted displacement corresponding to peak load. than the result from ABAQUS.

키워드

과제정보

This research was supported by a grant (21IFIP-B128598-05) from Industrial Facilities & Infrastructure Research Program (IFIP) funded by Ministry of Land, Infrastructure and Transport of Korean government.

참고문헌

  1. Ahmad, S.I. and Tanabe, T.A. (2012), "Three dimensional FE analysis reinforced concrete structures using lattice equivalent continuum method", Struct. Concrete, 14(1), 51-59. https://doi.org/10.1002/suco.201100009.
  2. American Concrete Institute (2012), Building Code Requirements for Reinforced Concrete (ACI 318), Farmington Hills, Michigan, USA.
  3. Anagnostopoulos, S.A., Kyrkos, M.T. and Stathopoulos, K.G. (2015), "Earthquake induced Torsion in buildings:critical review and state of the art", Earthq. Struct., 8(2), 305-377. http://doi.org/10.12989/eas.2015.8.2.305.
  4. Bernardo Luis, F.A., Taborda Catia, S.B. and Gama Jorge, M.R. (2015), "Parametric analysis and Torsion design charts for axially restrained RC beams", Struct. Eng. Mech., 55(1), 1-27. http://doi.org/10.12989/sem.2015.55.1.001.
  5. Chen, J.W. and Zhou, X.P. (2019), "The enhanced extended finite element method for the propagation of complex branched cracks", Eng. Anal. Bound. Elem., 104, 46-62. https://doi.org/10.1016/j.enganabound.2019.03.028.
  6. Chen, S., Ye, Y., Guo, Q., Cheng, S. and Diao, B. (2016), "Nonlinear model to predict the Torsional response of U-shaped thin-walled RC members", Struct. Eng. Mech., 60(6), 1039-1061. http://dx.doi.org/10.12989/sem.2016.60.6.1039.
  7. Cho, C.G., Ha, G.J. and Kim, Y.Y. (2008), "Nonlinear model of reinforced concrete frames retrofitted by in-filled HPFRCC walls", Struct. Eng. Mech., 30(2), 211-223. http://doi.org/10.12989/sem.2008.30.2.211.
  8. Clough, R. and Johnston, S. (1966), "Effect of stiffness degradation on earthquake ductility requirements", Proceedings of Japan Earthquake Engineering Symposium.
  9. El-Behairy, F.M. and Tanabe, T.A. (1997), "A new technique for reinforced concrete beam analysis using the Modified Lattice Model", Proc. JPN Concrete Inst., 19(2), 477-482.
  10. Giberson, M. (1967), "The response of nonlinear multi-story structures subjected to earthquake excitations", Earthquake Engineering Research Laboratory, Pasadena.
  11. Gunneswara Rao, T.D. and Rama Seshu, D. (2003), "Torsion of steel fiber reinforced concrete members", Cement Concrete Res., 33, 1783-1788. https://doi.org/10.1016/S0008-8846(03)00174-1.
  12. Gunneswara Rao, T.D. and Rama Seshu, D. (2006), "Torsional response of fibrous reinforced concrete members: Effect of single type of reinforcement", Constr. Build. Mater., 20, 187-192. https://doi.org/10.1016/j.conbuildmat.2005.01.017.
  13. Hsu, T.T.C. (1968), "Torsion of structural concrete-interaction surface for combined torsion, shear and bending in beams without stirrups", ACI Struct. J., 65(1), 51-60.
  14. Karsan, I.D. and Jirsa, J.O. (1969), "Behavior of concrete under compressive loadings", J. Struct. Div., ASCE, 95(ST12), 2543-2563. https://doi.org/10.1061/JSDEAG.0002424.
  15. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Eng., ASCE, 97(ST7), 1969-1990. https://doi.org/10.1061/JSDEAG.0002957.
  16. Kim, J., Kwon, M., Jung, W. and Limkatanyu, S. (2013), "Seismic performance evaluation of RC columns reinforced by GFRP composite sheets with clip connectors", Constr. Build. Mater., 43, 563-574. https://doi.org/10.1016/j.conbuildmat.2013.02.023.
  17. Kim, J., Lim, J., Jung, Y. and Kwon, M. (2018), "Seismic fragility evaluation of retaining wall by 2d finite element analysis", J. Korean Soc. Adv. Compos. Struct. 9(3), 21-27. (in Korean) https://doi.org/10.11004/kosacs.2018.9.3.021
  18. Kwon, M., Cho, C.G., Kim, J. and Spacone, E. (2015), "Nonlinear lattice-based model for cyclic analysis of reinforced normal and high-strength concrete columns", Adv. Struct. Eng., 18(7), 1017-1027. https://doi.org/10.1260/1369-4332.18.7.1017.
  19. Kwon, M., Shing, P., Mallare, C. and Restrepo, J. (2011), "Seismic resistance of rc bent caps in elevated mass transit structures", Earthq. Spectra, 27(1), 67-88. https://doi.org/10.1193/1.3533471.
  20. Lee, J. and Fenvas, G.L. (1998), "Plastic-damaged model for cyclic loading of concrete structures", J. Eng. Mech., 124, 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).
  21. Lilliu, G. and van Mier, J.G.M. (2003), "3D Lattice type fracture model for concrete", Eng. Fract. Mech., 70(7/8), 927-942. https://doi.org/10.1016/S0013-7944(02)00158-3.
  22. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  23. Mansur, M.A. and Paramasivam, P. (1985), "Fiber reinforced concrete beams in torsion, bending, and shear", ACI Struct. J., 82(1), 33-39.
  24. Meyer, C., Roufaiel, M.S. and Arzoumanidis, S.G. (1983), "Analysis of damaged concrete frames for cyclic loads", Earthq. Eng. Struct. Dyn., 11, 207-228. https://doi.org/10.1002/eqe.4290110205.
  25. Mohammadnejad, M. (2015), "New analytical approach for determination of flexural, axial and torsional natural frequencies of beams", Struct. Eng. Mech., 55(3), 655-674. http://doi.org/10.12989/sem.2015.55.3.655.
  26. Mohd-Yassin, M.H. (1994), "Nonlinear analysis of prestressed concrete structures under monotonic and cyclic loads", Ph. D. Thesis, Dept. of Civil Eng., UC, Berkeley.
  27. Narayanan, R. and Toorani-Goloosalar, Z. (1979), "Fibre reinforced concrete in pure torsion and combined bending and torsion", Proc. Inst. Civil Eng., 67(4), 987-1001. https://doi.org/10.1680/iicep.1979.2786.
  28. Otani, S. (1974), "Inelastic analysis of R/C frame structures", J. Struct. Eng., ASCE, 100(ST7), 1433-1449. https://doi.org/10.1061/JSDEAG.0003821.
  29. Peng, X.N. and Wong, Y.L. (2011), "Behavior of reinforced concrete walls subjected to monotonic pure torsion-An experimental study", Eng. Struct., 33(9), 2495-2508. https://doi.org/10.1016/j.engstruct.2011.04.022.
  30. Schlaich, J., Schaefer, K. and Jennewein, M. (1987), "Towards a consistent design of structural concrete", J. Prestres. Concrete Inst., 32, 74-150.
  31. Schlangen, E. and van Mier, J.G.M. (1992), "Shear fracture in cementitious composites, Part II: Numerical simulations", Ed. Z.P. Bazant, Fracture Mechanics of Concrete Structures (Proc., FraMCoS-1), London.
  32. Sheikh, S.A. and Uzumeri, S.M. (1982), "Analytical model for concrete confinement in tied columns", J. Struct. Div., ASCE, 108(ST12), 2703-2722. https://doi.org/10.1061/JSDEAG.0006100.
  33. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996), "Fibre beam-column model for nonlinear analysis of R/C frames: Part I. formulation", Earthq. Eng. Struct. Dyn., 25, 711-725. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9.
  34. Tanabe, T.A. and Ishtiaq, A.S. (2001), "Development of lattice equivalent continuum model for analysis of cyclic behavior of reinforced concrete", ASCE Special Publication on Modeling of Inelastic Behavior of RC Structures under Seismic Loads, 297-314.
  35. Tjhin, T.N. and Kuchma, D.A. (2002), "Computer-based tools for design by strut-and-tie method: Advances and challenges", ACI Struct. J., 99(5), 586-594.
  36. Tomohiro, M. (2004), "Nonlinear analysis of reinforced concrete structures subjected to seismic loads by using three-dimensional lattice model", Ph. D. Thesis, Department of Civil Eng., Tokyo Institute of Technology, Tokyo, Japan.
  37. Tomohiro, M. and Junichiro, N. (2004), "Nonlinear analysis of RC structural members using 3-D Lattice Model", J. Adv. Concrete Technol., 2(3), 343-358. https://doi.org/10.3151/jact.2.343.
  38. van Mier, J.G.M., Vervuurt, A. and Schlangen, E. (1994), "Boundary and size effects in uniaxial tensile tests: a numerical and experimental study", Fracture and Damage in Quasi-brittle Structures, London, 289-302.
  39. Wang, Q., Qiu, W. and Zhang, Z. (2015), "Torsion strength of single-box multi-cell concrete box girder subjected to combined action of shear and torsion", Struct. Eng. Mech., 55(5), 953-964. http://doi.org/10.12989/sem.2015.55.5.953.
  40. Yoon, K., Kim, D.N. and Lee, P.S. (2017), "Nonlinear torsional analysis of 3D composite beams using the extended St. Venant solution", Struct. Eng. Mech., 62(1), 33-42. http://doi.org/10.12989/sem.2017.62.1.033.
  41. Yun, Y.M. (2000), "Nonlinear strut-tie model approach for structural concrete", ACI Struct. J., 97(4), 581-590.
  42. Zhou, X., Jia, Z. and Wang, L. (2021), "A field-enriched finite element method for brittle fracture in rocks subjected to mixed mode loading", Eng. Anal. Bound. Elem., 129, 105-124. https://doi.org/10.1016/j.enganabound.2021.04.023.
  43. Zhou, X.P., Chen, J.W. and Berto, F. (2020), "XFEM based node scheme for the frictional contact crack problem", Comput. Struct., 231, 106221. https://doi.org/10.1016/j.compstruc.2020.106221.
  44. Zhou, X.P., Fu, L. and Qian, Q.H. (2020), "A 2D novel non-local lattice bond model for initiation and propagation of cracks in rock materials", Eng. Anal. Bound. Elem., 126, 181-199. https://doi.org/10.1016/j.enganabound.2021.03.002.