DOI QR코드

DOI QR Code

Flexural behaviors assessment of Hidden boundary Rib precast concrete Slab (HRS) with bi-tensional prestress: Experiments, analyses, and formulations

  • 투고 : 2020.01.22
  • 심사 : 2021.07.28
  • 발행 : 2021.09.25

초록

This study presents overviews of a first proposed Hidden boundary one-way Rib precast concrete Slab, so-called HRS. In order to investigate bending behaviors of the novel structural system, three specimens manufactured in factory are tested by corresponding static loading protocol experiments. Four-points bending tests in both cases of the presence and absence of topping concrete slabs are performed. Results of the experiment scrutinize how each structural component such as rebars, topping concretes, strand wires can affect the bending behavior of HRS. As regards the main originality of this paper, approximate equations showing flexural strengths for a partially prestressed concrete flagged section, like HRS, are proposed in accordance with several current global and local design standards such as ACI 318, EN: Eurocode 2, PCI, AASHTO 2002, KCI 2012 and CSA A.23. Moreover, this study provides another predicting approach using finite element analysis of MIDAS FEA for analytical performances of specimens. Through these experimental and analytical results, the general characteristic of HRS may be observed and studied for realization in the field of prestressed precast concrete industries for construction.

키워드

과제정보

This research is sincerely supported by IS Dongseo research project in 2018. Sincerely we appreciate for the support.

참고문헌

  1. AASHTO (2002), Standard Specifications for Highway Bridges, 17th Edition, American Association of State Highway and Transportation Officials, Washington, DC.
  2. ACI Committee 318 (1977), Building Code Requirements for Reinforced Concrete (ACI 318-77), American Concrete Institute, Detroit, MI, USA.
  3. ACI Committee 318 (1983), Building Code Requirements for Reinforced Concrete (ACI 318-83), American Concrete Institute, Detroit, MI, USA.
  4. ACI Committee 318 (2011), Building Code Requirements for Structural Concrete And Commentary, American Concrete Institute; Farmington Hills, MI, USA.
  5. Ahn, J.H, Jung, C.Y. and Kim, S.H. (2010), "Evaluation on structural behaviors of prestressed composite beams using external prestressing member", Struct. Eng. Mech., 34(2), 247-275. https://doi.org/10.12989/sem.2010.34.2.247.
  6. Alnuaimi, A.S. (2007), "Direct design of partially prestressed concrete solid beams", Struct. Eng. Mech., 27(6), 741-771. https://doi.org/10.12989/sem.2007.27.6.741.
  7. Amadeo, B.C., Jesus, D.A. and Elena, O.S. (2018), "Seismic performance and damage evaluation of a waffle-flat plate structure with hysteretic dampers through shake-table tests", Earthq. Eng. Struct. Dyn., 47(5), 1250-1269. https://doi.org/10.1002/eqe.3016.
  8. Brasov (2012), "Applicability of displacement controlled fatigue test methods for compliant structures", IMEKO TC15-Experimental Mechanics-Proceedings of 11th Youth Symposium on Experimental Solid Mechanics, Romania, May-June.
  9. CSA A23.3-14 (2014), Design of Concrete Structures, Canadian Standards Association, Mississauga, Ontario, Canada.
  10. Erberik, M.A. and Elnashai, A.S. (2004), "Fragility analysis of flatslab structures", Eng. Struct., 26(7), 937-948. https://doi.org/10.1016/j.engstruct.2004.02.012.
  11. Harajli, M.H. and Naaman, A.E. (1985), "Evaluation of the ultimate steel stress in partially prestressed flexural members", PCI J., 30(5), 54-81. http://dx.doi.org/10.4334/JKCI.2016.28.1.003.
  12. Hwang, S.B., Seo, S.Y., Lee, K.C. and Lee, S.H. (2016), "Flexural capacity of precast concrete triple ribs slab", J. Korea Concrete Inst., 28(1), 3-11. http://doi.org/10.4334/JKCI.2016.28.1.003.
  13. KCI (2012), Explanation of Concrete Structural Design Standard, Korea Concrete Institute, Korea.
  14. Lee, D.H. and Kim, K.S. (2011), "Flexural strength of prestressed concrete members with unbonded tendons", Struct. Eng. Mech., 38(5), 675-696. https://doi.org/10.12989/sem.2011.38.5.675.
  15. Lee, S.S. and Park, K.S. (2010), "Evaluation for horizontal shear strength of precast concrete slab with the inverted rib" J. Arch. Inst. Korea Struct. Constr., 26(1), 29-36. https://doi.org/10.11112/jksmi.2011.15.6.156.
  16. Mattock, A.H. (1984), "Modification of ACT code equation for stress in bonded prestressed reinforcement at flexural uitimate", ACI J., 81(4), 331-339.
  17. McCormac, J.C. and Brown, R.H. (2015), Design of Reinforced Concrete, 10th Edition, Clemson University, South Carolina, USA.
  18. McGregor, J.G. (1984), Special Study for the Canadian Code, Private Communication.
  19. MIDAS IT Co., Ltd. (2000), http://en.midasuser.com.
  20. Naaman, A.E (1981), "A proposal to extend some code provisions on reinforcement to partial prestressing", PCI J., 26(2), 74-91. https://doi.org/10.15554/pcij.03011981.74.91
  21. Nguyen, P.A., Kim, J.H., Oh, J.H., Park Y.S., Lee, S.J. and Lee, D.K. (2021), "Push-over bending and shear behavior assessments of hidden boundary void precast concrete slab with bi-tensional prestress", Smart Struct. Syst., 27(6), 927-942. http://doi.org/10.12989/sss.2021.27.6.927.
  22. Nilson, A.H. (2007), Quantitative Chemical Analysis, 7th Edition, W.H. Freeman and Company, New York, NY, USA.
  23. Park, J.H. (2015), "Prediction of stress in high-strength strand at flexural strength of PSC beam", Ph.D. Dissertation, Seoul National University, Seoul, Korea.
  24. Park, J.W., Kim, C.H. and Yang, S.C. (2003), "Ultimate strength of ribbed slab composite beams with web openings", J. Struct. Eng., 129(6), 966-996. https://doi.10.1061/(ASCE)0733-9445(2003)129:6(810).
  25. PCI (2004), PCI Design Handbook-Precast and Prestressed Concrete, 6th Edition, Precast/Prestressed Concrete Institute, Chicago, IL, USA.
  26. Qiao, W.T., Wang, D. and Zhao, M.S. (2017), "Mechanical features of cable-supported ribbed beam composite slab structure", Steel Compos. Struct., 25(5), 523-534. https://doi.org/10.12989/scs.2017.25.5.523.
  27. Sacramento, P.V.P., Picanco, M.S. and Oliveira, D.R.C. (2018), "Reinforced concrete ribbed slabs with wide-beam", Rev. IBRACON Struct. Mater., 11(5), 810-817. http://doi.org/10.1590/s1983-41952018000500005.
  28. Souza, S.S.M. and Oliveira, D.R.C. (2011), "Reinforced concrete waffle flat slabs under shearing", IBRACON Struct. Mater. J., 4(4), 610-641. http://doi.org/10.1590/S1983-41952011000400007.
  29. Thorenfeldt, E., Tomaszewicz, A. and Jensen, J.J. (1987), "Mechanical properties of high-strength concrete and application in design", Proceedings of the Symposium Utilization of High-Strength Concrete, Tapir, Trondheim.
  30. Warwaruk, J., Sozen, M.A. and Siess, C.P. (1962), "Investigation of prestresssed concrete for highway bridges, Part III: Strength and behavior in flexure of prestressed concrete beam", Bulletin No. 464, Engineering Experiment Station; University of Illinois, Urbana.
  31. Wu, Y. and Peng, K. (2018), "Finite element-smeared crack combined algorithm based bridge corbel analysis", IOP Conference Series: Earth and Environmental Science, 189(2), 022017. https://doi.org/10.1088/1755-1315/189/2/022017.
  32. Xia, Y., Chen, L., Ma, H. and Su, D. (2019), "Experimental and numerical study on shear studs connecting steel girder and precast concrete deck", Struct. Eng. Mech., 71(4), 433-444. https://doi.org/10.12989/sem.2019.71.4.433.
  33. Yang, Y. (2007), Long-Span Spatial Structure, Technical Code for Monitoring of Building Structures, Springer, Singapore.
  34. Yasin, O.O., Sakir, Y., Ceyhun, A., Musa, H.A. and Lokman, G. (2021), "Numerical investigation of the parameters influencing the behavior of dapped end prefabricated concrete purlins with and without CFRP strengthening", Constr. Build. Mater., 275(15), 122173, https://doi.org/10.1016/j.conbuildmat.2020.122173
  35. Zhang, C., Duan, P., Zheng, B. and Li, M. (2018), "Numerical analysis of diaphragm fatigue of reinforced concrete simply supported T-beams", J. Eng. Sci. Tech. Rev., 11(5), 193-201. https://doi.10.25103/jestr.115.25.
  36. Zhang, D. and Fleischman, R. (2019), "Verification of diaphragm seismic design factors for precast concrete parking structures", Struct. Eng. Mech., 71(6), 643-656. https://doi.org/10.12989/sem.2019.71.6.643.