DOI QR코드

DOI QR Code

A time-domain method for analyzing the ship roll stabilization based on active fin control

  • Patil, Neha (Department of Ocean Engineering, Indian Institute of Technology) ;
  • Rajendran, Suresh (Department of Ocean Engineering, Indian Institute of Technology)
  • Received : 2021.04.17
  • Accepted : 2021.08.19
  • Published : 2021.09.25

Abstract

The present work focuses on the development of a numerical body nonlinear time-domain method for estimating the effect of active roll fin stabilizers on ship roll motion in both regular and irregular seaway. The time-domain analysis aims at providing fast and accurate ship responses that will be useful during the design process through accurate estimation of the environmental loads. A strip theory-based approach is followed where the Froude-Krylov and hydrostatic forces are calculated for the exact wetted surface area for every time step. The equations of motions are formulated in the body frame and consider the six degrees of coupled motions. The active fin, rudder, and propeller modules are included in the simulation. This leads to accurate modeling of the system dynamics. The numerical unstabilized roll motion is validated with experimental seakeeping simulations conducted on a Coastal Research Vessel (CRV). The phenomena of Parametric Rolling (PR) is identified during the numerical investigation of the candidate vessel. Besides, a nonlinear PID (NPID) control technique and LQR method is implemented for active roll motion control and its performance is observed in regular as well as irregular waves. The proposed numerical approach proves to be an effective and realistic method in evaluating the 6-DoF coupled ship motion responses.

Keywords

Acknowledgement

We are extremely thankful to Prof. Anantha Subramanian for the experimental setup and data.

References

  1. Bertram, V., Veelo, B., Soding, H. and Graf, K/ (2006), "Development of a freely available strip method for seakeeping", In COMPIT, 6, 356-368.
  2. Bhattacharyya, R. (1978), "Dynamic of marine vehicles", John Wiley & Sons, New York.
  3. Carletti, C., Gasparri, A., Ippoliti, G., Longhi, S., Orlando, G. and Raspa, P. (2010), "Roll damping and heading control of a marine vessel by fins-rudder VSC", IFAC Proceedings, 43(20), 34-39.
  4. Cox G.G. and Lloyd, A.R. (1977), "Hydrodynamic design basis for navy ship roll motion stabilization", Presented at the Annual Meeting, New York.
  5. Dallinga, R.P. (1993), "Hydromechanic Aspects of the Design of Fin Stabilisers", RINA Spring Meetings.
  6. Dalzell, J.F. (1962), "Application of cross bispectral analysis to ship resistance in waves", Stevens Institute of Technology, Hoboken, New Jersey, May.
  7. Dubey, A.C. and Subramanian, V.A. (2017), "Wi-Fi enabled autonomous ship model tests for ship motion dynamics and seakeeping assessment", IIRE J. Maritime Res. Develop., 1(2).
  8. El Moctar, O., Ley, J., Oberhagemann, J. and Schellin, T.E. (2017), "Nonlinear computational methods for hydrodynamic effects of ships in extreme seas", Ocean Eng., 130, 659-673. https://doi.org/10.1016/j.oceaneng.2016.11.037
  9. Fonseca, N. and Guedes Soares, C. (1998), "Time-domain analysis of large-amplitude vertical ship motions and wave loads", J. Ship Res., 42(2),139-152. https://doi.org/10.5957/jsr.1998.42.2.139
  10. Fossen, T.I. (1994), "Guidance and Control of Ocean Vehicles", John Wiley & Sons.
  11. Gaillarde G. (2002), "Dynamic behaviour and operational limits of stabiliser fins", IMAM, Creta.
  12. Greco, M., Lugni, C. and Faltinsen, O.M. (2015), "Influence of motion coupling and nonlinear effects on parametric roll for a floating production storage and offloading platform", Philos. T. R. Soc. A, 373, 20140110. https://doi.org/10.1098/rsta.2014.0110
  13. Ikeda, Y., Himeno, Y. and Tanaka, N. (1978), "A prediction method for ship roll damping", Technical Report, University of Osaka Prefecture, Osaka.
  14. Kazantzidou, C., Perez, T., Donaire, A. and Valentinis, F. (2018), "Internal model control for rudder roll stabilization and course keeping of a surface marine craft", IFAC-Papers on Line, 51(29), 457-462.
  15. Kim, Y., Kim, K., Kim, J., Kim, T., Seo, M. and Kim, Y. (2011), "Time-domain analysis of nonlinear motion responses and structural loads on ships and offshore structures: development of WISH programs", Int. J. Naval Archit. Ocean Eng., 3(1), 37-52. https://doi.org/10.3744/JNAOE.2011.3.1.037
  16. Kring, D., Huang, Y., Scalavounos, P., Vada, T. and Braathen, A. (1997), "Nonlinear ship motions and wave induced loads by a Rankine method", Proceedings of the 21st symposium naval hydrodynamics.
  17. Lavieri, R.S., Getschko, N. and Tannuri, E.A. (2012), "Roll stabilization control system by sliding mode", IFAC Proceedings, 45(27), 447-452.
  18. Lee, S., Rhee, K.P. and Choi, J.W. (2011), "Design of the roll stabilization controller, using fin stabilizers and pod propellers", Appl. Ocean Res., 33(4), 229-239. https://doi.org/10.1016/j.apor.2011.07.005
  19. Li, R., Li, T., Bai, W. and Du, X. (2016), "An adaptive neural network approach for ship roll stabilization via fin control", Neurocomput., 173, 953-957. https://doi.org/10.1016/j.neucom.2015.08.050
  20. Lloyd, A.R.J.M. (1975), "Roll stabilizer fins: A design procedure", R. Instit. Nav. Architects, suppl. Papers; G.B., 117, 233-254.
  21. Mikami, T. and Shimada, K. (2006), "Time-domain strip method with memory-effect function considering the body non-linearity of ships in large waves", J. Mar. Sci. Technol., 11(3).
  22. Oberhagemann, J. (2016), On Prediction of Wave-Induced Loads and Vibration of Ship Structures with Finite Volume Fluid Dynamic Methods, University of Duisburg-Essen, Duisburg. Doctoral Thesis.
  23. Perez, T. and Blanke, M. (2011), "Ship roll damping control", Annu. Rev. Control, 36(1), 129-147. https://doi.org/10.1016/j.arcontrol.2012.03.010
  24. Perez, T. and Goodwin, G.C. (2008), "Constrained predictive control of ship fin stabilizers to prevent dynamic stall", Control Eng. Practice, 16(4), 482-494. https://doi.org/10.1016/j.conengprac.2006.02.016
  25. Rajendran, S. and Guedes Soares, C. (2017), "Numerical investigation of parametric rolling of a container ship in regular and irregular waves", Proceedings of the ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers Digital Collection.
  26. Rajendran, S., Fonseca, N. and Guedes Soares, C. (2016), "Body nonlinear time domain calculation of vertical ship responses in extreme seas accounting for 2nd order Froude-Krylov pressure", Appl. Ocean Res., 54, 39-52. https://doi.org/10.1016/j.apor.2015.10.008
  27. Salvensen, N., Tuck, E.O. and Faltinsen, O. (1970), "Ship motions and sea loads".
  28. Sgobbo, J.N. and Parsons, M.G. (1999), "Rudder/fin roll stabilization of the USCG WMEC 901 class vessel", Marine Technology and SNAME news 36.3.
  29. Skejic, R. and Faltinsen, O.M. (2008), "A unified seakeeping and maneuvering analysis of ships in regular waves", J. Mar. Sci. Technol., 13(4), 371-394. https://doi.org/10.1007/s00773-008-0025-2
  30. Somayajula, A.S. and Falzarano, J.M., (2015), "Validation of volterra series approach for modelling parametric rolling of ships", Proceedings of the 34th International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2015-41528.
  31. Subramanian, R., Jyothish, P.V. and Subramanian, V.A. (2020), "Genetic algorithm based design optimization of a passive anti-roll tank in a sea going vessel", Ocean Eng., 203, 107216. https://doi.org/10.1016/j.oceaneng.2020.107216
  32. Tian, Y., Tade, M.O. and Tang, J. (1999), "A nonlinear PID controller with applications", IFAC Proceedings, 32(2), 2657-2661.
  33. Turk, A. (2012), "Coupled nonlinear parametric resonance model for container ships", Doctoral dissertation. University of Rijeka, Croatia
  34. Zhang, S., Zhao, P. and Liang, L. (2018), "LQR-based ship roll reduction control using fin stabilizer", Proceedings of the 2018 IEEE International Conference on Mechatronics and Automation (ICMA), IEEE.
  35. Zhu, D.X. and Katory, M. (1998), "A time-domain prediction method of ship motions", Ocean Eng., 25(9), 781-791. https://doi.org/10.1016/S0029-8018(97)10008-7