Structural Engineering and Mechanics

  • 제79권5호
  • /
  • Pages.601-618
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical model for the basement wall horizontally supported by flexible floor diaphragms

  • Lin, Yongjun (Department of Building Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Zhang, Xianzhao (Department of Building Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Liu, Kaiqi (Department of Building Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Xu, Wenqiang (Department of Building Engineering, School of Civil Engineering, Southwest Jiaotong University)
  • 투고 : 2020.06.15
  • 심사 : 2021.07.13
  • 발행 : 2021.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

Subterranean floors are treated as the rigid lateral support in the current practice for the basement wall design. The structural performance of the basement wall will be influenced by the floor openings, which are inevitable to satisfy building functional requirements. An analytical model for the basement wall being presented is able to analyze the effect of such opening quantitatively. The magnitude of the horizontal support stiffness is determined based on deformation analysis of the diaphragm opening area. Idealized models of the basement wall are continuous beams with various degrees of indeterminacy. The force method is used to deduce the functions for internal forces acting towards the basement wall. The proposed analytical model is verified with results derived by finite element analyses through consideration of various factors, including various numbers of stories, combinations of beam-slab sections, and percentages of floor opening dimensions. The maximum deviations on critical design sections for all prototype basement structures are less than 15.99%. Comparisons with conventional rigid support models are also performed, providing an estimation of the effect of the opening on the mechanical behavior of the basement wall.

키워드

과제정보

The authors would like to thank the financial support from the China-Indonesia Joint Research Center for High-speed Railway Technology (KY201801005) and the National Key Research and Development Program of China (2016YFC0802205). The authors also would like to thank two anonymous reviewers for their insightful comments. Their time and interest in our paper is greatly appreciated.

참고문헌

  1. ACI 318-14 (2014), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan.
  2. Afefy, H.M. and Fawzy, T.M. (2013), "Strengthening of RC one-way slabs including cut-out using different techniques", Eng. Struct., 57, 23-36. https://doi.org/10.1016/j.engstruct.2013.09.013.
  3. Al-Balhawi, A. and Zhang, B. (2019), "Investigations of elastic vibration periods of tall reinforced concrete office buildings", Wind Struct., 29(3), 209-223. https://doi.org/10.12989/was.2019.29.3.209.
  4. Anajafi, H. and Medina, R.A. (2019), "Lessons learned from evaluating the responses of instrumented buildings in the united states: The effects of supporting building characteristics on floor response spectra", Earthq. Spectra, 35(1), 159-191. https://doi.org/10.1193/081017EQS159M.
  5. ANSYS (2019), User's Manual Version 19.0, ANSYS, Inc, Pennsylvania.
  6. ASCE/SEI 7-16 (2017), Minimum Design Loads and Associated Criteria for Buildings and other Structures, American Society of Civil Engineers, Reston, Virginia.
  7. Brooks, H. and Nielsen, J.P. (2018), Basics of Retaining Wall Design, HBA Publication, Newport Beach, California.
  8. Chong, X., Xie, L., Ye, X., Jiang, Q. and Wang, D. (2020), "Experimental investigation on the mechanical behaviour of a new superimposed RC exterior basement wall with socket base", Eur. J. Environ. Civil, 24(9), 1381-1397. https://doi.org/10.1080/19648189.2018.1471008.
  9. Darwin, D., Dolan, C.W. and Nilson, A.H. (2016), Design of Concrete Structures, McGraw-Hill Education, New York.
  10. Duncan, C.I. (2012), Soils and Foundations for Architects and Engineers, Springer Science & Business Media, New York.
  11. Durucan, C. and Anil, O. (2015), "Effect of opening size and location on the punching shear behavior of interior slab-column connections strengthened with CFRP strips", Eng. Struct., 105, 22-36. https://doi.org/10.1016/j.engstruct.2015.09.033.
  12. Erler, M., Jager, W. and Kranzler, T. (2017), "Basement wall under earth pressure loading with low surcharge", Mauerwerk, 21(2), 61-81. https://doi.org/10.1002/dama.201700723.
  13. Harash, M.A. and Panahshahi, N. (2012). "Inelastic seismic response of reinforced concrete buildings with symmetric and unsymmetric floor diaphragm openings", Proceedings of the Fifthteenth World Conference on Earthquake Engineering, Lisbon, Portugal.
  14. Hegger, J., Dressen, T., Niewels, J. and Will, N. (2009), "Static system of plain concrete basement walls under earth pressure", Mag. Concrete Res., 61(10), 815-821. https://doi.org/10.1680/macr.2008.61.10.815.
  15. Hwang, S.H. and Lignos, D.G. (2017), "Earthquake-induced loss assessment of steel frame buildings with special moment frames designed in highly seismic regions", Earthq. Eng. Struct. Dyn., 46(13), 2141-2162. https://doi.org/10.1002/eqe.2898.
  16. ICC (2021), International Residential Code, International Code Council, Washington, DC.
  17. Jalla, R. (1999), "Basement wall design: Geotechnical aspects", J. Archit. Eng., 5(3), 89-91. https://doi.org/10.1061/(ASCE)1076-0431(1999)5:3(89)
  18. Ju, S.H. and Lin, M.C. (1999), "Comparison of building analyses assuming rigid or flexible floors", J. Struct. Eng., 125(1), 25-31. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(25).
  19. Keyvani, S. and Hoseini Vaez, S.R. (2019), "Using DLO procedure to investigate the effect of openings on ultimate load and collapse pattern of slabs", Struct., 20, 717-727. https://doi.org/10.1016/j.istruc.2019.06.023.
  20. Khajehdehi, R. and Panahshahi, N. (2016), "Effect of openings on in-plane structural behavior of reinforced concrete floor slabs", J. Build. Eng., 7, 1-11. https://doi.org/10.1016/j.jobe.2016.04.011.
  21. Khaloo, A.R., Masoomi, H., Nozhati, S. and Mohamadi Dehcheshmeh, M. (2016), "Influence of diaphragm opening on seismic response of rectangular RC buildings with end shear walls", Sci. Iran, 23(4), 1689-1698. https://doi.org/10.24200/sci.2016.2239.
  22. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  23. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 067-085. http://doi.org/10.12989/scs.2017.23.1.067.
  24. Lee, E.H., Luo, C., Sam, Y.L., Roberts, A.C., Kwok, K.W., Car, J., Soh, C.K. and Christopoulos, G.I. (2019), "The underground workspaces questionnaire (UWSQ): Investigating public attitudes toward working in underground spaces", Build. Environ., 153, 28-34. https://doi.org/10.1016/j.buildenv.2019.02.017.
  25. Liberati, E.A.P., Marques, M.G., Leonel, E.D., Almeida, L.C. and Trautwein, L.M. (2019), "Failure analysis of punching in reinforced concrete flat slabs with openings adjacent to the column", Eng. Struct., 182, 331-343. https://doi.org/10.1016/j.engstruct.2018.11.073.
  26. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. https://doi.org/10.12989/scs.2019.30.3.271.
  27. Mahlis, M., Shoeib, A.E., Abd Elnaby, S. and Sherif, A. (2018), "The effect of cutting openings on the behavior of two-way solid loaded slabs", Struct., 16, 137-149. https://doi.org/10.1016/j.istruc.2018.09.002.
  28. Mahmoud, K., Anand, P. and Ei-Salakawy, E. (2018), "3-D finite element modelling of prestressed hollow-core slabs strengthened with near surface mounted CFRP strips", Comput. Concrete, 21(6), 607-622. https://doi.org/10.12989/cac.2018.21.6.607.
  29. Nelson, P.P. (2016), "A framework for the future of urban underground engineering", Tunn. Undergr. Space Technol., 55, 32-39. https://doi.org/10.1016/j.tust.2015.10.023.
  30. Nie, J.G., Wang, Y.H. and Cai, C.S. (2012), "Elastic rigidity of composite beams with full width slab openings", J. Constr. Steel Res., 73, 43-54. https://doi.org/10.1016/j.jcsr.2012.01.008.
  31. Pecce, M.R., Ceroni, F. and Maddaloni, G. (2019), "In-plane deformability of RC floors: Assessment of the main parameters and influence on dynamic behaviour", Bull. Earthq. Eng., 17(1), 297-311. https://doi.org/10.1007/s10518-018-0432-7.
  32. Peng, W., Tang, Z., Wang, D., Cao, X., Dai, F. and Taciroglu, E. (2020), "A forensic investigation of the Xiaoshan ramp bridge collapse", Eng. Struct., 224, 111203. https://doi.org/10.1016/j.engstruct.2020.111203.
  33. Pytel, A. and Kiusalaas, J. (2012), Mechanics of Materials, Cengage Learning, Stamford, California.
  34. Reinhorn, A.M., Kunnath, S.K. and Panahshahi, N. (1988), Modeling of RC Building Structures with Flexible Floor Diaphragms, Buffalo, New York.
  35. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  36. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. http://doi.org/10.12989/scs.2019.31.5.427.
  37. Swamidurai, S. (2019), "Evaluation of people's willingness to use underground space using structural equation modeling-Case of Phoenix market city mall in Chennai city, India", Tunn. Undergr. Space Technol., 91, 103012. https://doi.org/10.1016/j.tust.2019.103012.
  38. Taiebat, M., Amirzehni, E. and Finn, W.D.L. (2014), "Seismic design of basement walls: evaluation of current practice in British Columbia", Can. Geotech. J., 51(9), 1004-1020. https://doi.org/10.1139/cgj-2013-0212.
  39. Tena-Colunga, A. and Abrams, D.P. (1996), "Seismic behavior of structures with flexible diaphragms", J. Struct. Eng., 122(4), 439-445. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(439).
  40. Tena-Colunga, A., Chinchilla-Portillo, K.L. and Juarez-Luna, G. (2015), "Assessment of the diaphragm condition for floor systems used in urban buildings", Eng. Struct., 93, 70-84. https://doi.org/10.1016/j.engstruct.2015.03.025.
  41. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639. https://doi.org/10.12989/sem.2019.70.5.639.