Steel and Composite Structures

  • 제40권5호
  • /
  • Pages.747-759
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Study on load distribution ratio of composite pre-tightened tooth joint by shear nonlinearity

  • Gao, Yifeng (College of Field Engineering, Army Engineering University of PLA) ;
  • Li, Fei (Department of civil engineering, Chongqing Jiaotong University) ;
  • Zhao, Qilin (College of Mechanical and Power Engineering, Nanjing University of Technology) ;
  • Gao, Jiangang (Uint 32184 of PLA) ;
  • Shi, Lin (Department of civil engineering, Chongqing Jiaotong University) ;
  • Zhao, Zhiqin (College of Field Engineering, Army Engineering University of PLA)
  • 투고 : 2020.12.01
  • 심사 : 2021.07.08
  • 발행 : 2021.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

Load distribution has a great influence on the mechanical properties of composite pre-tightened multi-tooth connection. To obtain the load distribution mechanism of composite pre-tightened multi-tooth joints, the multi-tooth joints were studied by experimental and theoretical methods. First, an experimental study was conducted on three-tooth specimens with different tooth depths and tooth lengths, and the failure mode, bearing capacity and load distribution mechanism of the specimens were obtained. Then, based on the nonlinear constitutive of interlaminar shear, an analytical model for load distribution of composite pre-tightened multi-tooth joint was proposed to research the multi-tooth load distribution mechanism. Finally, the theoretical and experimental results were compared. The research showed: (1) The theoretical results of the multi-tooth load distribution ratio were in good agreement with that of the experimental results, the maximum error between the theoretical value and the experimental value of the three-tooth joint was 17.44%, and the minimum error was only 2.35%; (2) The load distribution ratio of composite pre-tightened multi-tooth was uneven, for three-tooth joints, the values of load distribution ratio from large to small were: the first tooth, the third tooth and the second tooth.; (3) Multi-tooth load distribution ratio changed with the change of external load. The change of load distribution ratio was obvious in the early stage of loading, and tended to be gentle in the later stage of loading.

키워드

과제정보

This work was financially supported by National Science Foundation of China under Grant (No.52008390, No.11702324), Technical Field Fund for the National Defense Base strengthening program (No.2020-JCJQ-JJ-518), Chongqing Science and Technology Bureau of China (No. KJQN201900714).

참고문헌

  1. ASTM D3846-08 (2015), Standard Test Method for In-Plane Shear Strength of Reinforced Plastics, American Society of Testing Materials, ASTM International; West Conshohocken, PA, USA.
  2. Ataei, A. and Zeynalian, M. (2021), "A study on structural performance of deconstructable bolted shear connectors in composite beams", Struct., 29, 519-533. https://doi.org/10.1016/j.istruc.2020.11.065.
  3. Balaji, N.N., Chen, W. and Brake, M.R.W. (2020), "Traction-based multi-scale nonlinear dynamic modeling of bolted joints: Formulation, application, and trends in micro-scale interface evolution", Mech. Syst. Signal. Pr., 139, 106615. https://doi.org/10.1016/j.ymssp.2020.106615.
  4. Blacklock, J.R. and Richard, R.M. (1969), "Finite element analysis of inelastic structures", J. AIAA., 7(3), 432-438. https://doi.org/10.2514/3.5125.
  5. Correia, J.R., Bai, Y. and Keller, T. (2015), "A review of the fire behaviour of pultruded GFRP structural profiles for civil engineering applications", Compos. Struct., 127, 267-287. https://doi.org/10.1016/j.compstruct.2015.03.006.
  6. evolution", Mech. Syst. Signal. Pr., 139, 106615. https://doi.org/10.1016/j.ymssp.2020.106615.
  7. Feo, L., Marra, G. and Mosallam, A.S. (2012), "Stress analysis of multi-bolted joints for FRP pultruded composite structures", Compos. Struct., 94, 3769-3780. https://doi.org/10.1016/j.compstruct.2012.06.017.
  8. Gamdani, F., Boukhili, R. and Vadean, A. (2019), "Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates", J. Int. Adhes. Adhes., 95, 102426. https://doi.org/10.1016/j.ijadhadh.2019.102426.
  9. Gan, K.W., Hallett, S.R. and Wisnom, M.R. (2013), "Measurement and modelling of interlaminar shear strength enhancement under moderate through-thickness compression", Compos. Part A., 49(1), 18-25. http://dx.doi.org/10.1016/j.compositesa.2013.02.004.
  10. Gand, A.K., Chan, T.M. and Mottram, J.T. (2013), "Civil and structural engineering applications, recent trends, research and developments on pultruded fiber reinforced polymer closed sections: a review", Front. Struct. Civ. Eng., 7(3), 227-244. https://doi.org/10.1007/s11709-013-0216-8.
  11. Gao, Y.F. (2019), "Strength and failure analysis of composite pre-tightened teeth connection based on shear nonlinearity", Ph.D. Dissertation, Army Engineering of PLA, Nanjing, China.
  12. Gowtham, H.L., Pothnis, R.J., Ravikumar, G. and Naik, N.K. (2015), "Dependency of dynamic interlaminar shear strength of composites on test technique used", Polym. Test., 42, 151-159. https://doi.org/10.1016/ j.polymertesting.2015.01.012.
  13. Gunaydin, M., Adanur, S., Altunisik, A.C. and Sevim, B. (2015), "Static and dynamic responses of Halgavor Footbridge using steel and FRP materials", Steel. Compos. Struct., 18(1), 51-69. https://doi.org/10.12989/scs.2015.18.1.051.
  14. Hosseini, S.M., Mashiri, F. and Mirza, O. (2020), "Research and developments on strength and durability prediction of composite beams utilising bolted shear connectors (Review)", Eng. Fail. Anal., 117. https://doi.org/10.1016/j.engfailanal.2020.104790.
  15. Ilio, A.D., Genova, L.G.D. and Stamopoulos, A.G. (2021), "Implementation of the modified V-Notched Rail Shear method for characterizing glass fibre thermoplastic composites at sub-zero and elevated temperatures", Polym. Test., 93, 106874. https://doi.org/10.1016/j.polymertesting.2020.106874.
  16. Jadhav, S.M. and Gadade, A.M. (2019), "Micro-Mechanical Based Load Distribution in Multi Bolt Single Lap Composite Joint", Mater. Today. Proc., 16(2), 668-676. https://doi.org/10.1016/j.matpr.2019.05.144.
  17. Kim, Y.J. (2019), "State of the practice of FRP composites in highway bridges", Eng. Struct., 179, 1-8. https://doi.org/10.1016/j.engstruct.2018.10.067.
  18. Kirmse, S., Ranabhat, B. and Hsiao, K.T. (2020), "Experimental and analytical investigation on the interlaminar shear strength of carbon fiber composites reinforced with carbon nanofiber z-threads", Mater. Today. Commun., 25, 101512. https://doi.org/10.1016/j.mtcomm.2020.101512.
  19. Koerber, H., Xavier, J. and Camanho, P.P. (2010), "High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation", Mech. Mater., 42(11), 1004-1019. https://doi.org/10.1016/j.mechmat.2010.09.003.
  20. Li, F., Zhao, Q.L., Chen, H.S. and Xu, L.X. (2017), "Experimental investigation of novel pretightened teeth connection technique for composite tube", Steel. Compos. Struct., 23(2), 161-172. https://doi.org/10.12989/scs.2017.23.2.161.
  21. Mandal, B., Chakraborty, S. and Chakrabarti, A. (2018), "A hybrid approach for global sensitivity analysis of FRP composite multi-bolt joints", Compos. Struct., 208, 189-199. https://doi.org/10.1016/j.compstruct.2018.09.085.
  22. Mehrabian, M. and Boukhili, R. (2020), "Quantifying of secondary bending effect in multi-bolt single-lap carbon-epoxy composite joints via 3D-DIC", Compos. Sci. Technol., 200, 108453. https://doi.org/10.1016/j.compscitech.2020.108453.
  23. Montagne, B., Lachaud, F., Paroissien, E., Martini, D. and Congourdeau, F. (2020), "Failure analysis of single lap composite laminate bolted joints: Comparison of experimental and numerical tests", Compos. Struct., 238. https://doi.org/10.1016/j.compstruct.2020.111949.
  24. Olmedo, A. and Santiuste, C. (2012), "On the prediction of bolted single-lap composite joints", Compos. Struct., 94, 2110-2117. https://doi.org/10.1016/j.compstruct.2012.01.016.
  25. Sharos, P.A. and Mccarthy, C.T. (2020), "Novel finite element for near real-time design decisions in multi-fastener composite bolted joints under various loading rates", Compos. Struct., 240, 112005. https://doi.org/10.1016/j.compstruct.2020.112005.
  26. Taheri-Behrooz, F. and Moghaddam, H.S. (2018), "Nonlinear numerical analysis of the V-notched rail shear test specimen", Polym. Test., 65, 44-53. https://doi.org/10.1016/j.polymertesting.2017.11.008.
  27. Tao, Z., Wang, Z.B., Han, L.H. and Uy, B. (2011), "Fire performance of concrete-filled steel tubular columns strengthened by CFRP", Steel Compos. Struct., 11(4), 307-324. https://doi.org/10.12989/scs.2011.11.4.307.
  28. Votsis, R.A., Stratford, T.J., Chryssanthopoulos, M.K. and Tantele, E.A. (2017), "Dynamic assessment of a FRP suspension footbridge through field testing and finite element modelling", Steel. Compos. Struct., 23(2), 205-215. https://doi.org/10.12989/scs.2017.23.2.205.
  29. Wu, G., Yu, W., Zuo, J. and Du, S. (2020), "Experimental and theoretical investigation on mechanisms performance of the rock-coal-bolt (RCB) composite system", Int. J. Min. Sci. Tech., 30(6), 759-768. https://doi.org/10.1016/j.ijmst.2020.08.002.
  30. Xin, H., Liu, Y., He, J., Fan, H. and Zhang, Y. (2015), "Fatigue behavior of hybrid GFRP-concrete bridge decks under sagging moment", Steel. Compos. Struct., 18(4), 925-946. https://doi.org/10.12989/scs.2015.18.4.925.
  31. Yang, Y., Xue, Y.C., Yu, Y.L., Liu, R.Y. and Ke, S.F. (2017), "Study of the design and mechanical performance of a GFRP-concrete composite deck", Steel. Compos. Struct., 24(6), 679-688. https://doi.org/10.12989/scs.2017.24.6.679.
  32. Zhang, D.D., Li, F., Shao, F. and Fan, C. (2019), "Evaluation of equivalent bending stiffness by simplified theoretical solution for an FRP-aluminum deck-truss structure" KSCE J. Civ. Eng. 23(1), 367-375. https://doi.org/10.1007/s12205-018-1093-4.
  33. Zhang, D.D., Yuan, J.X., Zhao, Q.L., Li, F., Gao, Y.F., Zhu, R.J. and Zhao, Z.Q. (2020), "Static performance of a new GFRP-metal string truss bridge subjected to unsymmetrical loads", Steel. Compos. Struct., 35(5), 641-657. https://doi.org/10.12989/scs.2020.35.5.641.