과제정보
이 논문은 2021년도 산업통상자원부 및 산업기술평가관리원(KEIT) 연구비(과제번호:20000147)와 한국생산기술연구원 기관주요사업의 지원 (KITECH EO-21-0009)에 의하여 연구되었음.
참고문헌
- Atwood, R. C., Griffith, M., Harwel, L., Schlienger, E., Ensz, M., Smugeresky, J., Romero, T., Greene, D., Reckaway, D., "Laser engineered net shaping (LENSTM), a tool for direct fabrication of metal parts," Proceedings of the ICALEO 1998, Orlando, FL, USA, pp. 48-56, 1998.
- Lewis, G. K., Schlienger, E., "Practical considerations and capabilities for laser assisted direct metal deposition," Materials & Design, Vol. 21, No. 4, pp. 417-4233, 2000. https://doi.org/10.1016/S0261-3069(99)00078-3
- Hwang, J. H., Shin, S. S., Jung, G. I., Kim, S. W., Kim, H. D., "A Study on the Characteristics of Laser Deposition Surface and Cross-section for Metal Powder," Journal of Welding and Joining, Vol. 34, No. 4, pp. 17-22, 2016.
- Oh, W. J., Son, Y., Shim, D. S., "Effect of In-situ Post Heating on Repairing STS316L Built by Laser Powder Bed Fusion Using Direct Energy Deposition," Korean Journal of Metals and Materials, Vol. 57, No. 8, pp. 543-553, 2019. https://doi.org/10.3365/kjmm.2019.57.8.543
- Ahn, D. G., "Applications of Laser Assisted Metal Rapid Tooling Process to Manufacture of Molding & Forming Tools-State of the Art," International Journal of Precision Engineering and Manufacturing, Vol. 12, No. 5, pp. 925-938, 2011. https://doi.org/10.1007/s12541-011-0125-5
- Lee, C. M., Woo, W. S., Beak, J. T., Kim, E. J., "Laser and Arc Manufacturing Processes: A Review," International Journal of Precision Engineering and Manufacturing, Vol. 17, No. 7, pp. 973-985, 2016. https://doi.org/10.1007/s12541-016-0119-4
- Marya, M., Singh, V., Hascoet, J. Y., Marya, S., "A Metallurgical Investigation of the Direct Energy Deposition Surface Repair of Ferrous Alloys," Journal of Materials Engineering and Performance, Vol. 27, No. 2, pp. 813-824, 2018. https://doi.org/10.1007/s11665-017-3117-5
- Liu, Z., Jiang, Q., Cong, W., Li, T., Zhang, H. C., "Comparative study for environmental performances of traditional manufacturing and directed energy deposition processes," Internal Journal of Environmental Science and Technology, Vol. 15, pp. 2273-2282, 2018. https://doi.org/10.1007/s13762-017-1622-6
- Insstek Inc., http://www.insstek.com/
- Jo, Y. K., Yu, J. H., Jeong, H. S., Beak, G. Y., Lee, G. Y., Park, S. H., "Experimental Analysis on Multilayer Cladding Using AISI-M4/H13 Metal Powders for Enhancement of Wear Resistance and Shockproof Characteristics," Journal of the Korean Society for Precision Engineering, Vol. 36, No. 11, pp. 1059-1064, 2019. https://doi.org/10.7736/KSPE.2019.36.11.1059
- Sun, D. S., Fabijanic, D., Barr, C., Liu, Q.,Walker, K., Matthews, N., Orchowski, N., Brandt, M., "In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates," Surface and Coatings Technology, Vol. 333, pp. 210-219, 2018. https://doi.org/10.1016/j.surfcoat.2017.10.080
- Wilson, J.M., Piya, C., Shin, Y.C., Zhao, F., Ramani, K., "Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis," Journal of Cleaner Production, Vol. 80, pp. 170-178, 2014. https://doi.org/10.1016/j.jclepro.2014.05.084
- Oh, W. J., Shim, G. Y., Son, Y., Shim, D. S., "Effect of Repair Width on Mechanical Properties of 630 Stainless Steel Repaired by Direct Energy Deposition Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 3, pp. 42-50, 2020.
- Shin, S. S., Lee, J. H., Kim, S. W., Hwang, J. H., Kim, H. D., "Effect of the Laser Beam Spot Size and Process Parameters on the Cross Section of SUS316L Parts using DED(Directed Energy Deposition)," Journal of Welding and Joining, Vol. 37, No. 5, pp. 508-513, 2019. https://doi.org/10.5781/JWJ.2019.37.5.11
- Jeong, W. J., Kwon, Y. S., Kim, D. S., " Development of a Metal 3D Printer Using Laser Powder Deposition and Process Optimization for Fabricating Titanium Alloy Parts," Journal of Korean Society of Laser Processing, Vol. 18, No. 3, pp. 1-5, 2015.
- Kim, J. S., Kang, B. J., Lee, S. W., "An experimental study on microstructural characteristics and mechanical properties of stainless-steel 316L parts using directed energy deposition(DED) process," Journal of Mechanical Science and Technology, Vol. 33, No. 12, pp. 5731-5737, 2019. https://doi.org/10.1007/s12206-019-1116-1
- Fujishima, M. Oda, Y., Ashida, R., Takezawa, K., Kondo, M., "Study on factors for pores and cladding shape in the deposition provesses of Inconel 625 by the directed energy deposition(DED) method," CIRP Journal of Manufacturng Science and Technology, Vol. 19, pp. 200-204, 2017. https://doi.org/10.1016/j.cirpj.2017.04.003
- Bax, B., Rajput, R., Kellet, R., Reisacher, M., "Systematic evaluation of process parameter maps for laser cladding and directed energy deposition", Additive manufacturing, Vol. 21, pp. 487-494, 2018. https://doi.org/10.1016/j.addma.2018.04.002