Smart Structures and Systems

  • 제28권3호
  • /
  • Pages.375-390
  • /
  • 2021
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Combination of an inverse solution and an ANN for damage identification on high-rise buildings

  • Nguyen, Quy T. (Civil Engineering Department, Bursa Uludag University) ;
  • Livaoglu, Ramazan (Civil Engineering Department, Bursa Uludag University)
  • 투고 : 2020.11.25
  • 심사 : 2021.05.26
  • 발행 : 2021.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Structural health monitoring (SHM) is currently applied to control regularly the health of high-rise buildings which have deteriorated after being subjected to a sudden loading. Damage detection at element levels of a structure consisting of an enormous number of elements becomes the main objective. In this study, the complicated problem is simplified by a two-step solution. Damaged storeys are preliminarily detected before a full damage scenario at an element level is achieved. In Step 1, to overcome the issues related to the huge number of degrees of freedom (DOFs), the full building is simplified to a beam-like system using the Guyan condensation technique. As the natural characteristics of the two lowest modes at the intact and a damaged stage are obtained, the eigenvalue problem based inverse solution is applied to approximately detect damaged storeys. Furthermore, an updating procedure that is proposed in this study effectively enhances the first prediction. In Step 2, an artificial neural network (ANN) model is designed to indicate damaged members on detected storeys using only the first three modal modes. Compared to other approaches applied to detect damages on high-rise buildings, the robustness of the proposed method is that the required number of lowest modal modes is two and three in Step 1 and Step 2 respectively. Furthermore, regardless of the extension of the building in the horizontal direction, only one lateral displacement of each storey is measured to detect damaged storeys in Step 1 and generally detect damaged elements in Step 2. For light and asymmetrical damage scenarios, two more vertical displacements should be considered to obtain accurate element-level detection. However, for all cases, the required number of DOFs is significantly lower than the full system.

키워드

참고문헌

  1. ACI Committee Report SP-97 (1985), Response of Buildings to Lateral Forces, American Concrete Institute; Detroit, MI, USA.
  2. Bakhary, N. (2008), "Structural condition monitoring and damage identification with artificial neural network", Ph.D. Dissertation; School of Civil and Resource Engineering, The University of Western Australia, Australia.
  3. Beale, M.H., Hagan, M.T. and Demuth, H.B. (2018), Neural Network ToolboxTM Getting Started Guide, The MathWorks Inc., MA, USA.
  4. Cerri, M.N. and Vestroni, F. (2000), "Detection of damage in beams subjected to diffused cracking", J. Sound Vib., 234(2), 259-276. https://doi.org/10.1006/jsvi.1999.2887
  5. Chang, C.M., Lin, T.K. and Chang, C.W. (2018), "Applications of neural network models for structural health monitoring based on derived modal properties", Measurement, 129, 457-470. https://doi.org/10.1016/j.measurement.2018.07.051
  6. Dinh-Cong, D., Pham-Toan,T., Nguyen-Thai, D. and Nguyen-Thoi, T. (2019), "Structural damage assessment with incomplete and noisy modal data using model reduction technique and LAPO algorithm", Struct. Infrastruct. Eng., 15(11), 1436-1449. https://doi.org/10.1080/15732479.2019.1624785
  7. Fukunaga, K. (1990), Introduction to Statistical Pattern Recognition, Academic Press, New York, USA.
  8. Gately, E. (1996), Neural Networks for Financial Forecasting, John Wiley and Sons, New York, USA.
  9. Gibson, J.D. and Melsa, J.L. (1975), Introduction to Nonparametric Detection with Applications, Academic Press, New York, USA.
  10. Gillich, G.R., Furdui, H., Abdel-Wahab, M. and Korka, Z.I. (2019), "A robust damage detection method based on multi-modal analysis in variable temperature conditions", Mech. Syst. Signal. Process., 115, 361-379. https://doi.org/10.1016/j.ymssp.2018.05.037
  11. Hamad, W.I., Owen, J.S. and Hussein, M.F.M. (2011), "A flexural crack model for damage detection in reinforced concrete structures", Proceedings of the 9th International Conference on Damage Assessment of Structures (DAMAS 2011), St Anne's College, University of Oxford, Oxford, UK, July. https://doi.org/10.1088/1742-6596/305/1/012037
  12. Hagan, M.T., Demuth, H.B. and Beale, M. (1995), Neural Network Design, PWS Publishing Company.
  13. Hedayat, A.S., Sloane, N.J.A. and Stufken, J. (1999), Orthogonal Arrays - Theory and Applications, Springer Verlag, New York, USA.
  14. Helton, J.C. and Davis, F.J. (2003), "Latin hypercube sampling and the propagation of uncertainty in analyses of complex system", Reliab. Eng. Syst. Safe., 81(1), 23-69. https://doi.org/10.1016/S0951-8320(03)00058-9
  15. Khatir, S. and Abdel-Wahab, M. (2018), "Fast simulations for solving fracture mechanics inverse problems using POD-RBF XIGA and Jaya algorithm", Eng. Fract. Mech., 205, 285-300. https://doi.org/10.1016/j.engfracmech.2018.09.032
  16. Khatir, S., Abdel-Wahab, M., Boutchicha, D. and Khatir, T. (2019), "Structural health monitoring using modal strain energy damage indicator coupled with teaching-learning-based optimization algorithm and isogoemetric analysis", J. Sound Vib., 448, 230-246. https://doi.org/10.1016/j.jsv.2019.02.017
  17. Khatir, S., Boutchichab, D., Thanh, C.L., Tran-Ngoc, H., Nguyen, T.N. and Abdel-Wahab, M. (2020), "Improved ANN technique combined with Jaya algorithm for crack identification in plates using XIGA and experimental analysis", Theor. Appl. Fract. Mech., 107, 102554. https://doi.org/10.1016/j.tafmec.2020.102554
  18. Kim, J.T. and Stubbs N. (1995a), "Damage detection in offshore jacket structures from limited modal information", Int. J. Offshore Polar, 5(1), 58-66.
  19. Kim, J.T. and Stubbs, N. (1995b), "Model-uncertainty impact and damage-detection accuracy in plate girder", J. Struct. Eng., 121(10), 1409-1417. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:10(1409)
  20. Kim, J.T. and Stubbs, N. (2002), "Improved damage identification method based on modal information", J. Sound Vib., 252(2), 223-238. https://doi.org/10.1006/jsvi.2001.3749
  21. Mirzabeigy, A. (2019), "An inverse approach based on uniform load surface for damage detection in structures", Smart Struct. Syst., Int. J., 24(2), 233-242. https://doi.org/10.12989/sss.2019.24.2.233
  22. Ndambi, J.M., Vantomme, J. and Harri, K. (2002), "Damage assessment in reinforced concrete beams using eigenfrequencies and mode shape derivatives", Eng. Struct., 24(4), 501-515. https://doi.org/10.1016/S0141-0296(01)00117-1
  23. Nguyen, T.Q. (2020), "Damage identification for high-rise buildings using an eigen-problem based approach and an artificial neural network", Ph.D. Dissertation Report; Department of Civil Engineering, Bursa Uludag University, Bursa, Turkey.
  24. Nguyen, H.D., Tran, H., De Roeck, G., Bui, T.T. and Wahab, M.A. (2020), "Damage detection in truss bridges using transmissibility and machine learning algorithm: Application to Nam O bridge", Smart Struct. Syst., Int. J., 26(1), 487-499. http://dx.doi.org/10.12989/sss.2020.26.1.035
  25. Paral, A., Roy, D.K.S. and Samanta, A.K. (2019), "Application of a mode shape derivative-based damage index in artificial neural network for structural damage identification in shear frame building", J. Civil Struct. Health Monitor., 9, 411-423. https://doi.org/10.1007/s13349-019-00342-x
  26. Rizos, P.F., Aspragathos, N. and Dimarogonas, A.D. (1990), "Identification of crack location and magnitude in a cantilever beam from the vibration modes", J. Sound Vib., 138(3), 381-388. https://doi.org/10.1016/0022-460X(90)90593-O
  27. Rytter, A. (1993), "Vibration based inspection of civil engineering structures", Dissertation; University of Aalborg, Denmark.
  28. Sahin, M. and Shenoi, R.A. (2003), "Quantification and localisation of damage in beam-like structures by using artificial neural networks with experimental validation", Eng. Struct., 25(14), 1785-1802. https://doi.org/10.1016/j.engstruct.2003.08.001
  29. Shih, Y. (1994), Neuralyst user's Guide, Cheshire Engineering Corporation.
  30. Sloane, N.J.A. (2020), A Library of Orthogonal Arrays. http://neilsloane.com/oadir/
  31. Smith, S.N. and Coull, A. (1991), Tall Buildings Structures: Analysis and Design, John Wiley and Sons, NJ, USA.
  32. Taranath, B.S. (2016), Tall Building Design: Steel, Concrete, and Composite Systems, CRC Press.
  33. Tran-Ngoc, H., Khatir, S., De Roeck, G., Bui-Tien, T., Nguyen-Ngoc, L. and Abdel-Wahab, M. (2018), "Model updating for Nam O bridge using particle swarm optimization algorithm and genetic algorithm", Sensors, 18(12), 4131. https://doi.org/10.3390/s18124131
  34. Tran-Ngoc, H., Khatir, S., Le_Xuan, T., De Roeck, G., Bui-Tien, T. and Abdel-Wahab, M. (2020), "A novel machine-learning based on the global search techniques using vectorized data for damage detection in structures", Int. J. Eng. Sci., 157, 103376. https://doi.org/10.1016/j.ijengsci.2020.103376
  35. Wahalthantri, B.L., Thambiratnam, D.P., Chan, T.H.T. and Fawzia, S. (2012), "An improved method to detect damage using modal strain energy based damage index", Adv. Struct. Eng., 15(5), 727-742. https://doi.org/10.1260/1369-4332.15.5.727
  36. Yan, Y.J., Cheng, L., Wu, Z.Y. and Yam, L.H. (2007), "Development in vibration-based structural damage detection technique", Mech. Syst. Signal Pr., 21(5), 2198-2211. https://doi.org/10.1016/j.ymssp.2006.10.002
  37. Yun, C.B. and Bahng, E.Y. (2000), "Substructural identification using neural networks", Comput. Struct., 77(1), 41-52. https://doi.org/10.1016/S0045-7949(99)00199-6
  38. Yun, C.B., Yi, J.H. and Bahng, E.Y. (2001), "Joint damage assessment of framed structures using a neural networks technique", Eng. Struct., 23(5), 425-435. https://doi.org/10.1016/S0141-0296(00)00067-5