과제정보
This study was supported by from the Shingu University Industry-Academic Cooperation Foundation Grant 2021.
참고문헌
- Min JW, Jeong HW, Kim KW, et al. Study on the resolution characteristics by using magnetic resonance imaging 3.0T. Journal of Radiological Science and Technology. 2020;43(4):251-57. https://doi.org/10.17946/JRST.2020.43.4.251
- Jeong HW, Min JW, Kim JM, et al. Performance characteristic of a CsI(Tl) flat panel detector radiography system. Journal of Radiological Science and Technology. 2012;35(2):109-17.
- Miyati T, Fujita H, Kasuga T, et al. Measurements of MTF and SNR(f) using a subtraction method im MRI. Physics in Medicine and Biology. 2002;47:2961-72. https://doi.org/10.1088/0031-9155/47/16/311
- Min JW, Jeong HW, Kim KW, et al. Evaluation of image quality for various electronic portal imaging devices in radiation therapy. Journal of Radiological Science and Technology. 2015;38(4):451-61. https://doi.org/10.17946/JRST.2015.38.4.16
- Kim KW, Jeong HW, Min JW, et al. Measurement of image quality according to the time of computed radiography system. Journal of Radiological Science and Technology. 2015;38(4):365-74. https://doi.org/10.17946/JRST.2015.38.4.05
- Kim KW, Jeong HW, Min JW, et al. Evaluation of the performance characteristic for mammography by using edge device. Journal of Radiological Science and Technology. 2016;39(3):415-20. https://doi.org/10.17946/JRST.2016.39.3.16
- Kim KW, Jeong HW, Min JW, et al. Evaluation of the modulation transfer function for computed tomography by using american association physics medicine phantom. Journal of Radiological Science and Technology. 2016;39(2):193-8. https://doi.org/10.17946/JRST.2016.39.2.09
- Sawant A, Antonuk LE, El-Mohri Y. Slit design for efficient and accurate MTF measurement at megavoltage X-ray energies. Medical Physics. 2007;34:1535-45. https://doi.org/10.1118/1.2717405
- Kim JM, Jeong HW, Min JW, et al. Correction method of slit modulation transfer function on digital medical imaging system. Journal of Radiological Science and Technology. 2006;29(3):133-9.
- Min JW, Jeong HW. Comparison of modulation transfer function in measurements by using edge device angle in indirect digital radiography. Journal of Radiological Science and Technology. 2019;42(4):259-63. https://doi.org/10.17946/JRST.2019.42.4.259
- Min JW, Jeong HW. Evaluation of angle optimization on edge test device setting in modulation transfer function. Journal of Radiological Science and Technology. 2020;43(1):15-21. https://doi.org/10.17946/JRST.2020.43.1.15
- Ichikawa K, et al. New method of measuring presampling MTF by fourier transform of square wave chart image. Japanese Journal of Radiological Technology. 2002;58(9):1261-7. https://doi.org/10.6009/jjrt.KJ00001364806
- Kunitomo H. Modulation transfer function-presampled MTF measurements by fourier analysis using square wave chart. Japanese Journal of Radiological Technology. 2009;65(11):1561-7. https://doi.org/10.6009/jjrt.65.1561
- Greer PB, van Doorn T. Evaluation of an algorithm for the assessment of the MTF using an edge method. Medical Physics. 2000;27:2048. https://doi.org/10.1118/1.1288682
- Fujita H, Tasai DY, Itoh T, et al. A simple method for determining the modulation transfer function in digital radiography. IEEE Trans Med Imaging. 1992;11(1):34-9. https://doi.org/10.1109/42.126908
- Samei E, Flynn MJ, Reimann DA, et al. A method for measuring the presampled MTF of digital radiographic systems using an edge test device. Medical Physics. 1998;25:102. https://doi.org/10.1118/1.598165
- IEC (International Electro-technical Commission) 62220-1. Medical electrical equipment Characteristics of digital X-ray imaging devices Part 1: Determination of the detective quantum efficiency. Geneva; 2003.
- Min JW, Jeong HW, Kim SC. Evaluation of noise power spectrum characteristics by using magnetic resonance imaging 3.0T. Journal of Radiological Science and Technology. 2021;44(1):279-88.