Advances in concrete construction

  • 제12권2호
  • /
  • Pages.85-91
  • /
  • 2021
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Combining internal and external curing to improve quality of self-compacting concrete with consideration of climate effects

  • Nguyen, Hung Dinh (Department of Civil Engineering, International University-Vietnam National University Ho Chi Minh City) ;
  • Mai, Luu (Department of Civil Engineering, University of Transportation Ho Chi Minh City) ;
  • Nguyen, Hung Thanh (Department of Civil Engineering, University of Technology and Education Ho Chi Minh City)
  • 투고 : 2020.04.01
  • 심사 : 2021.06.11
  • 발행 : 2021.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Self-compacting concrete used in reinforced concrete structures with high reinforcement ratios such as ports, tall buildings and bridges can bring benefits to the structures. However, the quality of self-compacting concrete is affected by climate conditions and curing methods. Climate conditions are dry and rainy seasons. Curing methods include external and internal curing. External curing by covering the surface of specimens with nylon sheet for zero hour, 4h, 6h and 24h was investigated in this study. Different amounts of lightweight sand to be able to hold water for internal curing were also examined. Results showed that with the combination of internal curing by using 20% lightweight sand to replace traditional sand and external curing by covering with nylon sheet for 24 hours, the compressive strength of self-compacting concrete in the dry season condition is higher than that of self-compacting concrete without lightweight sand ideally cured by soaking under water at laboratory condition.

키워드

참고문헌

  1. Aggarwal, P., Siddique, R., Aggarwal, Y. and Gupta, S.M. (2008), "Self-compacting concrete-Procedure for mix design", Leonardo Elec. J. Pract. Technol., 12, 15-24.
  2. Ahmad, S., Umar, A., Masood, A. and Nayeem, M. (2019): "Performance of self-compacting concrete at room and after elevated temperature incorporating Silica fume", Adv. Concrete Constr., 7(1), 31-37. https://doi.org/10.12989/acc.2019.7.1.031.
  3. Amrutha, N.G., Narasimhan, M.C. and Rajeeva, S. V. (2011), "Chlorideion impermeability of self compacting high volume of fly ash concrete mixes", Int. J. Civil Environ. Eng. IJCEE-IJENS V, 11(4), 29-33.
  4. ASTM International (2007), Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM C125-07.
  5. ASTM International (2007), Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate, ASTM C128-07.
  6. Benyamina, S., Menadi, B., Bernard, S.K. and Kenai, S. (2019), "Performance of self-compacting concrete with manufactured crushed sand", Adv. Concrete Constr., 7(2), 87-96. https://doi.org/10.12989/acc.2019.7.2.087.
  7. Calado, C.F.A., Camoes, A. and Jalali, S. (2013), "Placing and curing self compacting concrete in hot climates". https://pdfs.semanticscholar.org/3c91/3a58c9906e994cf3219fa2 27acbd1b89717b.pdf.
  8. Djelloul, O.K., Menadi, B., Wardeh, G. and Kenai, S. (2018), "Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag", Adv. Concrete Constr., 6(2), 103-121. https://doi.org/10.12989/acc.2018.6.2.103.
  9. Edward, G.N. (2008), Concrete Construction Engineering Handbook, 2nd Edition, CRC Press.
  10. Jain, A., Gupta, R. and Chaudhary, S. (2020), "Influence of granite waste aggregate on properties of binary blend self-compacting concrete", Adv. Concrete Constr., 10(2), 127-140. https://doi.org/10.12989/acc.2020.10.2.127.
  11. Kim, H. and Bentz, D. (2008), "Internal curing with crushed concrete aggregate for high performance concrete", NRMCA Concrete Technology Forums: Focus on Sustainable Development, NRMCA.
  12. Krishna, M.N., Narasimha, R.A.V., Ramana, R.I.V. and Vijaya, S.R.M. (2012), "Mix design procedure for self-compacting concrete", IOSR J. Eng., 2(9), 33-41.
  13. Lenka, S. and Panda, K.C. (2017), "Effect of metakaolin on the properties of conventional and self-compacting concrete", Adv. Concrete Constr., 5(1), 31-48. https://doi.org/10.12989/acc.2017.5.1.31.
  14. Mamlouk, M.S. and Zaniewski, J.P. (2016), Materials for Civil and Construction Engineers, 4th Edition, Pearson.
  15. Mazloom, M., Soltani, A., Karamloo, M., Hassanloo, A. and Ranjbar, A. (2018), "Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete", Ad. Mater. Res., 7(1), 45-72. https://doi.org/10.12989/amr.2018.7.1.045.
  16. Mohameda, S. and Tayeb, B. (2019), "Effect of coarse aggregates and sand contents on workability and static stability of self-compacting concrete", Adv. Concrete Constr., 7(2), 97-105. https://doi.org/10.12989/acc.2019.7.2.097.
  17. Rajeshwari, B.R. and Sivakumara, M.V.N. (2020), "Influence of coarse aggregate properties on specific fracture energy of steel fiber reinforced self compacting concrete", Adv. Concrete Constr., 9(2), 173-181. https://doi.org/10.12989/acc.2020.9.2.173.
  18. Salhi, A., Ghrici, M., Li, A. and Bilir, T. (2019), "Effect of temperature on the behavior of self-compacting concretes and their durability", Adv. Concrete Constr., 7(4), 359-375. https://doi.org/10.12989/acc.2017.5.4.359.
  19. Stegmaier, M. (2005), "Heat curing of self-compacting concrete (SCC)", Otto-Graf-J., 16, 117-183.
  20. Steven, H.K., Beatrix, K. and William, C.P. (2003), Design and Control of Concrete Mixture, 14th Edition, Portland Cement Association, Skokie, Illinois, USA.
  21. TCXDVN 391:2007 (2007), Concrete-Requirements for Natural Moist Curing.
  22. The European Guidelines for Self-Compacting Concrete (2005), Specification, Production and Use.
  23. Yahiaoui, W., Kenai, S., Menadi, B. and El-Hadj Kadri, E. (2017), "Durability of self compacted concrete containing slag in hot climate", Adv. Concrete Constr., 5(3), 271-288. https://doi.org/10.12989/acc.2017.5.3.271.