Acknowledgement
This study was conducted with support of Scientific and Technological Research Council of Turkey (TÜBİTAK) and Karadeniz Technical University with research grant numbers of 117M819 and FBA-2018-7292 respectively.
References
- ABAQUS (2016), Dassault Systemes Simulia Corporation, Providence, Rhode Island.
- Allam, S.M., Elbakry, H.M.F. and Rabeai, A.G. (2013), "Behavior of one-way reinforced concrete slabs subjected to fire", Alex. Eng. J., 52, 749-761. https://doi.org/10.1016/j.aej.2013.09.004.
- ANSYS. (2014). Swanson Analysis System, USA.
- Askegaard, V. and Mossing, P. (1988), "Long term observation of RC-bridge using changes in natural frequency", Nord. Concrete Res., 7, 20-27.
- ASTM E119 (2012), Standart Test Methods for Fire Tests Of Building Construction And Materials, American Society for Testing and Materials (ASTM), West Conshohocken, PA.
- Bajc, U., Saje, M., Planinc, I. and Bratina, S. (2015), "Semi-analytical buckling analysis of reinforced concrete columns exposed to fire", Fire Saf. J., 71, 110-122. https://doi.org/10.1016/j.firesaf.2014.11.018.
- Balaji, A., Luquman K.M., Nagarajan, P. and Madhavan Pillai, T.M. (2016a), "Studies on the behavior of reinforced concrete short column subjected to fire", Alex. Eng. J., 55, 475-486. https://doi.org/10.1016/j.aej.2015.12.022.
- Balaji, A., Muhamed, L.K., Nagarajan, P. and Madhavan Pillai, T.M. (2016b), "Prediction of response of reinforced concrete frames exposed to fire", Adv. Comput. Des., 1, 105-117. https://doi.org/10.12989/acd.2016.1.1.105.
- Bamonte, P. and Lo Monte, F. (2015), "Reinforced concrete columns exposed to standard fire: Comparison among different constitutive models for concrete at high temperature", Fire Saf. J., 71, 310-323. https://doi.org/10.1016/j.firesaf.2014.11.014.
- Bastami, M., Aslani, F. and Omran, M.E. (2010), "High-temperature mechanical properties of concrete", Int. J. Civil Eng., 8, 337-351.
- BS 8110 (1985), Structural Use of Concrete, British Standards Institution (BSI), London.
- Buch, S.H. and Sharma, U.K. (2018), "Fire resistance of reinforced concrete columns: A systematic review. Applications of Fire Engineering", Proceedings of the International Conference of Applications of Structural Fire Engineering (ASFE 2017), Manchester, UK.
- Capua, D.D. and Mari, A.R. (2007), "Nonlinear analysis of reinforced concrete cross-sections exposed to fire", Fire Saf. J., 42, 139-149. https://doi.org/10.1016/j.firesaf.2006.08.009.
- Chen, B., Sun, Y. and Guo, W. (2014), "Experimental investigation of temperature effects on dynamic characteristics of reinforced concrete slab", J. Southwest Jiaotong Univ., 49, 66-71. https://doi.org/10.3969/j.issn.0258-2724.2014.01.011
- Chen, Y.H., Chang, Y.F., Yao, G.C. and Sheu, M.S. (2009), "Experimental research on post-fire behaviour of reinforced concrete columns", Fire Saf. J., 44, 741-748. https://doi.org/10.1016/j.firesaf.2009.02.004.
- Chung, J.H., Consolazio, G.R. and McVay, M.C. (2006), "Finite element stress analysis of a reinforced high-strength concrete column in severe fires", Comput. Struct., 84, 1338-1352. https://doi.org/10.1016/j.compstruc.2006.03.007.
- Cornwell, P., Farrar, C.R., Doebling, S.W. and Sohn, H. (1999), "Environmental variability of modal properties", Exp. Techniq., 23, 45-48. https://doi.org/10.1111/j.1747-1567.1999.tb01320.x.
- Desjardins, S.L., Londono, N.A., Lau, D.T. and Khoo, H. (2006), "Real-time data processing, analysis and visualization for structural monitoring of the Confederation Bridge", Adv. Struct. Eng., 9, 141-157. https://doi.org/10.1260/136943306776232864.
- El-Tayeb, E.H., El-Metwally, S.E., Askar, H.S. and Yousef, A.M. (2017), "Thermal analysis of reinforced concrete beams and frames", HBRC J., 13, 8-24. https://doi.org/10.1016/j.hbrcj.2015.02.001.
- Emberley, R.L. (2013), "A study into the behavior of reinforced-concrete columns under fire exposures using a spreadsheet-based numerical model", Master Thesis, Worcester Polytechnic Institute, Worcester.
- EN 1991-1-2 (2002), Eurocode 1: Actions on Structures-Part 1-2: General Actions-Actions on Structures Exposed to Fire, European Committee for Standardisation (CEN), Brussels.
- EN 1992-1-2 (2004), Eurocode 2: Design of Concrete Structures-Part 1-2: General Rules-Structural Fire Design, European Committee for Standardisation (CEN), Brussels.
- EN 1994-1-2 (2005), Eurocode 4: Design of Composite Steel and Concrete Structures-Part 1.2: General Rules-Structural Fire Design, European Committee for Standardisation (CEN), Brussels.
- Firmo, J.P., Arruda, M.R.T. and Correia, J.R. (2015), "Numerical simulation of the fire behaviour of thermally insulated reinforced concrete beams strengthened with EBR-CFRP strips", Compos. Struct., 126, 360-370. https://doi.org/10.1016/j.compstruct.2015.02.084.
- Hertz, K. (1981), "Simple temperature calculations of fire exposed concrete constructions", Report No. 159, Institute of Building Design, Technical University of Denmark, Kongens Lyngby.
- Huang, Z., Burgess, I.W. and Plank, R.J. (2009), "Three-dimensional analysis of reinforced concrete beam-column structures in fire", J. Struct. Eng., 135, 1201-1212. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:10(1201).
- Inwood, M. (1999), "Review of the New Zealand Standard for Concrete Structures (NZS 3101) for high strength and lightweight concrete exposed to fire", Fire Engineering Research Report 99/10, University of Canterbury, New Zealand.
- ISO 834 (1975), Fire-Resistance Tests-Elements of Building Construction, International Organization for Standardization (ISO), Geneva.
- Kodur, V. and Raut, N. (2012), "A simplified approach for predicting fire resistance of reinforced concrete columns under biaxial bending", Eng. Struct., 41, 428-443. https://doi.org/10.1016/j.engstruct.2012.03.054.
- Kowalski, R. (2009), "Calculations of reinforced concrete structures fire resistance", Arch. Civil Eng. Environ., 2, 61-69.
- Liu, H., Wang, X. and Jiao, Y. (2016), "Effect of temperature variation on modal frequency of reinforced concrete slab and beam in cold regions", Shock Vib., 2016, Article ID 4792786, https://doi.org/10.1155/2016/4792786.
- Macdonald, J.H.G. and Daniell, W.E. (2005), "Variation of modal parameters of a cable-stayed bridge identified from ambient vibration measurements and FE modelling", Eng. Struct., 27, 1916-1930. https://doi.org/10.1016/j.engstruct.2005.06.007.
- Martins, A.M.B. and Rodrigues, J.P.C. (2010), "Behaviour of concrete columns subjected to fire", Proceedings of the 6th International Conference on Strutures in Fire, Michigan, United States.
- Mohamed Bikhiet, M., El-Shafey, N.F. and El-Hashimy, H.M. (2014), "Behavior of reinforced concrete short columns exposed to fire", Alex. Eng. J., 53, 643-653. https://doi.org/10.1016/j.aej.2014.03.011.
- Park, J.E., Shin, Y.S. and Kim, H.S. (2011), "Various factors influencing on thermal behaviors of high strength concrete (HSC) columns under fire", Procedia Eng., 14, 427-433. https://doi.org/10.1016/j.proeng.2011.07.053.
- Raut, N. and Kodur, V. (2012), "Behavior of circular reinforced concrete columns under fire conditions", J. Struct. Fire Eng., 3, 37-56. https://doi.org/10.1260/2040-2317.3.1.37.
- Reddy, D.V., Sobhan, K., Liu, L. and Young, J.D. (2015), "Size effect on fire resistance of structural concrete", Eng. Struct., 99, 468-478. https://doi.org/10.1016/j.engstruct.2015.05.015.
- Regni, M., Arezzo, D., Carbonari, S., Gara, F. and Zonta, D. (2018), "Effect of environmental conditions on the modal response of a 10-story reinforced concrete tower", Shock Vib., 2018, Article ID 9476146, https://doi.org/10.1155/2018/9476146.
- Ruan, Z., Chen, L. and Fang, Q. (2015), "Numerical investigation into dynamic responses of RC columns subjected for fire and blast", J. Loss Prevent. Proc. Indust., 34, 10-21. https://doi.org/10.1016/j.jlp.2015.01.009.
- Selamet, S. (2017), "Turkiye'de yangin muhendisligi", TU YAK Yangin Muhendisligi Dergisi, 2, 62-63.
- Song, W. and Dyke, S.J. (2006), "Ambient vibration based modal identification of the Emerson bridge considering temperature effects", Proceedings of the 4th World Conference on Structural Control and Monitoring, San Diego, USA, July.
- TS 500 (2000), Requirements for Design and Construction of Reinforced Concrete Structures, Turkish Standards Institution, Ankara.
- Wickstrom, U. (1986), "A very simple method for estimating temperatures in fire exposed concrete structures", New Technology to Reduce Fire Losses and Costs, Elsevier Applied Science, London, 186-194.
- Xavier, H.F.B. (2009), "Analysis of reinforced concrete frames exposed to fire based on advanced calculation methods", Master Thesis, University of Porto, Porto, Portugal.
- Xia, Y., Hao, H., Zanardo, G. and Deeks, A.J. (2006), "Long term vibration monitoring of a RC slab: Temperature and humidity effect", Eng. Struct., 28, 441-452. https://doi.org/10.1016/j.engstruct.2005.09.001.
- Yuen, K.V. and Kuok, S.C. (2010), "Ambient interference in longterm monitoring of buildings", Eng. Struct., 32, 2379-2386. https://doi.org/10.1016/j.engstruct.2010.04.012.
- Zha, X.X. (2003), "Three-dimensional non-linear analysis of reinforced concrete members in fire", Build. Environ., 38, 297-307. https://doi.org/10.1016/S0360-1323(02)00059-8.