Acknowledgement
This work was supported by research fund of Chungnam National University, Republic of Korea.
References
- G. Saji, Safety goals for seismic and tsunami risks: lessons learned from the Fukushima Daiichi disaster, Nucl. Eng. Des. 280 (2014) 243-249. https://doi.org/10.1016/j.nucengdes.2014.09.013
- I. Nakamura, N. Kasahara, Excitation tests on elbow pipe specimens to investigate failure behavior under excessive seismic loads, in: ASME 2015 Pressure Vessel and Piping Conference, July 19-23, 2015. Boston, USA.
- P. Sollogoub, The OECD-NEA programme on metallic component margins under high seismic loads (MECOS): towards new criteria, in: ASME 2017 Pressure Vessel and Piping Conference, July 16-20, 2017. Waikoloa, USA.
- S.D. Snow, D.K. Morton, Strain-based acceptance criteria for energy-limited events, in: ASME 2009 Pressure Vessel and Piping Conference, July 26-30, 2009. Prague, Czech Republic.
- C. Mondal, B. Podder, K.R. Kumar, D.R. Yadav, Constitutive description of tensile flow behavior of cold flow-formed AFNOR 15CDV6 steel at different deformation levels, J. Mater. Eng. Perform. 23 (2014) 3586-3599. https://doi.org/10.1007/s11665-014-1127-0
- G. Sainath, B.K. Choudhary, J. Christopher, E.I. Samuel, M.D. Mathew, Applicability of Voce equation for tensile flow and work hardening behaviour of P92 ferritic steel, Int. J. Pres. Ves. Pip. 132 (2015) 1-9. https://doi.org/10.1016/j.ijpvp.2015.05.004
- L. Li, S. Liu, B. Ye, S. Hu, Z. Zhou, Quantitative analysis of strength and plasticity of a 304 stainless steel based on the stress-strain curve, Met. Mater. Int. 22 (2016) 391-396. https://doi.org/10.1007/s12540-016-5466-2
- J. Choung, C. Shim, H. Song, Estimation of failure strain of EH36 high strength marine structural steel using average stress triaxiality, Mar. Struct. 29 (2012) 1-21. https://doi.org/10.1016/j.marstruc.2012.08.001
- R. Schneider, R.J. Grant, N. Sotirov, G. Falkinger, F. Grabner, C. Reichl, M. Scheerer, B. Heine, Z. Zouaoui, Constitutive flow curve approximation of commercial aluminium alloys at low temperatures, Mater. Des. 88 (2015) 659-666. https://doi.org/10.1016/j.matdes.2015.09.034
- J. Agirre, L. Galdos, E.S. Argandona, J. Mendiguren, Hardening prediction of diverse materials using the digital image correlation technique, Mech. Mater. 124 (2018) 71-79. https://doi.org/10.1016/j.mechmat.2018.05.007
- Q. Pham, B. Lee, K. Park, Y. Kim, Influence of the post-necking prediction of hardening law on the theoretical forming limit curve of aluminium sheets, Int. J. Mech. Sci. 140 (2018) 521-536. https://doi.org/10.1016/j.ijmecsci.2018.02.040
- K.B. Othmen, N. Haddar, A. Jegat, P. Manach, K. Elleuch, Ductile fracture of AISI 304L stainless steel sheet in stretching, Int. J. Mech. Sci. 172 (2020) 105404. https://doi.org/10.1016/j.ijmecsci.2019.105404
- J.H. Hollomon, Tensile deformation, Transactions of AIME 162 (1945) 268-290.
- H.W. Swift, Plastic instability under plane stress, J. Mech. Phys. Solid. 1 (1952) 1-18. https://doi.org/10.1016/0022-5096(52)90002-1
- P. Ludwik, Elements der Technologischen Mechanik, Verlag Von Julius Springer, Leipzig, 1909, p. 32.
- E. Voce, The relationship between stress and strain from homogeneous deformation, J. Inst. Met. 74 (1948) 537-562.
- J.E. Hockett, O.D. Sherby, Large strain deformation of polycrystalline metals at low homologous temperatures, J. Mech. Phys. Solid. 23 (1975) 87-98. https://doi.org/10.1016/0022-5096(75)90018-6
- P.E. Armstrong, J.E. Hockett, O.D. Sherby, Large strain multidirectional deformation of 1100 aluminum at 300 K, J. Mech. Phys. Solid. 30 (1982) 27-58.
- S.K. Paul, S. Roy, S. Sivaprasad, H.N. Bar, S. Tarafder, Identification of post-necking tensile stress-strain behavior of steel sheet: an experimental investigation using digital image correlation technique, J. Mater. Eng. Perform. 27 (2018) 5736-5743. https://doi.org/10.1007/s11665-018-3701-3
- C. Annan, E. Beaumont, Low cycle fatigue of stainless steel plates under large plastic strain demands, Journal of Building Engineering 29 (2020) 101160. https://doi.org/10.1016/j.jobe.2019.101160
- E.E. Cabezas, D.J. Celentano, Experimental and numerical analysis of the tensile test using sheet specimens, Finite Elem. Anal. Des. 40 (2004) 555-575. https://doi.org/10.1016/S0168-874X(03)00096-9
- M. Kamaya, M. Kawakubo, A procedure for determining the true stress-strain curve over a large range of strains using digital image correlation and finite element analysis, Mech. Mater. 43 (2011) 243-253. https://doi.org/10.1016/j.mechmat.2011.02.007
- L. Wang, W. Tong, Identification of post-necking strain hardening behavior of thin sheet metals from image-based surface strain data in uniaxial tension tests, Int. J. Solid Struct. 75 (2015) 12-31. https://doi.org/10.1016/j.ijsolstr.2015.04.038
- M. Kamaya, Y. Kitsunai, M. Koshiishi, True stress-strain curve acquisition for irradiated stainless steel including the range exceeding necking strain, J. Nucl. Mater. 465 (2015) 316-325. https://doi.org/10.1016/j.jnucmat.2015.05.027
- Y. Ling, Uniaxial true stress-strain after necking, AMP Journal of Technology 5 (1996) 37-48.
- G. Mirone, A new model for the elastoplastic characterization and the stressstrain determination on the necking section of a tensile specimen, Int. J. Solid Struct. 41 (2004) 3545-3564. https://doi.org/10.1016/j.ijsolstr.2004.02.011
- M. Joun, J.G. Eom, M.C. Lee, A new method for acquiring true stress-strain curves over a large range of strains using a tensile test and finite element method, Mech. Mater. 40 (2008) 586-593. https://doi.org/10.1016/j.mechmat.2007.11.006
- K. Zhao, L. Wang, Y. Chang, J. Yan, Identification of post-necking stress-strain curve for sheet metals by inverse method, Mech. Mater. 92 (2016) 107-118. https://doi.org/10.1016/j.mechmat.2015.09.004
- F. Sebek, P. Kubik, J. Hulka, J. Petruska, Strain Hardening Exponent Role in Phenomenological Ductile Fracture Criteria, vol. 57, 2016, pp. 149-164. https://doi.org/10.1016/j.euromechsol.2015.12.006
- M. Saboori, H. Champliaud, J. Gholipour, A. Gakwaya, J. Savoie, P. Wanjara, Extension of flow stress-strain curves of aerospace alloys after necking, Int. J. Adv. Manuf. Technol. 83 (2016) 313-323. https://doi.org/10.1007/s00170-015-7557-5
- M. Paredes, D.F.B. Sarzosa, R. Savioli, T. Wierzbicki, D.Y. Jeong, D.C. Tyrell, Ductile tearing analysis of TC128 tank car steel under model I loading condition, Theor. Appl. Fract. Mech. 96 (2018) 658-675. https://doi.org/10.1016/j.tafmec.2017.10.006
- M. Paredes, V. Grolleau, T. Wierzbicki, On ductile fracture of 316L stainless steels at room and cryogenic temperature level, Materialia 10 (2020) 100624. https://doi.org/10.1016/j.mtla.2020.100624
- K.J.R. Rasmussen, Full-range stress-strain curves for stainless steel alloys, J. Constr. Steel Res. 59 (2003) 47-61. https://doi.org/10.1016/S0143-974X(02)00018-4
- I. Arrayago, E. Real, L. Gardner, Description of stress-strain curves for stainless steel alloys, Mater. Des. 87 (2015) 540-552. https://doi.org/10.1016/j.matdes.2015.08.001
- K. Abdella, Inversion of a full-range stress-strain relation for stainless steel alloys, Int. J. Non Lin. Mech. 41 (2006) 456-463. https://doi.org/10.1016/j.ijnonlinmec.2005.10.002
- W.M. Quach, J.G. Teng, K.F. Chung, Three-stage full-range stress-strain model for stainless steels, J. Struct. Eng. 134 (2008) 1518-1527. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:9(1518)
- ASME, Materials, ASME Boiler and Pressure Vessel Code Section II, 2015.
- ASTM, Standard Test Methods for Tension Testing of Metallic Materials, ASTM E8/E8M-09, 2009.
- P.W. Bridgman, Studies in Large Plastic Flow and Fracture, Harvard University Press, USA, 1964.
- N.E. Dowling, Mechanical Behavior of Materials, fourth ed., Pearson Education, England, 2012.
- A. Considere, Ann. Ponts Chaussees 9 (1885) 574-605.
- H.D. Kweon, E.J. Heo, D.W. Lee, J.W. Kim, A methodology for determining the true stress-strain curve of SA-508 low alloy steel from a tensile test with finite element analysis, J. Mech. Sci. Technol. 32 (2018) 3137-3143. https://doi.org/10.1007/s12206-018-0616-8
- ABAQUS Analysis User's Guide, Version 2019, Dassault Systems, 2019.
Cited by
- Modelling and simulation on deformation behaviour of Al2014-T6 alloy beyond necking vol.44, pp.p6, 2021, https://doi.org/10.1016/j.matpr.2020.10.533
- Laser-irradiation-induced dynamically recrystallized microstructure and properties of supersonic-particle-deposited Ni-Fe-Cr-Nb-Ti-Al high-entropy alloy coating vol.183, 2021, https://doi.org/10.1016/j.matchar.2021.111600