Acknowledgement
This work was supported mainly by Korea Hydro & Nuclear Power Company through the project "Nuclear Innovation Center for Haeorum Alliance" and partly by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20194030202400).
References
- M. Kasamatsu, S. Hanada, E. Noda, Development of the decision make supporting system on incident management, in: International Congress on Advances in Nuclear Power Plants, Fukui and Kyoto, Japan, April 24-28, 2017.
- H.S. Cho, T.H. Woo, Mechanical analysis of flying robot for nuclear safety and security control by radiological monitoring, Ann. Nucl. Energy 94 (2016) 138-143. https://doi.org/10.1016/j.anucene.2016.03.004
- J.S. Kim, Y.H. Jang, Development of stable walking robot for accident condition monitoring on uneven floors in a nuclear power plant, Nucl. Eng. Tech. 49 (2017) 632-637. https://doi.org/10.1016/j.net.2016.10.004
- M.V. de Oliveira, J.C.S. de Almeida, Application of artificial intelligence techniques in modeling and control of a nuclear power plant pressurizer system, Prog. Nucl. Energy 63 (2013) 71-85. https://doi.org/10.1016/j.pnucene.2012.11.005
- K. Hagita, Y. Kodama, M. Takada, Simplified virtual training system for radiation shielding and measurement in nuclear engineering, Prog. Nucl. Energy 118 (2020) 103127. https://doi.org/10.1016/j.pnucene.2019.103127
- I.J.A.L. Santos, C.H.S. Grecco, A.C.A. Mol, P.V.R. Carvalho, The use of questionnaire and virtual reality in the verification of the human factors issues in the design of nuclear control desk, Int. J. Ind. Ergon. 39 (2009) 159-166. https://doi.org/10.1016/j.ergon.2008.08.005
- S.H. Kim, S.H. Chang, Y.J. Choi, Y.H. Jeong, A passive decay heat removal strategy of the integrated passive safety system (IPSS) for SBO combined with LOCA, Nucl. Eng. Des. 295 (2015) 346-359. https://doi.org/10.1016/j.nucengdes.2015.09.033
- Y.S. Jeong, K.M. Kim, I.G. Kim, I.C. Bang, Hybrid heat pipe-based passive in-core cooling system for advanced nuclear power plant, Appl. Therm. Eng. 90 (2015) 609-618. https://doi.org/10.1016/j.applthermaleng.2015.07.045
- S.D. Park, I.C. Bang, Feasibility of flooding the reactor cavity with liquid gallium coolant for IVR-ERVC strategy, Nucl. Eng. Des. 258 (2013) 13-18. https://doi.org/10.1016/j.nucengdes.2013.01.011
- G.G. Loomis, Summary of the semiscale program (1965-1986), Idaho Natl. Eng. Lab. (1987). NUREG/CR-4945.
- M. Bacchiani, C. Medich, M. Rigamonti, SPES-2, the full-height, full-pressure test facility simulating the AP600 plant, comparison among 2" CL to core make-up tank pressure balance line break, in: Fifth International Topical Meeting on Nuclear Thermal Hydraulics, Operation and Safety, 1997. Beijing, China, April 14-18.
- K. Umminger, L. Dennhardt, s. Schollenberger, Integral test facility PKL: experimental PWR accident investigation, Sci. Technol. Nucl. Instal. (2012) 891056, 2012.
- A. Prosek, O.A. Berar, Advanced presentation of BETHSY 6.2TC test results calculated by RELAP5 and TRACE, Sci. Tech. Nucl. Instal. (2012) 812130, 2012.
- D.L. Reeder, Loft system and test description (5.5-rt nuclear core 1 LOCES), Idaho. Natl. Eng. Lab. (1978). NUREG/CR-0247.
- Y. Kukita, K. Takasa, H. Asaka, T. Yonomoto, H. Nakamura, The effects of break location on PWR small break LOCA: experimental study at the ROSA-IV LSTF, Nucl. Eng. Des. 122 (1990) 255-262. https://doi.org/10.1016/0029-5493(90)90210-O
- M. Ishii, S.T. Ravankar, R. Dowlati, M.L. Bertodano, I. Babelli, W. Wang, H. Pokhama, V.H. Ransom, R. Viskanta, T. Wilmarth, J.T. Han, Scientific Design of Purdue University Multi-Dimensional Integral Test Assembly (PUMA) for GE SBWR, NRC, 1996. NUREG/CR-6309.
- J.N. Reyes, Scaling Analysis for the OSU APEX-CE Integral System Test Facility, Oregon State University, 2001. NUREG/CR-6731.
- Y.-S. Kim, K.Y. Choi, H.S. Park, S. Cho, B.D. Kim, N.H. Choi, W.P. Baek, Commissioning of the ATLAS thermal-hydraulic integral test facility, Ann. Nucl. Energy 35 (2008) 1791-1799. https://doi.org/10.1016/j.anucene.2008.05.010
- M. Ishii, I. Kataoka, Scaling laws for thermal-hydraulic system under single phase and two-phase natural circulation, Nucl. Eng. Des. 258 (1984) 411-425.
- W.A. Carbiener, R.A. Cudnik, Similitude considerations for modeling nuclear reactor blowdowns, Trans. Am. Nucl. Soc. 12 (1969) 361-362.
- A.N. Nahavandi, F.S. Castellana, E.N. Moradkhanian, Scaling laws for modeling nuclear reactor system, Nucl. Sci. Eng. 72 (1979) 75-83. https://doi.org/10.13182/NSE79-A19310
- K.M. Kim, I.C. Bang, Integral effect tests in visualization basis 3D printed test facility for improved applicability of innovative technologies, in: International Topical Meeting on Nuclear Reactor Thermal Hydraulics, 2019. Portland, OR, USA, Aug. 18-23.
- H.J. Yoon, Y.H. Kim, D.H. Lee, C.K. Seong, A safety analysis of the locked rotor event for Ulchin unit 3/4 using RETRAN code, in: Transaction of 2004 KNS Spring Meeting, 2004. Gyeongju, Korea, March 27-28.
- Y.S. Kim, S.G. Yu, K.H. Kang, H.S. Park, S. Cho, K.Y. Choi, Analysis of a station blackout scenario with an ATLAS test, Nucl. Eng. Tech. 45 (2013) 179-190. https://doi.org/10.5516/NET.02.2012.007
- X.G. Yu, H.S. Park, Y.S. Kim, K.H. Kang, S. Cho, K.Y. Choi, Systematic analysis of a station blackout scenario for APR1400 with test facility ATLAS and MARS code from scaling viewpoint, Nucl. Eng. Des. 259 (2013) 205-220. https://doi.org/10.1016/j.nucengdes.2013.03.005