Acknowledgement
This research was supported by the National Key Research and Development Program of China (No.2019YFB1901000) and also supported by China Natural Science Foundation under Grand No.U1867219.
References
- T. Filburn, S. Bullard, Three Mile Island, Chernobyl and Fukushima: Curse of the Nuclear Genie, Springer, 2016 [M].
- F. Kamil, Fukushima nuclear accident, Decouverte (Paris) (2011) 28-31 [J].
- S.J. Zinkle, K.A. Terrani, J.C. Gehin, et al., Accident tolerant fuels for LWRs: a perspective, J. Nucl. Mater. 448 (1-3) (2014) 374-379 [J]. https://doi.org/10.1016/j.jnucmat.2013.12.005
- T. Lee, Assessment of safety culture at a nuclear reprocessing plant, Work. Stress 12 (3) (1998) 217-237 [J]. https://doi.org/10.1080/02678379808256863
- K.A. Terrani, Accident tolerant fuel cladding development: promise, status, and challenges, J. Nucl. Mater. 501 (2018) 13-30 [J]. https://doi.org/10.1016/j.jnucmat.2017.12.043
- S. Yajima, J. Hayashi, M. Omori, et al., Development of a silicon carbide fibre with high tensile strength, Nature 261 (5562) (1976) 683-684 [J]. https://doi.org/10.1038/261683a0
- M.A. Snead, Y. Katoh, T. Koyanagi, et al., SiC/SiC Cladding Materials Properties Handbook, Oak Ridge National Lab.(ORNL), Oak Ridge, TN (United States), 2017 [R].
- R. Yang, B. Cheng, J. Deshon, et al., Fuel R & D to improve fuel reliability, J. Nucl. Sci. Technol. 43 (9) (2006) 951-959 [J]. https://doi.org/10.3327/jnst.43.951
- L.C. Walters, B.R. Seidel, J.H. Kittel, Performance of metallic fuels and blankets in liquid-metal fast breeder reactors, Nucl. Technol. 65 (2) (1984) 179-231 [J]. https://doi.org/10.13182/NT84-A33408
- K.J. Geelhood, W.G. Luscher, FRAPCON-3.5: a computer code for the calculation of steady-state, thermal-mechanical behavior of oxide fuel rods for high burnup[R]. NUREG/CR-7022, Washington, Pacific Northwest National Laboratory, U.S. Nuclear Regulatory Commission 1 (2014). PNNL-19418, Vol. 1. 2011.
- H. Liao, Z. Wu, L. Liu, et al., Modification and update of FROBA-ROD code and its applications in fuel rod behavior analysis for PWRs, Ann. Nucl. Energy 133 (2019) 900-915 [J]. https://doi.org/10.1016/j.anucene.2019.07.031
- H. Yu, W. Tian, Z. Yang, et al., Development of fuel ROd behavior analysis code (FROBA) and its application to AP1000, Ann. Nucl. Energy 50 (2012) 8-17 [J]. https://doi.org/10.1016/j.anucene.2012.06.010
- Y. Deng, Y. Wu, C. Gong, et al., Upgrade of FROBA code and its application in thermal-mechanical analysis of space reactor fuel, Nucl. Eng. Des. 332 (2018) 297-306 [J]. https://doi.org/10.1016/j.nucengdes.2018.03.041
- Y. Deng, Y. Wu, B. Qiu, et al., Development of a new pellet-clad mechanical interaction (PCMI) model and its application in ATFs, Ann. Nucl. Energy 104 (2017) 146-156 [J]. https://doi.org/10.1016/j.anucene.2017.02.022
- L.L. Snead, T. Nozawa, Y. Katoh, et al., Handbook of SiC properties for fuel performance modeling, J. Nucl. Mater. 371 (1-3) (2007) 329-377 [J]. https://doi.org/10.1016/j.jnucmat.2007.05.016
- L.L. Snead, T. Nozawa, Y. Katoh, et al., Handbook of SiC properties for fuel performance modeling, J. Nucl. Mater. 371 (1) (2007) 329-377 [J]. https://doi.org/10.1016/j.jnucmat.2007.05.016
- Y. Katoh, L.L. Snead, T. Nozawa, et al., Thermophysical and mechanical properties of near-stoichiometric fiber CVI SiC/SiC composites after neutron irradiation at elevated temperatures, J. Nucl. Mater. 403 (1-3) (2010) 48-61 [J]. https://doi.org/10.1016/j.jnucmat.2010.06.002
- E. Rohmer, E. Martin, C. Lorrette, Mechanical properties of SiC/SiC braided tubes for fuel cladding, J. Nucl. Mater. 453 (1-3) (2014) 16-21 [J]. https://doi.org/10.1016/j.jnucmat.2014.06.035
- K.R. Robb, J.W. McMurray, K.A. Terrani, Severe Accident Analysis of BWR Core Fueled with UO 2/FeCrAl with Updated Materials and Melt Properties from Experiments, ORNL TM-2016/237, Oak Ridge, TN, 2016 [R].
- D. Kim, H.G. Lee, J.Y. Park, et al., Fabrication and measurement of hoop strength of SiC triplex tube for nuclear fuel cladding applications, J. Nucl. Mater. 458 (2015) 29-36 [J]. https://doi.org/10.1016/j.jnucmat.2014.11.117
- Y. Katoh, T. Nozawa, C. Shih, et al., High-dose neutron irradiation of Hi-Nicalon Type S silicon carbide composites. Part 1: mechanical and physical properties, J. Nucl. Mater. 462 (2015) 443-449 [J]. https://doi.org/10.1016/j.jnucmat.2014.06.038
- J.G. Stone, R. Schleicher, C.P. Deck, et al., Stress analysis and probabilistic assessment of multi-layer SiC-based accident tolerant nuclear fuel cladding, J. Nucl. Mater. 466 (2015) 682-697 [J]. https://doi.org/10.1016/j.jnucmat.2015.08.001
- R.O. Meyer, H.H. Scott, R.K. McCardell, Regulatory assessment of test data for reactivity-initiated accidents, Nucl. Saf. 37 (4) (1996) 271-288 [J].
- C.H. Carter Jr., R.F. Davis, J. Bentley, Kinetics and mechanisms of high-temperature creep in silicon carbide: II, chemically vapor deposited, J. Am. Ceram. Soc. 67 (11) (1984) 732-740 [J]. https://doi.org/10.1111/j.1151-2916.1984.tb19510.x
- Y. Katoh, T. Koyanagi, J.L. Mcduffee, et al., Dimensional stability and anisotropy of SiC and SiC-based composites in transition swelling regime, J. Nucl. Mater. 499 (2017) 471-479 [J].
- D.M. Carpenter, Assessment of Innovative Fuel Designs for High Performance Light Water Reactors, Massachusetts Institute of Technology, 2006 [D].
- R.P. Arnold, Silicon Carbide Oxidation in High Temperature Steam, Massachusetts Institute of Technology, 2011 [D].
- Alexander, Assessing Thermo-Mechanical Performance of ThO2 and SiC Clad Light Water Reactor Fuel Rods with a Modular Simulation Tool, Massachusetts Institute of Technology, 2015 [D].
- J.Y. Park, I.H. Kim, Y.I. Jung, et al., Long-term corrosion behavior of CVD SiC in 360 C water and 400 C steam, J. Nucl. Mater. 443 (1-3) (2013) 603-607 [J]. https://doi.org/10.1016/j.jnucmat.2013.07.058
- S. Kondo, M. Lee, T. Hinoki, et al., Effect of irradiation damage on hydrothermal corrosion of SiC, J. Nucl. Mater. 464 (2015) 36-42 [J]. https://doi.org/10.1016/j.jnucmat.2015.04.034
- J. Bischoff, C. Delafoy, C. Vauglin, et al., AREVA NP's enhanced accidenttolerant fuel developments: focus on Cr-coated M5 cladding, Nuclear Engineering and Technology 50 (2) (2018) 223-228 [J]. https://doi.org/10.1016/j.net.2017.12.004
- J.C. Brachet, C. Lorrette, A. Michaux, et al., CEA studies on advanced nuclear fuel claddings for enhanced Accident Tolerant LWRs Fuel (LOCA and beyond LOCA conditions), in: Proceedings of the Fontevraud 8: Conference on Contribution of Materials Investigations and Operating Experience to LWRs' Safety, Performance and Reliability, Hoboken, NJ, USA, 2014 [C].
- M. Michalik, M. Hansel, J. Zurek, et al., Effect of water vapour on growth and adherence of chromia scales formed on Cr in high and low PO2-environments at 1000 and 1050 C, Mater. A. T. High. Temp. 22 (3-4) (2005) 213-221 [J]. https://doi.org/10.3184/096034005782744443
- T.S. Byun, E. Lara-Curzio, R.A. Lowden, et al., Miniaturized fracture stress tests for thin-walled tubular SiC specimens, J. Nucl. Mater. 367 (2007) 653-658 [J]. https://doi.org/10.1016/j.jnucmat.2007.03.014
- Y. Katoh, L.L. Snead, Mechanical properties of cubic silicon carbide after neutron irradiation at elevated temperatures, in: Effects of Radiation on Materials: 22nd Symposium, ASTM International, Richland, WA, USA, 2006 [C].
- K.J. Geelhood, W.G. Luscher, FRAPTRAN-2.0: Integral Assessment, vol. 2, Pacific Northwest National Laboratory, PNNL-19400, 2016 [R].
- PastoreG. WilliamsonRL, K.A. Gamble, GardnerRJ, J. Tompkins, W. Liu, Development of a LOCA Experiment Benchmark for BSION vol. 9, Idaho National Laboratory, 2019 [R].
- K.J. Geelhood, W.G. Luscher, FRAPTRAN-2.0: Integral Assessment, vol. 2, Pacific Northwest National Laboratory, PNNL-19400, 2016 [R].
- S.H. Kim, C.Y. Joung, H.S. Kim, et al., Fabrication method and thermal conductivity assessment of molybdenum-precipitated uranium dioxide pellets, J. Nucl. Mater. 352 (1-3) (2006) 151-156 [J]. https://doi.org/10.1016/j.jnucmat.2006.02.049
- S. Nishigaki, K. Maekawa, Fabrication of BeO-UO2-Be fuel pellets, J. Nucl. Mater. 14 (1964) 453-458 [J]. https://doi.org/10.1016/0022-3115(64)90211-9
- R.G. Mills, J.O. Barner, D.E. Johnson, et al., Irradiation effects on dispersion type BeO-UO2 fuels for ebor, J. Nucl. Mater. 14 (1964) 482-486 [J]. https://doi.org/10.1016/0022-3115(64)90215-6
- S. Ishimoto, M. Hirai, K. Ito, et al., Thermal conductivity of UO2-BeO pellet, J. Nucl. Sci. Technol. 33 (2) (1996) 134-140 [J]. https://doi.org/10.1080/18811248.1996.9731875
- H.S. Kuchibhotla, Enhanced Thermal Conductivity Oxide Fuels: Compatibility and Novel Fabrication Techniques Using BeO[D]. MS Thesis, School of Nuclear Engineering, Purdue University, 2004.
Cited by
- Effects of ATF cladding properties on PWR responses to an SBO accident: A sensitivity analysis vol.165, 2021, https://doi.org/10.1016/j.anucene.2021.108784
- Development of a 2D axisymmetric SiC cladding mechanical model and its applications for steady-state and LBLOCA analysis vol.558, 2022, https://doi.org/10.1016/j.jnucmat.2021.153311