Acknowledgement
This study was supported by the Ministry of Trade, Industry and Energy through KETEP (Korea Institute of Energy Technology Evaluation Planning) (No. 20181510102380). The first author appreciates the financial support of the National Research Foundation of Korea (NRF) grant funded by the Korea government (Ministry of Science and ICT) (No. 2020R1G1A1005510).
References
- S. Kwag, D. Hahm, Development of an earthquake-induced landslide risk assessment approach for nuclear power plants, Nucl. Eng. Technol. 50 (8) (2018) 1372-1386. https://doi.org/10.1016/j.net.2018.07.016
- S. Kwag, Y. Ryu, B.S. Ju, Efficient seismic fragility analysis for large-scale piping system utilizing Bayesian approach, Appl. Sci. 10 (4) (2020) 1515. https://doi.org/10.3390/app10041515
- S. Kwag, A. Gupta, Probabilistic risk assessment framework for structural systems under multiple hazards using Bayesian statistics, Nucl. Eng. Des. 315 (2017) 20-34. https://doi.org/10.1016/j.nucengdes.2017.02.009
- B.S. Ju, S.K. Tadinada, A. Gupta, Fragility analysis of threaded T-joint connections in hospital piping systems, in: Pressure Vessels and Piping Conference, vol. 44588, 2011, January, pp. 147-155.
- Y. Tian, Experimental Seismic Study of Pressurized Fire Sprinkler Piping Subsystems, State University of New York at Buffalo, 2013.
- D. Hahm, J. Park, I.K. Choi, Seismic performance evaluation of piping system crossing the isolation interface in seismically isolated NPP, J. Earthq. Eng. Soc. Korea 18 (3) (2014) 141-150. https://doi.org/10.5000/EESK.2014.18.3.141
- Y. Tian, A. Filiatrault, G. Mosqueda, Seismic response of pressurized fire sprinkler piping systems I: experimental study, J. Earthq. Eng. 19 (4) (2015) 649-673. https://doi.org/10.1080/13632469.2014.994147
- Y. Tian, A. Filiatrault, G. Mosqueda, Seismic response of pressurized fire sprinkler piping systems II: numerical study, J. Earthq. Eng. 19 (4) (2015b) 674-699. https://doi.org/10.1080/13632469.2014.994148
- B.G. Jeon, S.W. Kim, H.S. Choi, D.U. Park, N.S. Kim, A failure estimation method of steel pipe elbows under in-plane cyclic loading, Nucl. Eng. Technol. 49 (1) (2017) 245-253. https://doi.org/10.1016/j.net.2016.07.006
- S.W. Kim, H.S. Choi, B.G. Jeon, D.G. Hahm, Low-cycle fatigue behaviors of the elbow in a nuclear power plant piping system using the moment and deformation angle, Eng. Fail. Anal. 96 (2019) 348-361. https://doi.org/10.1016/j.engfailanal.2018.10.021
- B.S. Ju, W.Y. Jung, Y.H. Ryu, Seismic fragility evaluation of piping system installed in critical structures, Struct. Eng. Mech. 46 (3) (2013) 337-352. https://doi.org/10.12989/sem.2013.46.3.337
- B.S. Ju, A. Gupta, Seismic fragility of threaded Tee-joint connections in piping systems, Int. J. Pres. Ves. Pip. 132 (2015) 106-118. https://doi.org/10.1016/j.ijpvp.2015.06.001
- S. Soroushian, A.E. Zaghi, M. Maragakis, A. Echevarria, Y. Tian, A. Filiatrault, Analytical seismic fragility analyses of fire sprinkler piping systems with threaded joints, Earthq. Spectra 31 (2) (2015) 1125-1155. https://doi.org/10.1193/083112EQS277M
- M. Kunieda, T. Chiba, H. Kobayashi, Positive use of damping devices for piping systemsdsome experiences and new proposals, Nucl. Eng. Des. 104 (2) (1987) 107-120. https://doi.org/10.1016/0029-5493(87)90292-5
- Y. Park, G. DeGrassi, C. Hofmayer, P. Bezler, N. Chokshi, Analysis of Nuclear Piping System Seismic Tests with Conventional and Energy Absorbing Supports (No. BNL-NUREG-64173; CONF-970826-7), Brookhaven National Lab., Upton, NY (United States), 1997.
- K. Fujita, T. Kimura, Y. Ohe, Seismic response analysis of piping systems with nonlinear supports using differential algebraic equations, J. Pressure Vessel Technol. 126 (1) (2004) 91-97. https://doi.org/10.1115/1.1634589
- S.V. Bakre, R.S. Jangid, G.R. Reddy, Seismic response of piping systems with isolation devices, in: Proceedings of the 13th World Conference on Earthquake Engineering, 2004, August.
- S.V. Bakre, R.S. Jangid, G.R. Reddy, Optimum X-plate dampers for seismic response control of piping systems, Int. J. Pres. Ves. Pip. 83 (9) (2006) 672-685. https://doi.org/10.1016/j.ijpvp.2006.05.003
- P. Kumar, R.S. Jangid, G.R. Reddy, Response of piping system with semi-active variable stiffness damper under tri-directional seismic excitation, Nucl. Eng. Des. 258 (2013) 130-143. https://doi.org/10.1016/j.nucengdes.2013.01.025
- P. Kumar, R.S. Jangid, G.R. Reddy, Comparative performance of passive devices for piping system under seismic excitation, Nucl. Eng. Des. 298 (2016) 121-134. https://doi.org/10.1016/j.nucengdes.2015.11.019
- S. Rechenberger, D. Mair, Vibration control of piping systems and structures using tuned mass dampers, in: ASME 2017 Pressure Vessels and Piping Conference (Pp. V03BT03A035-V03BT03A035), American Society of Mechanical Engineers, 2017, July.
- G.B. Song, P. Zhang, L.Y. Li, M. Singla, D. Patil, H.N. Li, Y.L. Mo, Vibration control of a pipeline structure using pounding tuned mass damper, J. Eng. Mech. 142 (6) (2016), 04016031. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001078
- J. Jiang, P. Zhang, D. Patil, H.N. Li, G. Song, Experimental studies on the effectiveness and robustness of a pounding tuned mass damper for vibration suppression of a submerged cylindrical pipe, Struct. Contr. Health Monit. 24 (12) (2017), e2027. https://doi.org/10.1002/stc.2027
- W. Wang, D. Dalton, X. Hua, X. Wang, Z. Chen, G. Song, Experimental study on vibration control of a submerged pipeline model by eddy current tuned mass damper, Appl. Sci. 7 (10) (2017) 987. https://doi.org/10.3390/app7100987
- J. Tan, M. Ho, S. Chun, P. Zhang, J. Jiang, Experimental study on vibration control of suspended piping system by single-sided pounding tuned mass damper, Appl. Sci. 9 (2) (2019) 285. https://doi.org/10.3390/app9020285
- S. Kwag, J. Kwak, H. Lee, J. Oh, G.H. Koo, Enhancement in the seismic performance of a nuclear piping system using multiple tuned mass dampers, Energies 12 (11) (2019) 2077. https://doi.org/10.3390/en12112077
- H. Frahm, Device for Damping Vibrations of Bodies, 1909. U.S. Patent No.989958.
- K.C.S. Kwok, B. Samali, Performance of tuned mass dampers under wind loads, Eng. Struct. 17 (9) (1995) 655-667. https://doi.org/10.1016/0141-0296(95)00035-6
- T.T. Soong, G.F. Dargush, Passive Energy Dissipation Systems in Structural Engineering, John Wiley & Sons Ltd., Chichester, England, 1997.
- S. Chang, W. Sun, S.G. Cho, D. Kim, Vibration control of nuclear power plant piping system using stockbridge damper under earthquakes, Sci. Technol. Nucl. Instal. (2016) 12, 2016, Article ID 5014093.
- B. Li, K. Dai, H. Li, B. Li, S. Tesfamariam, Optimum design of a non-conventional multiple tuned mass damper for a complex power plant structure, Struct. Infrastruct. Eng. 15 (7) (2019) 954-964. https://doi.org/10.1080/15732479.2019.1585461
- S.G. Cho, S. Chang, D. Sung, Application of tuned mass damper to mitigation of the seismic responses of electrical equipment in nuclear power plants, Energies 13 (2) (2020) 427. https://doi.org/10.3390/en13020427
- M. Khazaee, S.E. Khadem, A. Moslemi, A. Abdollahi, Vibration mitigation of a pipe conveying fluid with a passive geometrically nonlinear absorber: a tuning optimal design, Commun. Nonlinear Sci. Numer. Simulat. 91 (2020) 105439. https://doi.org/10.1016/j.cnsns.2020.105439
- Kaeri, Ultimate-level Seismic Performance Evaluation of a Piping System. KAERI/CM-1402/2010, Korea Atomic Energy Research Institute, Daejeon, Korea, 2010.
- J.P. Den Hartog, Mechanical Vibrations, MaGraw-Hill, 1956, p. 87, 1956.
- G.B. Warburton, Optimum absorber parameters for various combinations of response and excitation parameters, Earthq. Eng. Struct. Dynam. 10 (3) (1982) 381-401. https://doi.org/10.1002/eqe.4290100304
- F. Sadek, B. Mohraz, A.W. Taylor, R.M. Chung, A method of estimating the parameters of tuned mass dampers for seismic applications, Earthq. Eng. Struct. Dynam. 26 (6) (1997) 617-635. https://doi.org/10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z
- R. Rana, T.T. Soong, Parametric study and simplified design of tuned mass dampers, Eng. Struct. 20 (3) (1998) 193-204. https://doi.org/10.1016/S0141-0296(97)00078-3
- V.B. Bhandari, Design of Machine Elements, Tata McGraw-Hill Education, 2010.
- A.K. Chopra, Dynamics of Structures, Pearson Education, Upper Saddle River, NJ, 2012.
- S. Kwag, J. Park, I.K. Choi, Development of efficient complete-sampling-based seismic PSA method for nuclear power plant, Reliab. Eng. Syst. Saf. 197 (2020b) 106824. https://doi.org/10.1016/j.ress.2020.106824
- S.W. Kim, B.G. Jeon, D.G. Hahm, M.K. Kim, Seismic fragility evaluation of the base-isolated nuclear power plant piping system using the failure criterion based on stress-strain, Nucl. Eng. Technol. 51 (2) (2019) 561-572. https://doi.org/10.1016/j.net.2018.10.006
- S. Kwag, J. Kwak, H. Lee, J. Oh, G.H. Koo, A numerical study on improvement in seismic performance of nuclear components by applying dynamic absorber, J. Comput. Struct. Eng. Inst. Korea 32 (1) (2019b) 17-27. https://doi.org/10.7734/COSEIK.2019.32.1.17
- USNRC RG 1.60, Rev. 2, Design Response Spectra for Seismic Design of Nuclear Power Plants.
Cited by
- Evaluation of the Limit State of a Six-Inch Carbon Steel Pipe Elbow in Base-Isolated Nuclear Power Plants vol.14, pp.24, 2021, https://doi.org/10.3390/en14248400