DOI QR코드

DOI QR Code

Evaluation of seismic performance of rotational-friction slip dampers in near-field and far-filed earthquakes

  • Received : 2020.09.11
  • Accepted : 2021.07.21
  • Published : 2021.08.25

Abstract

In this study, the performance of rotational-friction slip dampers in steel structures with different heights is investigated by the use of fragility curves. The use of dampers is one of the methods for vibration control of structures by simultaneously increasing both the structural stiffness and damping. Rotational-friction slip dampers are among the passive control devices that dampen the earthquake energy through their stable cyclic behavior. To study the performance of these devices in steel structures, 3, 6 and 9-story steel moment frame structures are designed, and the mentioned dampers are attached to the structure by Chevron braces. To account for the earthquake uncertainty, with the aid of incremental dynamic analysis (IDA), the damper-equipped structure is subjected to both near-field and far-field ground motion records. The acceleration and drift engineering demand parameters are selected as the functions to quantify the damage states, and the design, modeling and material properties uncertainties are considered in accordance with FEMA P-695. Evaluation of statistical results and comparison of the fragility curves, shows that the probability of failure at different damage states decreases when the dampers are added to the structure. This decrease is more remarkable in low-rise structures and near-fault ground motions.

Keywords

References

  1. Aiken, I.D., Kelly, J.M. and Pall, A.S. (1988), Seismic Response of a Nine-Story Steel Frame with Friction-Damped Cross-Bracing, 9WCEE, Tokyo/Kyoto, Japan.
  2. AISC 341 (2010), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Illinois, U.S.A.
  3. AISC 360 (2010), Specification for Structural Steel Buildings, ANSI/AISC 360-10, American Institute of Steel Construction, Chicago, Illinois, U.S.A.
  4. Alavi, B. and Krawinkler, H. (2000) "Considering of near-fault ground motion effects in seismic design", Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand.
  5. Alirezaei, M., Mofid, M. and Tajamolian, H. (2015), "Investigation on the seismic behavior of single story concrete frames equipped with metallic yielding dampers", Scientia Iranica, 22(6), 2061-2068.
  6. Anoushehei, M., Daneshjoo, F., Mahboubi, S. and Khazaeli, S. (2017), "Experimental investigation on hysteretic behavior of rotational friction dampers with new friction materials", Steel Compos. Struct., 24(2), 239-248. https://doi.org/10.12989/scs.2017.24.2.239.
  7. ASCE 7 (2016), Minimum Design Loads for Building and Other Structures, American Society of Civil Engineers, Reston, Virginia, U.S.A.
  8. Bertero, V., Mahin, S. and Herrera, R.A. (1978), "Aseismic design implication of near-fault San Fernando earthquake records", Earthq. Eng. Struct. Dyn., 6, 31-42. https://doi.org/10.1002/eqe.4290060105.
  9. CSI (2015), ETABS 2015 ver. 15.2.2, Computers and Structures Inc., U.S.A. http://www.csiamerica.com
  10. FEMA-NIBS (2003), Earthquake Loss Estimation Methodology, Technical Manual Federal Emergency Management Agency and National Institute of Building Sciences, Washington, U.S.A.
  11. FEMA, P. (2009), 695, Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency. Washington D.C.
  12. Kalkan, E. and Kunnath, S.K. (2006), "Effects of fling step and forward directivity on seismic response of buildings", Earthq. Spectra, 22, 367-390. https://doi.org/10.1193/1.2192560.
  13. Mahin, S., Bertero, V., Chopra, A.K. and Collins, R. (1976), Response of the Olive View hospital main building during the San Fernando earthquake, Earthquake Engineering Research Center (EERC), Report No. 76/22.1976, University of California (UCB), Berkeley, CA, U.S.A. https://nehrpsearch.nist.gov/static/files/NSF/PB271425.pdf.
  14. Mirtaheri, M., Amini, M. and Doosti Rad, M. (2017), "The effect of mainshock-aftershock on the residual displacement of buildings equipped with cylindrical frictional damper", Earthq. Struct., 12(5), 515-527. http://dx.doi.org/10.12989/eas.2017.12.5.515.
  15. Mualla, I.H. and Belev, B. (2002), "Performance of steel frames with a new friction damper device under earthquake excitation", Eng. Struct., 24(3), 365-371. https://doi.org/10.1016/S0141-0296(01)00102-X.
  16. Naeem, A. and Kim, J. (2020), "Seismic retrofit of structures using rotational friction dampers with restoring force", Advan. Struct. Eng., 23(16) 3525-3540, https://doi.org/10.1177/1369433220939213.
  17. Naeem, K. and Kim, J. (2019), "Seismic performance evaluation of a multi-slit damper", Eng. Struct., 189, 332-346. https://doi.org/10.1016/j.engstruct.2019.03.107.
  18. Nour Eldin, M., Kim, J. and Kim, J. (2018), "Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost", Steel Compos. Struct., 27(5), 633-646. http://dx.doi.org/10.12989/scs.2018.27.5.633.
  19. Pall, A.S. and Marsh C. (1982), "Response of friction damped braced frames", J. Struct. Div., ASCE, 108(9), 1313-1323. https://doi.org/10.1061/JSDEAG.0005968
  20. Partovi Mehr, N., Khoshnoudian, F. and Tajammolian H. (2017), "Effects of vertical component of near-field ground motions on seismic responses of asymmetric structures supported on TCFP bearings", Smart Struct. Syst., 20(6), 641-656. http://dx.doi.org/10.12989/sss.2017.20.6.641.
  21. PEER (2008), Open System for Earthquake Engineering Simulation (OpenSees) development platform by the Pacific Earthquake Engineering Research Center (PEER), http://opensees.berkeley.edu
  22. PEER (2020), PEER Ground Motion Database development by the Pacific Earthquake Engineering Research Center (PEER). http:// ngawest2.berkeley.edu
  23. Rezaei Rad, A. and Banazadeh, M. (2018), "Probabilistic risk-based performance evaluation of seismically base-isolated steel structures subjected to far-field earthquakes", Build., 8(9), 128. https://doi.org/10.3390/buildings8090128.
  24. Rise, A.T.S.H. (2005), American Institute of Steel Construction.
  25. SAB Steel Development Company (2016), Designing and Manufacturing of Galvanized Lines for Seven Diamonds Industry and Sub-Circular Friction Dampers, National Conference on Civil Engineering, Shahid Beheshti University, Tehran, Iran.
  26. Shrestha, B., Hao, H. and Bi, K. (2016), "Seismic response analysis of multiple-frame bridge with unseating restrainers considering ground motion spatial variation and SSI", Advan. Struct, Eng., 18(6), 873-891. https://doi.org/10.1260/1369-4332.18.6.873.
  27. Tajammolian, H. and Khoshnoudian, F. (2018a), "Reliability of symmetric and asymmetric structures mounted on TCFP base isolators subjected to near-field earthquakes", J. Perform. Construct. Facilities, AISC, 32(4), 04018042. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001182.
  28. Tajammolian, H. and Khoshnoudian, F. (2018b), "Acceleration amplification due to rotational components of near-fault earthquakes in triple concave friction pendulum base-isolated structures", Canadian J. Civil Eng., 45(4), 314-327. https://doi.org/10.1139/cjce-2016-0354.
  29. Tajammolian, H. and Mofid, M. (2013), "On the characteristics and design of yielding elements used in steel-braced framed structures", Struct. Des. Tall Spec. Build., 22(2), 179-191. https://doi.org/10.1002/tal.669.
  30. Tajammolian, H., Khoshnoudian, F., Rezaei Rad, A. and Loghman, V. (2018), "Seismic fragility assessment of asymmetric structures supported on TCFP bearings subjected to near-field earthquakes", Struct., 13, 66-78. https://doi.org/10.1016/j.istruc.2017.11.004.
  31. Tajammolian, H., Khoshnoudian, F., Talaei, S. and Loghman, V. (2014), "The effects of peak ground velocity of near-field ground motions on the seismic responses of base-isolated structures mounted on friction bearings", Earthq. Struct., 7(6), 1259-1282. http://dx.doi.org/10.12989/eas.2014.7.6.1159.
  32. Vafaei, M.R., Mursal, M., Sheikh, O. and Alih S.C. (2019), "Experimental study on the efficiency of tapered strip dampers for the seismic retrofitting of damaged non-ductile RC rrames", Eng. Struct., 199, 109601. https://doi.org/10.1016/j.engstruct.2019.109601.
  33. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  34. Westenenk, B., Edwards J.J., de la Llera J.C. and Junemann, R. (2019), "Self-Centering Frictional Damper (SCFD)", Eng. Struct., 197, 109425. https://doi.org/10.1016/j.engstruct.2019.109425.