DOI QR코드

DOI QR Code

Experimental and numerical study on seismic behavior of a self-centering railway bridge pier

  • Xia, Xiushen (School of Civil Engineering, Lanzhou Jiaotong University) ;
  • Wu, Suiwen (Department of Civil and Environmental Engineering, University of Nevada) ;
  • Wei, Xinghan (Gansu Provincial Highway Aviation Tourism Investment Group Co., Ltd) ;
  • Jiao, Chiyu (Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture) ;
  • Chen, Xingchong (School of Civil Engineering, Lanzhou Jiaotong University)
  • 투고 : 2020.12.13
  • 심사 : 2021.07.01
  • 발행 : 2021.08.25

초록

This study mainly focuses on experimental and numerical investigation of the isolation mechanism and seismic performance of a self-centering railway bridge pier. To begin, a 1/25 scale typical self-centering railway pier model was designed and constructed, which consisted of a gravity pier, a spread foundation and a pedestal. The gravity pier was rigidly connected to the spread foundation, which was then directly seated at the top of the pile cap to allow the uplift of the pier during strong earthquakes. The model was tested in a pseudo-static manner under constant axial load and cyclic lateral load to characterize its seismic performance. It was found that the lateral load, the bending moment at the pier bottom, and the width of compression zone at the bottom of pier remained essentially constant when the uplift reached a certain extent. The hysteretic curves were in inverse 'Z' shape with narrow loops indicating good self-centering effect but poor energy dissipation. This means that the lateral force-displacement relationship of this type of piers can be simplified as an elasto-plastic curve and they should be used along with additional energy-dissipation devices. Upon the test results, a two-spring model was proposed and developed in the OpenSees platform to represent the test model, which was analyzed using the test load history. The results indicate that the two-spring model can simulate the pseudo-static test with high precision. This modeling technique hence can be employed to analyze seismic response of this type of bridge piers.

키워드

과제정보

The research described in this paper was financially supported by the National Natural Science Foundation of China (Grant No. 52068041, 51668035, and 51368033), and the Tianyou Innovation Team of Lanzhou Jiaotong University (Grant No. TY202007).

참고문헌

  1. Acikgoz, S. and DeJong, M.J. (2012), "The interaction of elasticity and rocking in flexible structures allowed to uplift", Earthq. Eng. Struct. Dyn., 41(15), 2177-2194. https://doi.org/10.1002/eqe.2181.
  2. Agalianos, A., Psychari, A., Vassiliou, M.F., Stojadinovic, B. and Anastasopoulos, I. (2017), "Comparative assessment of two rocking isolation techniques for a motorway overpass bridge", Front. Built Environ., 3(47). https://doi.org/10.3389/fbuil.2017.00047.
  3. Antonellis, G. and Panagiotou, M. (2014), "Seismic response of bridges with rocking foundations compared to fixed-base bridges at a near-fault site", J. Bridge Eng., 19(5), 04014007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000570.
  4. Bruneau, M., Chang, S.E., Eguchi, R.T., Lee, G.C., O'Rourke, T.D., Reinhorn, A.M. and Von Winterfeldt, D. (2003), "A framework to quantitatively assess and enhance the seismic resilience of communities", Earthq. Spectra, 19(4), 733-752. https://doi.org/10.1193/1.1623497.
  5. Cao, S., Ozbulut, O., Wu, S., Sun, Z. and Deng, J. (2020), "Multilevel SMA/rubber bearing isolation system for seismic protection of bridges", Smart Mater. Struct., 29, 055045. https://doi.org/10.1088/1361- 665X/ab802b.
  6. Chen, X. and Li, C. (2020), "Seismic performance of tall pier bridges retrofitted with lead rubber bearings and rocking foundation", Eng. Struct., 212, 1-15. https://doi.org/10.1016/j.engstruct.2020.110529.
  7. Chen, X., Ding, M., Zhang, X., Liu, Z. and Ma, H. (2018), "Experimental investigation on seismic retrofit of gravity railway bridge pier with CFRP and steel materials", Construct. Build. Mater., 182, 371-384. https://doi.org/10.1016/j.conbuildmat.2018.06.102.
  8. Chen, X., Xia, X., Zhang, X. and Gao, J. (2020), "Seismic performance and design of bridge piers with rocking isolation", Struct. Eng. Mech., 73(4), 447-454. https://doi.org/10.12989/sem.2020.73.4.447.
  9. Chen, Y., Larkin, T. and Chouw, N. (2017), "Experimental assessment of contact forces on a rigid base following footing uplift", Earthq. Eng. Struct. Dyn., 46(11), 1835-1854. https://doi.org/10.1002/eqe.2885.
  10. Chen, Y.H., Liao, W.H., Lee, C.L. and Wang, Y.P. (2006), "Seismic isolation of viaduct piers by means of a rocking mechanism", Earthq. Eng. Struct. Dyn., 35, 713-736. https://doi.org/10.1002/eqe.555.
  11. Cheng, C.T. (2007), "Energy dissipation in rocking bridge piers under free vibration tests", Earthq. Eng. Struct. Dyn., 36(4), 503-518. https://doi.org/10.1002/Eqe.640.
  12. Cheng, C.T. (2008). "Shaking table tests of a self-centering designed bridge substructure", Eng. Strut., 30(12), 3426-3433. https://doi.org/10.1016/j.engstruct.2008.05.017.
  13. Cormack, L.G. (1998), "The design and construction of the major bridges on the Mangaweka Rail deviation", Transact. Institute Professional Eng. New Zealand, 15, 6-23.
  14. Dezfuli, F.H. and Alam, M.S. (2014), "Performance-based assessment and design of FRP-based high damping rubber bearing incorporated with shape memory alloy wires", Eng. Struct., 61, 166-183. https://doi.org/10.1016/J.ENGSTRUCT.2014.01.008.
  15. Dimitrakopoulos, E.G. and DeJong, M. (2012), "Overturning of retrofitted rocking structures under pulse-type excitations", J. Eng. Mech., 138, 963-972. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000410.
  16. Gazetas, G. (1983), "Analysis of machine foundation vibrations: State of the art", Int. J. Soil Dyn. Earthq. Eng., 2(1), 2-41. https://doi.org/10.1016/0261-7277(83)90025-6.
  17. GB/T50081 (2002), Standard for Test Method of Mechanical Properties on Ordinary Concrete, Ministry of Housing and Urban-Rural Construction of China, Beijing, China.
  18. Guan, Z., Chen, X. and Li, J. (2018), "Experimental investigation of the seismic performance of bridge models with conventional and rocking pile group foundations", Eng. Struct., 168, 889-902. https://doi.org/10.1016/j.engstruct.2018.03.021.
  19. Han, Q., Jia, Z., Xu, K., Zhou, Y. and Du, X. (2019), "Hysteretic behavior investigation of self-centering double-column rocking piers for seismic resilience", Eng. Struct., 188, 218-232. https://doi.org/10.1016/j.engstruct.2019.03.024.
  20. Housner, G.W. (1963), "The behavior of inverted pendulum structures during earthquakes", Bull. Seismol. Soc. Amer., 53(2), 403-417. https://doi.org/10.1785/BSSA0530020403.
  21. Jia, J., Zhang, K., Saiidi, M.S., Guo, Y., Wu, S., Bi, K. and Du, X. (2019), "Seismic evaluation of precast bridge columns with built-in elastomeric pads", Soil Dyn. Earthq. Eng., 128, 105868. https://doi.org/10.1016/j.soildyn.2019.105868.
  22. Jia, J., Zhang, K., Wu, S., Guo, Y., Du, X. and Wang, X. (2020), "Seismic performance of self-centering precast segmental bridge columns under different lateral loading directions", Eng. Struct., 221, 111037. https://doi.org/10.1016/j.engstruct.2020.111037.
  23. Jiao, C., Liu, W., Wu, S., Gui, X., Huang, J., Long, P. and Li, W. (2021a), "Shake table experimental study of curved bridges with consideration of girder-to-girder collision", Eng. Struct., 237, 112216. https://doi.org/10.1016/j.engstruct.2021.112216.
  24. Jiao, C., Liu, Y., Wu, S., Ma, Y., Huang, J. and Liu, W. (2021b), "Influence of pounding buffer zone for mitigation of seismic response of curved bridges", Struct., 32, 127-148. https://doi.org/10.1016/j.istruc.2021.02.046.
  25. Kelly, J.M. and Konstantinidis, D. (2011), Mechanics of Rubber Bearings for Seismic and Vibration Isolation, John Wiley & Sons, New York, NY, U.S.A.
  26. Kibriya, L.T., Malaga-Chuquitaype, C., Kashani, M.M. and Alexander, N.A. (2018), "Nonlinear dynamics of self-centring rocking steel frames using finite element models", Soil Dyn. Earthq. Eng., 115, 826-837. https://doi.org/10.1016/j.soildyn.2018.09.036.
  27. Makris, N. and Vassiliou, M.F. (2013), "Planar rocking response and stability analysis of an array of free-standing columns capped with a freely supported rigid beam", Earthq. Eng. Struct. Dyn., 42, 431-449. https://doi.org/10.1002/eqe.2222.
  28. Mander, J.B. and Cheng, C.T. (1997), Seismic Resistance of Bridge Piers Based on Damage Avoidance Design, Technical Report NCEER 97-0014, State University of New York, Buffalo, NY.
  29. Marriott, D., Pampanin, S. and Palermo, A. (2009), "Quasi-static and pseudo-dynamic testing of unbonded post-tensioned rocking bridge piers with external replaceable dissipaters", Earthq. Eng. Struct. Dyn., 38(3), 331-354. https://doi.org/10.1002/Eqe.857.
  30. Marriott, D., Pampanin, S. and Palermo, A. (2011), "Biaxial testing of unbonded post-tensioned rocking bridge piers with external replacable dissipaters", Earthq. Eng. Struct. Dyn., 40(15), 1723-1741. https://doi.org/10.1002/eqe.1112.
  31. McKenna, F., Fenves, G.L. and Scott, M.H. (2000), Open System for Earthquake Engineering Simulation (OpenSees), University of California: Berkeley, CA, America. http://opensees.berkeley.edu.
  32. Monzon, E., Buckle, I.G. and Itani, A. (2016), "Seismic performance and response of seismically isolated curved steel I-girder bridge", J. Struct. Eng., 142(12), 04016121. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001594.
  33. Ou, Y., Chiewanichakorn, M., Aref, A.J. and Lee, G.C. (2007), "Seismic performance of segmental precast unbonded posttensioned concrete bridge columns", J. Struct. Eng., 133. 1636-1647. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1636).
  34. Ou, Y., Wang, P., Tsai, M., Chang, K. and Lee. GC. (2010), "Large-scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic regions", J. Struct. Eng., 136, 255-264. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000110.
  35. Ozdemir, G., Bayhan, B. and Gulkan, P. (2018), "Variations in the hysteretic behavior of LRBs as a function of applied loading", Struct. Eng. Mech. ,67(1), 69-78. https://doi.org/10.12989/sem.2018.67.1.069.
  36. Palermo, A. and Pampanin, S. (2008), "Enhanced seismic performance of hybrid bridge systems: comparison with traditional monolithic solutions", J. Earthq. Eng., 12, 1267-1295. https://doi.org/10.1080/13632460802003819.
  37. Palermo, A., Pampanin, S. and Calvi, G.M. (2005), "Concept and development of hybrid solutions for seismic resistant bridge systems", J. Earthq. Eng., 9(6), 899-921. https://doi.org/10.1080/13632460509350571.
  38. Palermo, A., Pampanin, S. and Marriott, D. (2007), "Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections", J. Struct. Eng., 133, 1648-1661. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1648).
  39. Paola, M.D., Mendola, L.L. and Navarra, G. (2007), "Stochastic seismic analysis of structures with nonlinear viscous dampers", J. Struct. Eng., 133, 1475-1488. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1475)
  40. Pecker, A. (2004), "Design and construction of the Rion Antirion Bridge", In Geotechnical Engineering for Transportation Projects, Proceedings of Geo-Trans, Los Angeles, California, July.
  41. Pollino, M. and Bruneau, M. (2004), "Seismic retrofit of bridge steel truss pier anchorage connections", The 13th World Conference on Earthquake Engineering, Vancouver, Canada.
  42. Psycharis, I.N. and Jennings, P.C. (1983), "Rocking of slender rigid bodies allowed to uplift", Earthq. Eng. Struct. Dyn., 11, 57-76. https://doi.org/10.1002/eqe.4290110106.
  43. Ray, T., Reinhorn, A.M. and Nagarajaiah, S. (2013), "Nonlinear elastic and inelastic spectra with inherent and supplemental damping", Earthq. Eng. Struct. Dyn., 42, 2151-2165. https://doi.org/10.1002/EQE.2318.
  44. Solberg, K., Mashiko, N., Mander, J.B. and Dhakal, R.P. (2009), "Performance of a damage-protected highway bridge pier subjected to bidirectional earthquake attack", J. Struct. Eng., 135, 469-478. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:5(469).
  45. Thiers-Moggia, R. and Malaga-Chuquitaype, C. (2019), "Seismic protection of rocking structures with inerters", Earthq. Eng. Struct. Dyn., 48, 528-547. https://doi.org/10.1002/eqe.3147.
  46. Tsionis, G. (2014), "Seismic resilience: concept, metrics and integration with other hazards", JRC91951, Luxembourg: Publications Office of the European Union.
  47. Vassiliou, M.F. and Makris, N. (2012), "Analysis of the rocking response of rigid blocks standing free on a seismically isolated base", Earthq. Eng. Struct. Dyn., 41(2), 177-196. https://doi.org/10.1002/eqe.1124.
  48. Wang, X., Wu, S., Jia, J., Li, H., Wei, Y., Zhang, K. and Bai, Y. (2021), "Experimental evaluation of seismic performance of corroded precast RC bridge columns and the retrofit measure using CFRP jackets", Eng. Struct., 245, 112872. https://doi.org/10.1016/j.engstruct.2021.112872.
  49. Wei, B., Wang, P., He, X. and Jiang, L. (2018b), "The impact of the convex friction distribution on the seismic response of a spring-friction isolation system", KSCE J. Civil Eng., 22(4), 1203-1213. https://doi.org/10.1007/s12205-017-0938-6
  50. Wei, B., Wang, P., Yang, M. and Jiang, L. (2017), "Seismic response of rolling isolation systems with concave friction distribution", J. Earthq. Eng., 21(2), 325-342. https://doi.org/10.1080/13632469.2016.1157530.
  51. Wei, B., Yang, T., Jiang, L. and He, X. (2018a), "Effects of friction-based fixed bearings on the seismic vulnerability of a high-speed railway continuous bridge", Advan. Struct. Eng., 21(5), 643-657. https://doi.org/10.1177/1369433217726894.
  52. Wu, S., Buckle, I.G., Itani, A.M. and Istrati, D. (2019a), "Experimental studies on seismic response of skew bridges with seat-type abutments. I: shake table experiments", J. Bridge Eng., 24(10), 04019096. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001480.
  53. Wu, S., Buckle, I.G., Itani, A.M. and Istrati, D. (2019b), "Experimental studies on seismic response of skew bridges with seat-type abutments. II: results", J. Bridge Eng., 24(10), 04019097. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001469.
  54. Xia, X., Wu, S., Shi, J., Jia, J., Chen, X. and Ma, H. (2020), "Seismic response of rocking isolated railway bridge piers with sacrificial components", Earthq. Eng. Eng. Vib., 19, 1005-1015. https://doi.org/10.1007/s 11803-020-0610-x.
  55. Xie, Y., Zhang, J., DesRoches, R. and Padgett, J.E. (2019), "Seismic fragilities of single-column highway bridges with rocking column-footing", Earthq. Eng. Struct. Dyn., 48, 843-864. https://doi.org/10.1002/eqe.3164.
  56. Yamamoto, M., Minewaki, S., Yoneda, H. and Higashino. M, (2012), "Nonlinear behavior of high damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling", Earthq. Eng. Struct. Dyn., 41, 1845-1860. https://doi.org/10.1002/eqe.2161.
  57. Yim, C.S., Chopra, A.K. and Penzien, J. (1980), "Rocking response of rigid blocks to earthquake", Earthq. Eng. Struct. Dyn., 8(6), 565-587. https://doi.org/10.1002/eqe.4290080606.
  58. Zhang, J. and Makris, N. (2001), "Rocking response of free-standing blocks under cycloidal pulses", J. Eng. Mech., 127, 473-483. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:5(473).

피인용 문헌

  1. Cyclic performance of different mitigation strategies proposed for segmental precast bridge piers vol.36, 2021, https://doi.org/10.1016/j.istruc.2021.12.020