Earthquakes and Structures

  • 제21권2호
  • /
  • Pages.113-124
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Component deformation-based collapse evaluation of RC frame under different collapse criteria

  • Huang, Difang (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Han, Xiaolei (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Qiao, Shengfang (Guangzhou Institute of Building Science Co., Ltd.) ;
  • Ji, Jing (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Cui, Jidong (RBS Architectural Engineering Design Associates)
  • 투고 : 2020.06.13
  • 심사 : 2021.05.11
  • 발행 : 2021.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Developments in performance-based earthquake engineering have emphasized the importance of evaluation of structural collapse resistance. Several collapse criteria were proposed to define structural collapse in various perspective. In this paper, collapse resistant capacity of ductile reinforced concrete (RC) frame was evaluated using different collapse criteria. Since most of the criteria focus on overall structural response, a component deformation-based method was adopted to describe the damage in component level. Incremental dynamic analysis (IDA) of a 6-story ductile RC frame conforms to current codes was conducted in OpenSEES. The collapse resistant capacity under different collapse criteria was compared. Moreover, relationship between overall structural response and the distribution of damaged components were discussed through the component deformation-based method. It was indicated that the story of maximum inter-story drift ratio is neither consistent with the one which is most seriously damaged nor with the story of maximum residual inter-story drift ratio. Furthermore, the component deformation-based method can depict structural damaged state and formation of collapse mechanism more reasonably. The analysis result evidences that structure conforms to current code have the good ductility and hardly reaches physical collapse under rare earthquake, however, the structure is more likely to be demolished due to unacceptable residual deformation.

키워드

과제정보

The research described in this paper is financially supported by Natural Science Foundation of Guangdong Province (2020A1515010739), Science and Technology Program of Guangzhou (202103000038) and China Postdoctoral Science Foundation (2019M662917).

참고문헌

  1. Acun, B. and Sucuoglu, H. (2010), "Performance of reinforced concrete columns designed for flexural under severe displacement cycles", ACI Struct. J., 107(3), 364-371. https://doi.org/10.14359/51663702
  2. ASCE 41-17 (2017), Seismic Evaluation and Retrofit Rehabilitation of Existing Building, American Society of Civil Engineers; Reston, Virginia, U.S.A.
  3. ASCE 7-10 (2010), Minimum Design Loads for Buildings and Other Structures. American Society of Civil Engineers; Reston, Virginia, U.S.A.
  4. ASCE/SEI 41-06 (2007), Seismic Rehabilitation of Existing Buildings. American Society of Civil Engineers; Reston, Virginia, U.S.A.
  5. Aydemir, M.E. and Aydemir, C. (2019), "Residual displacement estimation of simple structures considering soil structure interaction", Earthq. Struct., 16(1), 69-82. https://doi.org/10.12989/eas.2019.16.1.069
  6. Banon, H. and Veneziano, D. (1986), "Seismic safety of reinforced concrete members and structures", Earthq. Eng. Struct. Dyn., 10(2), 179-193. https://doi.org/10.1002/eqe.4290100202.
  7. Bayati, Z. and Soltani, M. (2016), "Ground motion selection and scaling for seismic design of RC frames against collapse", Earthq. Struct., 11(3), 445-459. https://doi.org/10.12989/eas.2016.11.3.445
  8. Cui, J. (2017), Research and Experimental Verification of Deformation Index Limits of RC Beams, Columns and Shear Walls", Ph.D. Dissertation, South China University of Technology, Guangzhou, China.
  9. Cui, J.D. Han, X.L. Ji, J. and Gong, H.J. (2018a), "Experimental study on deformation limits of RC beams", J. Harbin Institut Technol., 50(6), 169-176. https://doi.org/10.11918/j.issn.0367-6234.201706082.
  10. Cui, J.D., Han, X.L., Gong, H.J. and Ji, J. (2018b), "Deformation limits of reinforces concrete columns and their experimental verification", J. Tongji Univ. (Nat. Sci.), 46(5), 593-603. https://doi.org/10.11908/j.issn.0253-374x.2018.05.005.
  11. Dai, K., Wang, J., Li, B. and Hong, H.P. (2017), "Use of residual drift for post-earthquake damage assessment of RC buildings", Eng. Struct., 147, 242-255. https://doi.org/10.1016/j.engstruct.2017.06.001
  12. Elwood, K.J. (2013), "Performance of concrete buildings in the 22 February 2011 Christchurch earthquake and implications for Canadian codes", Canadian J. Civil Eng., 40, 759-776. https://doi.org/10.1139/cjce-2011-0564
  13. FEMA P-58 (2012), Seismic Performance Assessment of Buildings, Federal Emergency Management Agency; Washington, U.S.A.
  14. FEMA P-695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, U.S.A.
  15. GB50011-2010 (2016), Code for Seismic Design of Buildings, Ministry of Housing and Urban-Rural Development of the People's Republic of China, Beijing, China.
  16. Gu, X. and Du, F. (2002), Computer Simulation of Concrete Structures. Tongji University Press, Shanghai, China.
  17. Gu, X. and Shen, Z. (1997), "Damage analysis of reinforced concrete structures under earthquake series", Proceedings of the 7th International Conference on Computing in Civil and Building Engineering. Seoul, Korea.
  18. Han, X., Huang, D., Ji, J. and Lin, J. (2019), "Component deformation-based seismic design method for RC structure and engineering application", Earthq. Struct., 16(5), 575-588. https://doi.org/10.12989/eas.2019.16.5.575
  19. Haselton, C.B., Liel, A.B. and Deierlein, G.G., Dean, B.S. and Chou, J.H. (2011), "Seismic collapse safety of reinforced concrete buildings. I: Assessment of ductile moment frames", J. Struct. Eng., 137(4), 481-491. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000318
  20. Hatzigeorgiou, G.D., Papagiannopoulos, G.A. and Beskos, D.E. (2011), "Evaluation of maximum seismic displacements of SDOF systems from their residual deformation", Eng. Struct., 33, 3422-3431. https://doi.org/10.1016/j.engstruct.2011.07.006.
  21. Kam, W.Y., Pampanin, S. and Elwood K. (2011), "Seismic performance of reinforced concrete building in the 22 February Christchurch (Lyttelton) earthquake", Bull. New Zealand Soc. Earthq. Eng., 44(4), 239-278. https://doi.org/10.5459/bnzsee.44.4.239-278.
  22. Li, L., Li, H. and Li, C. (2018), "Seismic fragility assessment of self-centering RC frame structures considering maximum and residual deformations", Struct. Eng. Mech., 68(6), 677-689. https://doi.org/10.12989/sem.2018.68.6.677.
  23. Lu, X., Ye, L., Ma, Y. and Tang, D. (2012), "Lessons from the collapse of typical RC frames in Xuankou school during the great Wenchuan earthquake", Advan. Struct. Eng., 15(1), 139-153. https://doi.org/10.1260/1369-4332.15.1.139.
  24. Mohd, M.Z. and Sangle, K.K. (2017), "Seismic damage assessment of reinforced concrete structure using non-linear static analyses", KSCE J. Civil Eng., 21(4), 1319-1330. https://doi.org/10.1007/s12205-016-0541-2
  25. OpenSEES. (2013), Open System for Earthquake Engineering Simulation, Berkeley, CA: Pacific Earthquake Engineering Research Center, University of California. (http://opensees.-berkeley.edu.)
  26. Parrotta, J.E., Peiretti, H.C., Gribniak, V. and Caldentey, A.P. (2014), "Investigating deformations of RC beams: experimental and analytical study", Comput. Concrete, 13(6), 799-827. https://doi.org/10.12989/cac.2014.13.6.799
  27. Pettinga, D., Christopoulos, C., Pampanin, S. and Priestley, N. (2007), "Effectiveness of simple approaches in mitigating residual deformations in buildings", Earthq. Eng. Struct. Dyn., 36, 1763-1783. https://doi.org/10.1002/eqe.717
  28. Qi, Y. (2013), Research on Deformation Limits of RC Beams, Columns and Shear Walls Based on Material Strain, Ph.D. Dissertation, South China University of Technology, Guangzhou, China.
  29. Qiao, S.F., Han, X.L., Li, W.C. and Zhou, K.M. (2017), "Conceptual configuration and seismic performance of high-rise steel braced frame", Steel Compos. Struct., 23(2), 173-186. https://doi.org/10.12989/scs.2017.23.2.173.
  30. Ramirez, C.M. and Miranda, E. (2012), "Significance of residual drifts in building earthquake loss estimation", Earthq. Eng. Struct. Dyn., 41(11), 1477-1493. https://doi.org/10.1002/eqe.2217.
  31. Ricci, P., Verderame, G. and Manfredi, G. (2012), "ASCE/SEI 41 provisions on deformation capacity of older-type reinforced concrete columns with plain bars", J. Struct. Eng., 139(12), 04013014. https://doi.org/10.1061/(asce)st.1943-541x.0000701.
  32. Roufaiel M.S. and Meyer C. (1987), "Analytical model of hysteretic behavior of RC frames", J. Struct. Eng., 113(3), 429-444. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:3(429).
  33. Ruiz-Garc'ia, J. and Miranda, E. (2006), "Evaluation of residual drift demands in regular multi-storey frames for performance-based seismic assessment", Earthq. Eng. Struct. Dyn., 35, 1609-1629. https://doi.org/10.1002/eqe.593.
  34. Ruiz-Pinilla, J.G., Adam, J.M., Perez-Carcel, R. Yuste, J. and Moragues, J.J. (2016), "Learning from RC building structures damaged by the earthquake in Lorca, Spain, in 2011", Eng. Fail. Analy., 68, 76-86. https://doi.org/10.1016/j.engfailanal.2016.05.013
  35. Sezen, H. and Moehle, J.P. (2004), "Shear strength model for lightly reinforced concrete columns", J. Struct. Eng., 130(11), 1692-1703. https://doi.org/10.1061/(asce)0733-9445(2004)130:11(1692)
  36. Shoraka, M.B., Yang, T.Y. and Elwood, K.J. (2013), "Seismic loss estimation of non-ductile reinforced concrete buildings", Earthq. Eng. Struct. Dyn., 42(2), 297-310. https://doi.org/10.1002/eqe.2213.
  37. Siahos, G. and Dritsos, S. (2010), "Procedural assumption comparison for old buildings via pushover analysis including the ASCE 41 update", Earthq. Spectra, 26(1), 187-208. https://doi.org/10.1193/1.3272266.
  38. Sozen, M.A. and Loopez, R.R. (1987), "RC frame drift for 1985 Mexico earthquake", The Mexico Earthquakes-1985: Factors Involved and Lessons Learned, Mexico City, September.
  39. Tian, Y., Lu, X., Lu, X.Z., Li, M.K. and Guan, H. (2016), "Quantifying the seismic resilience of two tall buildings designed using Chinese and US Codes", Earthq. Struct., 11(6), 925-942. https://doi.org/10.12989/eas.2016.11.6.925.
  40. Vamvatsikos, D. and Cornell, C. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.