Geomechanics and Engineering

  • 제26권2호
  • /
  • Pages.205-214
  • /
  • 2021
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of underground stress transfer through artificial manipulation of particle size distribution

  • 투고 : 2020.12.18
  • 심사 : 2021.07.13
  • 발행 : 2021.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

To maintain the stability of built structures, engineers employ various methods to increase ground strength. One such method is to exert mutual physical force upon a structure, thereby stabilizing it without external reinforcement. Typical examples include the stone mastic asphalt method and torsional structured stonework. By simulating a structural phenomenon, it is possible to increase the ground's strength simply by manipulating the distribution and spatial arrangement of soil particles; soil composed of two differently sized particles satisfying a specific ratio does not separate easily. The jamming of soil particles utilizes Plato's regular polyhedron model and assumes that soil particles are complete spheres. Larger soil particles are placed at each vertex of a regular polyhedron and smaller particles in the voids' center. All soil particles come into contact with each other, thereby inducing an interlocking effect. When applied to soil, the particle size distribution is found to be gap-graded. This study investigates this mechanism by using numerical analysis and centrifuge tests to initiate the interlocking effect by distributing gap-graded particles and conducting plate-load tests to verify the ground reinforcement effect.

키워드

과제정보

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (No. 2019R1A2B5B01069992).

참고문헌

  1. Alias, R., Kasa, A. and Taha, M.R. (2014), "Particle size effect on shear strength of granular materials in direct shear test", World Acad. Sci. Eng. Technol., Int. J. Civ. Environ. Struct. Construct. Architect. Eng., 8(11), 1093-1096.
  2. Cho, G.C., Dodds, J. and Santamarina, J.C. (2006), "Particle shape effects on packing density, stiffness, and strength: Natural and crushed sands", J. Geotech. Geoenviron. Eng., 591-602. https://doi.org/10.1061/(ASCE)10900241(2006)132:5(591).
  3. Itasca Consulting Group Inc. (1999), PFC2D Particle Flow Code in 2 Dimensions, Minneapolis: Itasca.
  4. Kamura, J.J. and Hayano, K. (2016), "Importance of particle shape on stress-strain behavior of crushed stone-sand mixtures", Geomech. Eng., 10(4), 455-470. https://doi.org/10.12989/gae.2016.10.4.455.
  5. Nikadat, N. and Marji, M.F. (2016), "Analysis of stress distribution around tunnels by hybridized FSM and DDM considering the influences of joints parameters", Geomech. Eng., 11(2), 269-288. https://doi.org/10.12989/gae.2016.11.2.269.
  6. Oda, M. (1977), "Co-ordination number and its relation to shear strength of granular material", Japan. Soc. Soil Mech. Found. Eng., 17(2), 29-42. https://doi.org/10.3208/sandf1972.17.2_29.
  7. Saride, S., Pradhan, S., Sitharam, T.G. and Pippala A.J. (2013), "Numerical analysis of geocell reinforced ballast overlying soft clay subgrade", Geomech. Eng., 5(3), 263-281. https://doi.org/10.12989/gae.2013.5.3.263.
  8. Shen, D.H., Kuo, M.F., Du, J.C., (2005), "Properties of gap-aggregate gradation asphalt mixture and permanent deformation", Construct. Build. Mater., 19, 147-153. https://doi.org/10.1016/j.conbuildmat.2004.05.005.
  9. Siemens, A.O.N. and Hecke, M.V. (2010), "Jamming: A simple Introduction", PhtsicaA, 389, 4255-4264. https://doi.org/10.1016/j.physa.2010.02.027.
  10. Takao, U., Takashi, M. and Yasuo, Y., (2011), "Effect of particle size ratio and volume fraction on shear strength of binary granular mixture", Granular Matter, 6(13), 731-742. https://doi.org/10.1007/s10035-011-0292-1.
  11. Ukritchon, B., Faustino, J.C. and Keawsawasvong, F.S. (2016), "Numerical investigations of pile load distribution in pile group foundation subjected to vertical load and large moment", Geomech. Eng., 10(5), 577-598. https://doi.org/10.12989/gae.2016.10.5.577.
  12. Vallejo, L.E. and Chik, Z. (2009), "Fractal and laboratory analyses of the crushing and abrasion of granular materials", Geomech. Eng., 1(4), 323-335. https://doi.org/10.12989/gae.2009.1.4.323.
  13. Viggiani, G., Kuntz, M. and Desrues, J. (2001), "An experimental investigation of the relationships between grain size distribution and shear banding in sand", Part Lecture Notes Physics Book Series, 568, 111-127. https://doi.org/10.1007/s10035-011-0292-1.
  14. Wang, Z., Ruiken, A., Jacobs, F. and Ziegler, M., (2014), "A new suggestion for determining 2D porosities in DEM studies", Geomech. Eng., 7(6), 665-678. https://doi.org/10.12989/gae.2014.7.6.665.
  15. Xin, Z.H., Moon, J.H., Kim, L.S., Kim, G.B. and Kim, Y.U. (2016), "Effect of arbitrarily manipulated gap-graded granular particles on reinforcing foundation soil", Geomech. Eng., 17(5), 439-444. https://doi.org/10.12989/GAE.2019.17.5.439
  16. Yagiz, S. (2001), "Brief note on the influence of shape and percentage of gravel on the shear strength of sand and gravel mixtures", B. Eng. Geolog. Environ., 60(4), 321-323. https://doi.org/10.1007/s100640100122.