DOI QR코드

DOI QR Code

Post-earthquake fire resistance of tall steel concentrically braced frames

  • Kaffash, Rasul (Department of Civil Engineering, Ferdowsi University of Mashhad) ;
  • Karamodin, Abbas (Department of Civil Engineering, Ferdowsi University of Mashhad)
  • 투고 : 2020.04.08
  • 심사 : 2021.06.07
  • 발행 : 2021.07.25

초록

The fire which occurs after an earthquake causes great problems for buildings situated in moderate to high seismic regions. In this article in order to have an understanding regarding the impacts of post-earthquake fire on the structures, implementing the finite element method, the behaviour of tall steel concentrically braced frames when subjected to this type of loading was investigated. The simulation under seismic loading was done using the nonlinear time history analysis. Assuming the post-earthquake situation of the structure as the initial condition, the mechanical-thermal analysis was applied using the temperature-time diagram on the exposed elements. The analysis results showed that regardless of the earthquake record and fire scenarios for the tall steel concentrically braced frames, the fire resistance duration was short and the impacts of the previous earthquake on the structure fire resistance were not considerable.

키워드

참고문헌

  1. EN 1991-1-2 (2002), Eurocode1: Action on Structures - Part 1-2: General Actions - Actions on Structures Exposed to Fire, European Committee for Normalization, Brussels, Belgium.
  2. ANSI/AISC 341-05 (2005), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, U.S.A.
  3. ANSI/AISC 360-05 (2005), Specifications for Structural Steel Buildings, American Institute of Steel Construction, Chicago, U.S.A
  4. ASCE 7-05 (2005), Minimum design Loads for Buildings and Other Structures, American Society of Civil Engineers, Virginia, U.S.A.
  5. EN 1993-1-2 (2005), Eurocode3: Design of Steel Structures, Part1-2: General Rules-Structural Fire Design, European Committee for Normalization, Brussels, Belgium.
  6. AISC Steel Construction Manual (2006), American Institute of Steel Construction, Chicago, U.S.A.
  7. International Building Code (IBC) (2006), International Code Council.
  8. ASCE/SEI 41-06 (2007), Seismic Rehabilitation of Existing Buildings, ASCE Reston, VA,
  9. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, U.S.A.
  10. ANSI/AISC 360-10 (2010), Specifications for Structural Steel Buildings, American Institute of Steel Construction, Chicago, U.S.A.
  11. ASCE 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Virginia, U.S.A.
  12. Almand, K., Phan, L., McAllister, T., Starnes, M. and Gross, J. (2004), NET-SFPE Workshop for Development of a National R&D Roadmap for Structural Fire Safety Design and Retrofit of Structures, National Institute of Standards and Technology.
  13. Arasaratnam, P., Sivakumaran, K.S. and Tait, M.J. (2011), True Stress-True Strain Models for Structural Steel Elements, International Scholarly Research Notices.
  14. Behnam, B. (2016), Post-Earthquake Fire Analysis in Urban Structures, CRC Press, Boca Raton.
  15. Behnam, B. (2016), "Structural response of vertically irregular tall moment-resisting steel frames under pre- and post-earthquake fire", Struct. Des. Tall Spec. Build.. 25(12), 543-557. https://doi.org/10.1002/tal.1271.
  16. Behnam, B. and Ronagh, H.R. (2013), "Post-earthquake fire performance-based behavior of reinforced concrete structures", Earthq. Struct., 5(4) 379-394. https://doi.org/10.12989/eas.2013.5.4.379.
  17. Behnam, B. and Ronagh, H.R. (2014), "Behavior of momentresisting tall steel structures exposed to a vertically traveling post-earthquake fire", Struct. Des. Tall Spec. Build., 23(14), 1083-1096. https://doi.org/10.1002/tal.1109.
  18. Dassault Systemes Simulia Corp (2014), ABAQUS 6.14 Documentation, Dassault Systemes Simulia Corp, RI, U.S.A.
  19. Della Corte, G., Faggiano, B. and Mazzolani, F. (2005), "On the structural effects of fire following an earthquake", Improvement of Building's Structural Quality by new Technologies-COST C12 Final Conference Proceedings, Taylor and Francis, London.
  20. Faggiano, B., De Gregorio, D. and Mazzolani, F. (2010), "Assessment of the robustness of structures subjected to fire following earthquake through a performance-based approach", Proc. Int. Conference Urban habitat constructions under catastrophic events (COST C26 Action), Naples, Italy.
  21. Faggiano, B., Esposto, M. and Mazzolani, F. (2007), "Fire analysis on steel portal frames damaged after earthquake according to performance based design", Proceedings Workshop Urban Habitat Construction under Catastrophic Events, Czech Republic.
  22. Ghosh, S.K. (2006), Assessing Ability of Seismic Structural Systems to Withstand Progressive Collapse: Design of Steel Braced Frame Buildings, The National Institute of Standards and Technology.
  23. Gupta, A. and Krawinkler, H. (1999), Seismic Demands for Performance Evaluation of Steel Moment Resisting Frame Structures, Dept. of Civil and Environmental Engineering Stanford Univ.
  24. Harris, J. and Speicher, M. (2015), Assessment of First Generation Performance-Based Seismic Design Methods for New Steel Buildings, Volume 3: Eccentrically Braced Frames, Technical Note (NIST TN), National Institute of Standards and Technology, Gaithersburg. https://doi.org/10.6028/NIST.TN.1863-3
  25. Hsu, T.Y. and Pham, Q.V. (2019), "Post-earthquake assessment of buildings using displacement and acceleration response", Earthq. Struct., 17(6), 599-609. https://doi.org/10.12989/eas.2019.17.6.599.
  26. Hsiao, P.C., Lehman, D.E. and Roeder, C.W. (2012), "Improved analytical model for special concentrically braced frames", J. Construct. Steel Res., 73, 80-94, https://doi.org/10.1016/j.jcsr.2012.01.010.
  27. Jelinek, T., Zania, V. and Giuliani, L. (2017), "Post-earthquake fire resistance of steel buildings", J. Construct. Steel Res., 138, 774-782. https://doi.org/10.1016/j.jcsr.2017.08.021
  28. Memari, M., Mahmoud, H. and Ellingwood, B. (2014), "Postearthquake fire performance of moment resisting frames with reduced beam section connections", J. Construct. Steel Res., 103, 215-229. https://doi.org/10.1016/j.jcsr.2014.09.008.
  29. Okazaki, T., Lignos, D.G., Hikino, T. and Kajiwara, K. (2013), "Dynamic response of a chevron concentrically braced frame", J. Struct. Eng., 139(4), 515-525. https://doi.org/10.1061/(asce)st.1943-541x.0000679.
  30. Pantousa, D. and Mistakidis, E. (2016), "Fire-after-earthquake resistance of steel structures using rotational capacity limits", Earthq. Struct., 10(4), 867-891. https://doi.org/10.12989/eas.2016.10.4.867
  31. Quiel, S.E. and Garlock, M.E. (2008), "Modeling high-rise steel framed buildings under fire", In Structures Congress 2008: Crossing Borders.
  32. Rackauskaite, E., Kotsovinos, P., Jeffers, A. and Rein, G. (2017), "Structural analysis of multi-storey steel frames exposed to travelling fires and traditional design fires", Eng. Struct., 150, 271-287. https://doi.org/10.1016/j.engstruct.2017.06.055.
  33. Rubert, A. and Schaumann, P. (1985), "Tragverhalten stahlerner Rahmensysteme bei Brandbeanspruchung", Stahlbau. 54, 280-287
  34. Ryder, N., Wolin, S. and Milke, J. (2002), "An investigation of the reduction in fire resistance of steel columns caused by loss of spray-applied fire protection", J. Fire Protection Eng., 12(1), 31-44. https://doi.org/10.1177/1042391502012001865
  35. Scawthorn, C., Eidinger, J.M. and Schiff, A. (2005), Fire Following Earthquake, American Society of Civil Engineers (ASCE), Reston, Virginia, U.S.A.
  36. Sun, R., Huang, Z. and Burgess, I.W. (2012), "Progressive collapse analysis of steel structures under fire conditions", Eng. Struct., 34, 400-413. https://doi.org/10.1016/j.engstruct.2011.10.009.
  37. Suwondo, R., Gillie, M., Cunningham, L. and Bailey, C. (2018), "Effect of earthquake damage on the behaviour of composite steel frames in fire", Advan. Struct. Eng., 21(16), 2589-2604. https://doi.org/10.1177/1369433218761138
  38. Uriz, P. (2005), Towards Earthquake Resistant Design of Concentrically Braced Steel Structures, University of California, Berkeley, California.
  39. Wang, W.Y. and Li, G.Q. (2009), "Fire-resistance study of restrained steel columns with partial damage to fire protection", Fire Safety J., 44(8), 1088-1094. https://doi.org/10.1016/j.firesaf.2009.08.002.
  40. Zaharia, R. and Pintea, D. (2009), "Fire after earthquake analysis of steel moment resisting frames", Int. J. Steel Struct., 9(4), 275-284. https://doi.org/10.1007/bf03249501.