Earthquakes and Structures

  • 제21권1호
  • /
  • Pages.63-78
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Estimation of inter-story drifts at onset of damage states for RC high-rise buildings

  • Pejovic, Jelena R. (Faculty of Civil Engineering, University of Montenegro) ;
  • Serdar, Nina N. (Faculty of Civil Engineering, University of Montenegro)
  • 투고 : 2021.02.19
  • 심사 : 2021.05.17
  • 발행 : 2021.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a detailed probabilistic seismic damage analysis of RC high-rise buildings was performed and as a result, the damage states (DSs) and appropriate performance levels (PLs) were defined in a quantitative manner. DSs were quantified using inter-story drift, where the drifts were determined at the onset of each DS. The analysis was performed on three RC high-rise buildings: 20-story, 30-story and 40-story with core wall structural system. Probabilistic seismic damage analysis was performed for 60 earthquake records, recorded on rock and stiff soil, and scaled to two intensity levels associated with probability of exceedance, 10 % in 50 years - 475-year return period (10%/50) and probability of exceedance, 2 % in 50 years - 2475-year return period (2%/50). In addition to these analyses for estimation the damage index, nonlinear static pushover analyses (NSPAs) were performed using different modal combination patterns. Large deviations among the pushover curves for individual considered modal combination patterns were observed. In order to adequately select the parameters for calculating damage index, an analysis of drifts and shear forces for individual modal combination patterns was performed. The functional dependencies between inter-story drifts and damage index were derived using the regression analysis. Based on the derived dependencies, the values of inter-story drifts at the onset of considered DSs for high-rise buildings were proposed.

키워드

참고문헌

  1. Ambraseys, N., Smit, P., Sigbjornsson, R., Suhadolc, P. and Margaris, B. (2002), Internet-site for European strong-motion data, European Commission, Directorate-General XII, Environmental and Climate Programme; Brussels, Belgium. http://www.isesd.cv.ic.ac.uk.
  2. ASCE/SEI 41-06 (2007), Seismic Rehabilitation of Existing Buildings, American Society of Civil Engineers.
  3. Baetu S.A., Barbat A.H., Ciongradi I.P. and Baetu G. (2015), "Seismic damage evaluation of reinforced concrete buildings with slit walls", Eng. Comput., 32(6), 2015.
  4. Bayat, M., Daneshjoo, F. and Nistico N. (2015), "A novel proficient and sufficient intensity measure for probabilistic analysis of skewed highway bridges", Struct. Eng. Mech., 55(6), 1177-1202. https://doi.org/10.12989/sem.2015.55.6.1177
  5. Bayat, M., Daneshjoo, F., Nistico N. and Pejovic, J. (2017), "Seismic evaluation of isolated skewed bridges using fragility function methodology", Comput. Concrete, 20(4), 419-427. https://doi.org/10.12989/cac.2017.20.4.419
  6. Cai, J., Bu, G., Yang, C., Chen, Q. and Zuo, Z. (2016), "Calculation methods for inter-story drifts of building structures", Advan. Struct. Eng., 17(5), 735-745. https://doi.org/10.1260/1369-4332.17.5.735
  7. Chai Y.H., Romstad K.M. and Bird S.M. (1995), "Energy-based linear damage model for high-intensity seismic loading", J. Struct. Eng., 121(5), 857-864. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(857)
  8. Do, T.N. and Filippou, F.C. (2018), "A damage model for structures with degrading response", Earthq. Eng. Struct. Dyn., 47(2), 311-332. https://doi.org/10.1002/eqe.2952
  9. EN1992-1-1 (2004), Design of Concrete Structures. Part 1: General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  10. EN1998-1 (2004), Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  11. EN1998-2 (2005), Design of Structures for Earthquake Resistance Part 2: Bridges, European Committee for Standardization; Brussels, Belgium.
  12. Erberik, M.A. and Elnashai, A.S. (2004), "Fragility analysis of flat-slab structures", Eng. Struct., 26(2004) 937-948. https://doi.org/10.1016/j.engstruct.2004.02.012.
  13. Esteghamati, M.Z., Banazadeh, M. and Huang, Q. (2018), "The effect of design drift limit on the seismic performance of RC dual high-rise buildings", Struct. Des Tall Spec. Build., 27(2018), 1-16. https://doi.org/10.1002/tal.1464.
  14. ETABS (2013), ETABS 2013 Integrated Analysis, Design and Drafting of Buildings Systems, CSI Computers & Structures Inc.; Berkeley, U.S.A.
  15. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency.
  16. Ghobarah, A. (2004), "On drift limits associated with different damage levels", Proceedings of an International Workshop on Performance-Based Seismic Design Concepts and Implementation, Bled, Slovenia, 321-332.
  17. Guo, J., Wang, J.J., Li, Y., Zhao, W.G. and Du, Y.L. (2016), "Three dimensional extension for park and ang damage model", Struct., 7(2016), 184-194. https://doi.org/10.1016/j.istruc.2016.06.008
  18. Hazus-MH 2.1 (2012), Technical Manual - Multi-hazard Loss Estimation Methodology - Earthquake Model, National Institute of Building Sciences; Federal Emergency Management Agency, Washington DC.
  19. Huang, B., W. Lu, W., Chen, S. and Mosalam, K.M. (2017), "Drift demand of the outer-skin curtain wall system of the Shanghai Tower", Struct. Des Tall Spec. Build., 26(2017), 1-11. https://doi.org/10.1002/tal.1388.
  20. Ji, J., Elnashai, A.S and Kuchma, D.A. (2009), "Seismic fragility relationships for reinforced concrete high-rise buildings", Struct. Design Tall Spec. Build. 18(3), 259-277. https://doi.org/10.1002/tal.408
  21. Ji, J., Elnashai, A.S. and Kuchma, D.A. (2007), Seismic Fragility Assessment for Reinforced Concrete High-Rise Buildings, Research Report No. 07-14; Mid-America Earthquake Center, University of Illinois at Urbana-Champaign.
  22. Kunnath, S.K. (2004), "Identification of modal combinations for nonlinear static analysis of building structures", Comput. Civil Infrastruct. Eng., 19(2004) 246-259. https://doi.org/10.1111/j.1467-8667.2004.00352.x.
  23. Kunnath, S.K., Reinhorn, A.M. and Lobo, R.F. (1992), IDARC Version 3.0: A Program for the Inelastic Damage Analysis of Reinforced Concrete Structures, Technical Report NCEER-92-0022, National Center for Earthquake Engineering Research, State University of New York, Buffalo NY.
  24. Lakhade, S.O., Kumar, R. and Jaiswal, O.R. (2020), "Estimation of drift limits for different seismic damage states of RC frame staging in elevated water tanks using Park and Ang damage index", Earthq. Eng. Eng. Vib., 19, 161-177. https://doi.org/10.1007/s11803-020-0554-1
  25. Lu, X., Huang, Z. and Zhou, Y. (2011), "Global seismic damage assessment of high-rise hybrid structures", Comput. Concrete, 8(3), 311-325. https://doi.org/10.12989/cac.2011.8.3.311
  26. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", ASCE J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  27. Mazza, F. (2019), "A plastic-damage hysteretic model to reproduce strength stiffness degradation", Bull. Earthq. Eng., 17, 3517-3544. https://doi.org/10.1007/s10518-019-00606-3
  28. Mazza, F. (2021), "Base-isolation of a hospital pavilion against inplane-out-of-plane seismic collapse of masonry infills", Eng. Struct., 228, 111504. https://doi.org/10.1016/j.engstruct.2020.111504
  29. Naish, D., Fry, A., Klemencic, R. and Wallace, J. (2013), "Reinforced concrete coupling beams - Part II : modeling", ACI Struct. J., 110(2013), 1067-1075.
  30. Park, Y.J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-739. https://doi.org/10.1061/(asce)0733-9445(1985)111:4(722).
  31. PEER (2010), Technical Report for the PEER Ground Motion Database Web Application, Pacific Earthquake Engineering Research Center, University of California, Berkeley, U.S.A.
  32. Pejovic J., Stepinac M., Serdar N. and Jevric M. (2020), "Improvement of Eurocode 8 seismic design envelope for bending moments in RC walls of high-rise buildings", J. Earthq. Eng.,
  33. Pejovic, J. and Jankovic, S. (2015), "Dependence of RC high-rise buildings response on the earthquake intensity", J. Croatian Assoc. Civil Eng., 67(8), 749-759.
  34. Pejovic, J., Serdar, N. and Pejovic, R. (2018), "Novel optimal intensity measures for probabilistic seismic analysis of RC high - rise buildings with core", Earthq. Struct., 15(2018).
  35. Pejovic, J., Serdar, N., Pejovic, R. and Jankovic, S. (2019), "Shear force magnification in reinforced concrete walls of high-rise buildings designed according to Eurocode 8", Eng. Struct., 200(2019). https://doi.org/10.1016/j.engstruct.2019.109668.
  36. Pejovic, J.R., Serdar N.N. and Pejovic R.R. (2017), "Optimal intensity measures for probabilistic seismic demand models of RC high-rise buildings", Earthq. Struct., 13(3), 221-230. https://doi.org/10.12989/eas.2017.13.3.221
  37. PERFORM3D (2006), PERFORM 3D Nonlinear Analysis and Performance Assessment for 3D Structures, CSI Computers & Structures Inc.; Berkeley, USA.
  38. Powell, G.H. (2007), "PERFORM 3D detailed example of a tall shear wall building - nonlinear modeling, analysis and performance assessment for earthquake Loads", Comput. Struct.,
  39. Rossetto, T. and Elnashai, A. (2003), "Derivation of vulnerability functions for European-type RC structures based on observational data", Eng. Struct., 25(10), 1241-1263. https://doi.org/10.1016/S0141-0296(03)00060-9
  40. Sadraddin, H.L., Shao, X. and Hu, Y. (2016), "Fragility assessment of high-rise reinforced concrete buildingsconsidering the effects of shear wall contributions", Struct. Design Tall Spec. Build., 25, 1089-1102. https://doi.org/10.1002/tal.1299
  41. Wang, D.S., Feng, Q.M. and Wang, G.X. (2004), "A modified Park and Ang seismic damage model considering low-cycle fatigue life", China Civil Eng. J., 37(11), 41-49. https://doi.org/10.3321/j.issn:1000-131X.2004.11.007