Corrosion Science and Technology

The Corrosion Science Society of Korea (한국부식방식학회)
권호 표지
DOI QR코드

DOI QR Code

A way Analyzing Oxide Layer on an Irradiated CANDU-PHWR Pressure Tube Using an EPMA and X-ray Image Mapping

  • Received : 2021.05.28
  • Accepted : 2021.06.09
  • Published : 2021.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The oxide layer in samples taken from an irradiated Zr-2.5Nb pressure tube from a CANDU-PHWR reactor was analyzed using electron probe microanalysis (EPMA). The examined tube had been exposed to temperatures ranging from 264 to 306 ℃ and a neutron fluence of 8.9 × 1021 n/cm2 (E > 1 MeV) for the maximum 10 effective full-power years in a nuclear power plant. Measuring oxide layer thickness generally employs optical microscopy. However, in this study, analysis of the oxide layer from the irradiated pressure tube components was undertaken through X-ray image mapping obtained using EPMA. The oxide layer characteristics were analyzed by X-ray image mapping with 256 × 256 pixels using EPMA. In addition, the slope of the oxide layer was measured for each location. A particular advantage of this study was that backscattered electrons and X-ray image mapping were obtained at a magnification of 9,000 when 20 kV volts and 30 uA of current were applied to radiation-shielded EPMA. The results of this study should usefully contribute to the study of the oxide layer properties of various types of metallic materials irradiated by high radiation in nuclear power plants.

Keywords

References

  1. A. Grandjean and Y. Serruys, Metal and oxygen mobilities during Zircaloy-4 oxidation at high temperature, Journal of Nuclear Materials, 273, 111 (1999). https://doi.org/10.1016/S0022-3115(99)00036-7
  2. J. P. West, et al., Challenges for the Nuclear Fuel - A Utility Perspective in Light-Water-Reactor-Fuel-Performance, Park City Utah, ANS, Illinois, USA (2000).
  3. G. Ledergerber, S. Abolhassani, M. Limback, R. J. Lundmark, and K.-A. Magnusson, Characterization of high burnup fuel for safety related fuel testing, Journal of Nuclear Science and Technology, 43, 1006 (2006). Doi: https://doi.org/10.1080/18811248.2006.9711189
  4. J. Arborelius, M. Dahlback, L. Hallstadius, P. Jourdain, T. Andersson, R. Lisdat, M. Hahn, and E. Toscano, The Effect of Duplex Cladding Outer Component Tin Content on Corrosion, Hydrogen Pick-up, and Hydride Distribution at Very High Burnup, Journal of ASTM International, 2, 1 (2005). Doi: https://doi.org/10.1520/ JAI12411
  5. IAEA (Ed.), Waterside Corrosion of Zirconium Alloys in Nuclear Power Plants, IAEA-TECDOC No. 996, IAEA, Vienna (1998). https://www.iaea.org/publications/5651/ waterside-corrosion-of-zirconium-alloys-in-nuclear-powerplants
  6. IAEA (Ed.), Corrosion of Zirconium Alloys in Nuclear Power Plants, IAEA-TECDOC-684, IAEA, Vienna (1993). https://www.iaea.org/publications/946/corrosionof-zirconium-alloys-in-nuclear-power-plants
  7. Final Safety Analysis Report of the Wolsong Unit-1 Nuclear Power Plant, Chapter 5, Korea Electric Power Company (1982).
  8. M. K. Kumar, S. Aggarwal, V. Kain, T. Saario, and M. Bojinov, Effect of Dissolved Oxygen on Oxidation and Hydrogen Pick up behaviour-Zircaloy vs Zr-Nb alloys, Nuclear Engineering and Design, 240, 985 (2010). Doi: https://doi.org/10.1016/j.nucengdes.2009.12.021
  9. M. K. Kumar, I. Samajdar, N. Venkataramani, G. K. Dey, R. Tewari, D. Srivastava, and S. Banerjee, Explaining absence of texture development in cold rolled two-phase Zr-2.5 wt% Nb alloy, Acta Materialia, 51, 625 (2003). Doi: https://doi.org/10.1016/S1359-6454(02)00442-1
  10. D. Srivatsava, G. K. Dey, and S. Banerjee, Evolution of microstructure during fabrication of Zr-2.5 Wt pct Nb alloy pressure tubes, Metallurgical and Materials Transactions A, 26, 2707 (1995). Doi: https://doi.org/10.1007/ BF02669427
  11. M. K. Kumar, C. Vanitha, I. Samajdar, G. K. Dey, R. Tewari, D. Srivastava, and S. Banerjee, Textural and Microstructural Developments during Fabrication of Zre2.5Nb Pressure Tubes, Journal of Nuclear Materials, 335, 48 (2004). Doi: https://doi.org/10.1016/j.jnucmat.2004.07.003
  12. S. M. Sathe, Suparna Banerjee, Sunil Kumar, and D. N. Sah, Oxide morphology and hydride distribution in irradiated zircaloy-2 pressure tube, Transactions of the Indian Institute of Metals, 57, 631 (2004).
  13. Mars G Fontana, High Temperature Corrosion, Corrosion Engineering, 3rd Int. ed., p. 505, McGraw-Hill Book Company, Singapore (1987).
  14. B. Cox, Journal of Nuclear Materials, 27, 1, 1968; 29, 50-66, 638 (1969).
  15. V. F. Urbanic, B. Cox, and G. J. Field, Long Term Corrosion and Deuterium Uptake in CANDU PHWR Pressure Tubes, ASTM STP-939, pp. 189-205, Zirconium in Nuclear Industry (1987).
  16. K. Park and D. R. Olander, Oxygen Diffusion in Single-Crystal Tetragonal Zirconia, Journal of the Electrochemical Society, 138, 1154 (1991). https://iopscience.iop.org/ article/10.1149/1.2085733/pdf
  17. F. Long, L. Balogh, D. W. Braown, P. Mosbrucker, T. Skippon, C. D. Judge, and M. R. Daymond, Effect of neutron on deformation mechanisms operating during tensile testing of Zr-2.5Nb, Acta Materialia, 102, 352 (2016). https://doi.org/10.1016/j.actamat.2015.09.032