Composite Materials and Engineering

  • 제3권2호
  • /
  • Pages.117-134
  • /
  • 2021
  • /
  • 2671-4930(pISSN)
  • /
  • 2671-5120(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical solution for stability analysis of joined cross-ply thin laminated conical shells under axial compression

  • Shakouri, M. (Department of Aerospace Engineering, Semnan University)
  • 투고 : 2020.06.15
  • 심사 : 2021.02.21
  • 발행 : 2021.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present research considers the stability and corresponding modes of two axially compressed joined cross-ply laminated conical shells. The joined conical shells are the general case of a wide area of joined structures, including cylinder-cone, cone-plate, cylinder-plate, stepped thickness cone and stepped thickness cylinder. The principle of minimum potential energy is applied to extract the equilibrium equations under the thin Donnell type shell theory assumptions. The analytical procedure is used to solve the equations by applying trigonometric and series responses in circumferential and meridional directions, respectively. To ensure from accuracy and correctness of the results, the finite element analysis is done for various stacking sequences and the analytical results are compared and validated with other literature and finite element results. Finally, the effects of some parameters including semi-vertex angles, meridional lengths, number of layers and various kinds of simply supported and clamped boundary conditions at both ends are studied.

키워드

참고문헌

  1. Anwen, W. (1998), "Stresses and stability for the cone-cylinder shells with toroidal transition", Int. J. Pres. Ves. Pip., 75(1), 49-56. https://doi.org/10.1016/s0308-0161(98)00013-1.
  2. Bagheri, H., Kiani, Y. and Eslami, M.R. (2018), "Free vibration of joined conical-cylindrical-conical shells", Acta Mech., 229(7), 2751-2764 https://doi.org/10.1007/s00707-018-2133-3.
  3. Bushnell, D. and Galletly, G.D. (1974), "Comparisons of test and theory for nonsymmetric elastic-plastic buckling of shells of revolution", Int. J. Solid Struct., 10(11), 1271-1286. https://doi.org/10.1016/0020-7683(74)90072-9.
  4. Flores, F.G. and Godoy, L.A. (1991), "Post-buckling of elastic cone-cylinder and sphere-cylinder complex shells", Int. J. Pres. Ves. Pip., 45(2), 237-258. https://doi.org/10.1016/0308-0161(91)90095-j.
  5. Izadi, M.H., Hosseini-Hashemi, S. and Korayem, M.H. (2018), "Analytical and FEM solutions for free vibration of joined cross-ply laminated thick conical shells using shear deformation theory", Arch. Appl. Mech., 88(12), 2231-2246. https://doi.org/10.1007/s00419-018-1446-y.
  6. Kouchakzadeh, M.A. and Shakouri, M. (2014), "Free vibration analysis of joined cross-ply laminated conical shells", Int. J. Mech. Sci., 78, 118-125. https://doi.org/10.1016/j.ijmecsci.2013.11.008.
  7. Kouchakzadeh, M. and Shakouri, M. (2015), "Analytical solution for axisymmetric buckling of joined conical shells under axial compression", Struct. Eng. Mech., 54(4), 649-664. https://doi.org/10.12989/sem.2015.54.4.649.
  8. Moaveni, S. (2015), Finite Element Analysis: Theory and Application with ANSYS, Pearson Education, India.
  9. Patel, B.P., Shukla, K.K. and Nath, Y. (2005), "Thermal postbuckling analysis of laminated cross-ply truncated circular conical shells", Compos. Struct., 71(1), 101-114. https://doi.org/10.1016/j.compstruct.2004.09.030.
  10. Patel, B.P., Nath, Y. and Shukla, K.K. (2006), "Nonlinear thermo-elastic buckling characteristics of cross-ply laminated joined conical-cylindrical shells", Int. J. Solid Struct., 43(16), 4810-4829. https://doi.org/10.1016/j.ijsolstr.2005.07.025.
  11. Patel, B.P., Singh, S. and Nath, Y. (2008), "Postbuckling characteristics of angle-ply laminated truncated circular conical shells", Commun. Nonlinear Sci. Numer. Simul., 13(7), 1411-1430. https://doi.org/10.1016/j.cnsns.2007.01.001.
  12. Pietraszkiewicz, W. and Konopinska, V. (2015), "Junctions in shell structures: A review", Thin Wall. Struct., 95, 310-334. https://doi.org/10.1016/j.tws.2015.07.010.
  13. Qatu, M.S. (2004), Vibration of Laminated Shells and Plates, Elsevier Science, U.K.
  14. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press, Boca Raton, Florida, U.S.A.
  15. Shakouri, M. and Kouchakzadeh, M.A. (2013), "Stability analysis of joined isotropic conical shells under axial compression", Thin Wall. Struct., 72, 20-27. http://doi.org/10.1016/j.tws.2013.06.012.
  16. Shakouri, M. and Kouchakzadeh, M. (2014), "Free vibration analysis of joined conical shells: Analytical and experimental study", Thin Wall. Struct., 85, 350-358. https://doi.org/10.1016/j.tws.2014.08.022.
  17. Shakouri, M., Spagnoli, A. and Kouchakzadeh, M. (2016), "Effects of imperfection shapes on buckling of conical shells under compression" Struct. Eng. Mech., 60(3), 365-386. https://doi.org/10.12989/sem.2016.60.3.365.
  18. Sarkheil, S., Saadat Foumani, M. and Navazi, H.M. (2017), "Free vibrations of a rotating shell made of p joined cones", Int. J. Mech. Sci., 124, 83-94. https://doi.org/10.1016/j.ijmecsci.2017.02.003.
  19. Teng, J.G. (1996), "Elastic buckling of cone-cylinder intersection under localized circumferential compression", Eng. Struct., 18(1), 41-48. https://doi.org/10.1016/0141-0296(95)00114-3.
  20. Teng, J.G. and Barbagallo, M. (1997), "Shell restraint to ring buckling at cone-cylinder intersections", Eng. Struct., 19(6), 425-431. https://doi.org/10.1016/s0141-0296(96)00087-9.
  21. Teng, J.G. and Ma, H.-W. (1999), "Elastic buckling of ring-stiffened cone-cylinder intersections under internal pressure", Int. J. Mech. Sci., 41(11), 1357-1383. https://doi.org/10.1016/s0020-7403(98)00097-6.
  22. Tong, L. and Wang, T.K. (1992), "Simple solutions for buckling of laminated conical shells", Int. J. Mech. Sci., 34(2), 93-111. https://doi.org/10.1016/0020-7403(92)90076-s.
  23. Zerin, Z. (2012), "The effect of non-homogeneity on the stability of laminated orthotropic conical shells subjected to hydrostatic pressure", Struct. Eng. Mech., 43(1), 89-103. https://doi.org/10.12989/sem.2012.43.1.089.
  24. Zhao, Y. and Teng, J.G. (2003), "A stability design proposal for cone-cylinder intersections under internal pressure", Int. J. Pres. Ves. Pip., 80(5), 297-309. https://doi.org/10.1016/s0308-0161(03)00048-6.

피인용 문헌

  1. Micromechanics-integrated machine learning approaches to predict the mechanical behaviors of concrete containing crushed clay brick aggregates vol.317, 2021, https://doi.org/10.1016/j.conbuildmat.2021.125840