DOI QR코드

DOI QR Code

Impregnated Bit의 형상 최적화에 관한 연구

A Study on Shape Optimization of Impregnated Bit

  • 염광욱 (한양사이버대학교 기계자동차공학부)
  • Youm, Kwang-Wook (Division of Mechanical and Automotive Engineering, Hanyangcyber University)
  • 투고 : 2021.02.25
  • 심사 : 2021.06.04
  • 발행 : 2021.06.30

초록

광물자원의 개발 적합성을 가늠하기 위하여 굴착 장비로 지반 굴착을 통하여 코어를 채취한다. 코어를 채취하기 위해서는 시추장비의 가장 앞부분에 굴착을 위한 비트를 설치하여 직접지반을 굴착한다. 굴착을 진행 중에 드릴 비트는 지반과 직적접인 마찰로 인하여 국부에 응력을 받게 된다. 또한 마찰로 인하여 드릴 비트의 파손이 발생할 수 있기 때문에 지반의 조건에 따라 적합한 비트의 사용이 요구된다. 따라서 본 논문에서는 시추장비에 일반적으로 사용되는 세립비트를 기준으로 현재 개발 되어있는 비트의 모델을 이용하여 각각 이종재료와 동종재료의 보강재를 삽입한 새로운 비트 모델의 형상 및 재질을 비교·분석하였다. 그리고 세립비트의 형상을 각각의 형태로 모델링하여 절삭에 필요한 경도 및 항절력을 이론적 수식을 이용하여 계산하여 적합성을 확인하였다. 또한 기존의 모델과 새로운 형태의 설계모델을 Amsys Program을 이용하여 FEM해석을 실시하여 응력과 변형률을 계산한 결과, 응력이 1.92E+7Pa, 변형율 9.6E-5m/m인 응력과 변형율이 최소화된 새로운 모델을 설계하였고 그에 따른 세립비트 형상 및 구조의 최적화 설계를 진행하였다.

The core is extracted through drilling and used to evaluate the feasibility of developing mineral resources. To extract the core, a bit is installed in the forefront of the drilling device for drilling. Here, the drill bit receives stress due to direct friction against the ground. In addition, a bit appropriate for the given ground condition should be used due to the possibility of damaging a bit as a result of friction. This paper used a current bit model based on an impregnated bit and analyzed a new bit model that uses a stiffener of similar/disparate materials. The hardness and deflective strength were then evaluated by modeling the shape of impregnated bit through a calculation based on a theoretical formula. Through FEM analysis of the existing model and the new model, the stress and strain calculation results were optimized to minimize the stress and strain with a stress of 1.92 × 107 Pa and a strain of 9.6× 10-5 m/m.

키워드

참고문헌

  1. C. H. Song, K. B. Kwon, J. Y. Park, D. Y. Shin, J. W. Cho, "Optimization of Flow Path of Drill Bit Using CFD Simulation", Korean Society for Rock Mechanics Tunnel & Underground space, vol. 22, no. 4, pp. 257-265, 2012. DOI: http://dx.doi.org/10.7474/TUS.2012.22.4.257
  2. Y. J. Kim, N. S. Woo, J. K. Kwon, S. S. Kim, "A Study on the Drill Riser Behavior for Offshore Drilling System", The Korean Society of Mechanical Engineers Spring Conference paper, pp. 1707-1711, 2012.
  3. S. M. Kim, Y. S. Choi, H. D. Park, "New Outlier Top-Cut Method for Mineral Resource Estimation via 3D Hot Spot Analysis of Borehole Data", minerals, vol. 8, issue. 8, 348, 2018. DOI: http://dx.doi.org/10.3390/min8080348
  4. J. T. Hong, H. Y. Jeong, S. H. Ahn, C. Y. Joung, "Development of Precision Drilling Machine for the Instrumentation of Nuclear Fuels", Journal of the Korean Society for Precision Engineering, vol. 30, no. 2, pp. 223-230, 2013. DOI: http://dx.doi.org/10.7736/KSPE.2013.30.2.223
  5. S. C. Jung, K. W. Kim, "A study on Finite element analysis of tool deformation in End Milling", The Korea Academia-Industrial Cooperation Society, vol. 6, no. 1 pp.83-86, 2005.
  6. S. S. Lee, K. Y. Kim, H. S. Shin, "Development of Round Trip Occurrence Simulator Considering Tooth Wear of Drill Bit", Korean Society for Rock Mechanics Tunnel & Underground space, vol. 23, no. 6 pp.480-492, 2013. DOI: http://dx.doi.org/10.7474/TUS.2013.23.6.480
  7. K. B Kwon, C. H. Song, J. W. Lee, J. Y. Park, J. Y. Oh, J. W. Cho, "Drilling efficiency investigation of a drill bit by piston-drop test", The Korea Fluid Power Systems Society Conference Paper, pp. 15-20, 2013.
  8. P. Santiago, K. Murat, P. Frederic, "Development of a Tool Condition Monitoring System for Impregnated Diamond Bits in Rock Drilling Applications", Rock Mechanics & Rock Engineering, vol. 50, no. 5, pp. 1289-1301, 2017. DOI: http://dx.doi.org/10.1007/s00603-016-1150-6
  9. S. J. Heo, "Wear Mechanism and Machinability of PCD Tool in Turning Tungsten Carbides", Journal of the Korean Society of Manufacturing Technology Engineers, vol. 22, no. 1, pp. 85-91, 2013. DOI: http://dx.doi.org/10.7735/ksmte.2013.22.1.85
  10. K. b. Kwon, C. h. Song, J. Y. Park, D. Y. Shin, J. W. Cho, S. H. Cho, 2013, "Rock Fragmentation Assessment of a Drill Bit by Hopkinson Bar Percussion Test", Korean Society for Rock Mechanics Tunnel & Underground space, vol. 23, no. 1 pp. 42-53, 2013. https://doi.org/10.7474/TUS.2013.23.1.042
  11. Y. Shinmoto, K. Wada, "Experimental Study on Drilling Efficiency using Various Core Bits and a Quantification of the Core Sample Conditions", Annual Conference and General Assembly of Korean Society for Rock Mechanics, pp. 75-82, 2009.
  12. K. B. Kwon, C. H. Song, J. Y. Park, J. Y. Oh, J. W. Lee, J. W. Cho, "Evaluation of drilling efficiency by percussion testing of a drill bit with new button arrangement", International Journal of Precision Engineering and Manufacturing, vol. 15, issue. 6, pp. 1063-1068, 2014. DOI: http://dx.doi.org/10.1007/s12541-014-0437-3
  13. J. Y. Oh, G. H. Lee, H. S. Kang, C. S. Song, "Modeling and performance analysis of rock drill drifters for rock stiffness", International Journal of Precision Engineering and Manufacturing, vol. 13, issue. 12, pp. 2187-2193, 2012. DOI: http://dx.doi.org/10.1007/s12541-012-0290-1
  14. Z. Xiaojun, Li. Jingyi, Duan. Longchen, Tan. Songcheng, Fang. Xiaohong, "Effect of Fe-based pre-alloyed powder on the microstructure and holding strength of impregnated diamond bit matrix", International Journal of Refractory Metals & Hard Materials, vol. 79, pp. 115-122, 2019. DOI: http://dx.doi.org/10.1016/j.ijrmhm.2018.11.015